Shenzhen Electron Technology WT8012T Android all in one Touchscreen PC User Manual
- June 6, 2024
- Shenzhen Electron Technology
Table of Contents
Android all in one
WT8012T
User Manual
Important Notices
Copyright Information
All intellectual property rights in this publication are owned by and
protected by applicable copyright laws and international treaty provisions.
retains all rights not expressly granted. No part of this publication may be
reproduced in any form whatsoever or used to make any derivative work without
prior written approval by . Reserves the right to revise this publication,
and/or make improvements or changes in the product(s) and/or the program(s)
described in this documentation at any time without prior notice. The
information in this document is provided in good faith, but without any
representation or warranty whatsoever, whether it is accurate, or complete or
otherwise, and on express understanding that shall have no liability
whatsoever to other parties in any way arising from or relating to the
information or its use.
All other trademarks are the property of their respective owners. Other
company and brand products and service names are trademarks or registered
trademarks of their respective holders.
- Do not push objects into holes and ventilation slots.
Do not expose this product to moisture or place any objects ed with liquids on
or near the product.
Do not place a naked ame sou ce, such as lighted candles, on or near this
product.
Do not store or operate the device in environments where the temperature is
above 50 degrees celsius or below -10 degrees celsius.
Do not intentionally hit the device or place heavy or sharp objects on the
device.
Only use accessories specified by the manu acturer.
Keep the device away from benzene, diluents, and other chemicals.
Do not attempt to repair this product yourself. Always use a qualified see
vice agent to perform adjustments or repairs.
Package Contents
Please make sure all of the following are present when you unpack your DESKTOP TYPE DIGITAL SIGNAGE
Features
- 8”/10.1″LCD panel
- Resolution 1280*800
- RK 3128 Quad-core cortex A7 / RK3288 Quad-core Cortex A17
- RAM 1GB (3128) / RAM 2GB (3288)
- Internal memory 16GB
- Android 6.0(3128) / Android 8.1/10.0(3288)
- Multi-Point capacitive touch
- Microphone
- Bluetooth 4.0
- WiFi 802.11b/g/n
- RJ45 of ethernet interface
- USB for serial
- USB 2.0 host
- Type-c
- TF card, support up to 32GB
- 2*2W speaker
- Adapter:12V/1.5A
8“ Exterior Components TX
No | Function | No | Function |
---|---|---|---|
1 | Power key | 6 | Type-c |
2 | DC power supply port | 7 | TF card |
3 | 3.5mm earphone output | 8 | RJ45 |
4 | Serial port (TTL) | 9 | Microphone |
5 | USB 2.0 host |
10.1“ Exterior Components
No | Function | No | Function |
---|---|---|---|
1 | Power key | 6 | Type-c |
2 | DC power supply port | 7 | TF card |
3 | Serial port (TTL) | 8 | RJ45 |
4 | USB 2.0 host | 9 | Microphone |
5 | 3.5mm earphone output |
FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.
The device has been evaluated to meet general RF exposure requirement. The
device can be used under exposure conditions other than 20cm.