VIZULO BLACKBIRD Flood Light LED Street Luminaire Instruction Manual

VIZULO BLACKBIRD Flood Light LED Street Luminaire

Product Specifications:

• Brand : VIZULO
• Model : Blackbird flood light LED street luminaire
• Input Voltage: 200 – 240 V
• IP Rating: IP66 (Basic) / IP65 (Tool-less)
• Impact Protection: IK10
• Weight : 8.21 – 9.11 kg

Product Usage Instructions

Mounting Instructions:

1. Ensure the mounting surface is suitable and secure for installation.
2. Follow the provided mounting guide for proper installation.
3. Use the specified tools and torque values for tightening screws and connections.
4. Verify all connections are secure before energizing the luminaire.

Replacing Light Source:
Only replace the light source with the manufacturer, service agent, or a qualified person.

Caution:
Be cautious of electrical shock risks when handling the luminaire.

NEMA/ZHAGA Socket:
IP66 protection applies only to specific components, not control devices or connections.

PRODUCT OVERVIEW AND TOOLS

DIMENSIONS

ASSEMBLY INSTRUCTION

Caution, risk of electrical shock!
The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.

The luminaire should be positioned so that prolonged staring into the luminaire is not expected from a distance closer than shown in the table above.

WARNING!

• Do not touch LED modules!
• Do not put any tools or other items on LED modules!
• In case any LED is physically damaged (example shown below) the warranty is void.

Energy efficiency class of contained light source(s)

STANDARD

MCB/Inrush current table

Tridonic LED driver (No dim/Midnight dimming/DALI)

Terms of use and maintenance

Before the luminaire is turned on, it should be mounted according with this mounting instruction or any other applicable regulations.

Mounting instructions
Mounting of luminaire must be performed by a qualied person according with the following instructions:

• The warranty of the luminaire does not apply if the mounting of the luminaire has been performed in precipitation (rain, snow, hail).
• The warranty of the luminaire does not apply if a control system unauthorized by VIZULO or an inapplicable LED driver has been used to drive the luminaire.
• The warranty of the luminaire does not apply if it has been used in an unsuitable ambient temperature or has been supplied by voltage outside of the specified range.
• The warranty of the luminaire does not apply if the LED driver program hasbeen changed in any way.
• The warranty of the luminaire does not apply if the logged history data of the LED driver has been deleted of VIZULO.
• The warranty of the luminaire does not apply, if it has been mounted in unspecied angles or upside down (luminaire glass directed up), or it has been completely submerged under water.

Safety instructions

Any actions with the luminaire must be performed by a qualified person, who is certified according with national regulations and requirements. To prevent any accidents person installing the luminaire must follow national safety requirements and instructions:

• The label containing the technical parameters of the luminaire has to be studied before the work on it has begun.
• Any luminaire build or design changes are prohibited.
• The luminaire must be used in good technical condition and according with this instruction.
• Only VIZULO-authorized spare parts and accessories can be used to repair the luminaire.
• The repair of the luminaire has to be performed by a qualified and certified person.

Maintenance and repair

The luminaire has to be disconnected from the electrical grid before it is opened and/or repaired!

• The person working with the luminaire must follow national regulations and legislations that apply to the maintenance and testing of electrical or electronic appliances.
• The luminaire may need to be cleaned depending on its environment. Only a damp cloth or a sponge may be used to clean the luminaire. Use only household detergents diluted by water.
• Only VIZULO-authorized spare parts may be used for the luminaire.
• Instruction for changing spare parts must be requested from VIZULO and studied before the repair is attempted.
• LED modules, lenses and LED drivers can be changed on an installed luminaire, but it is advised to perform this task indoors to avoid water entering the luminaire.
• Spare parts (lens, LED modules and drivers) should be ordered from the information available on the luminaire label.

FAQ

Q: Can I replace the light source myself?
A: No, the light source should only be replaced by the manufacturer, service agent, or a qualified person.

Q: What is the weight of the luminaire?
A: The weight ranges from 8.21 kg to 9.11 kg.

Q: How should I handle electrical shock risks?
A: Be cautious and follow safety guidelines provided in the manual when handling the luminaire.

References

• Vizulo

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>