KODLiN K73242 Trackboard Shifter Peg Instruction Manual
- June 3, 2024
- KODLin
Table of Contents
KODLiN K73242 Trackboard Shifter Peg
Installation Instructions
for Kodlin Trackboard Shifter Peg K73240 and Brake Pad K73242
Trackboard Shifter Peg K73240
- Remove existing toe/heel shifter.
- Rub shoulder bolt through shifter arm from back side. For a heel shifter the arm may need to be removed to facilitate this.
- Using medium strength thread locker on bolt threads install bolt through washer then into shifter peg.
- Align shifter peg as needed and firmly tighten 96-144 in/lbs.
Trackboard Brake Pad K73242
- Remove the existing brake pad.
- Align the Trackboard brake pad with the brake arm.
- Using medium strength thread locker on the bolt, insert bolt thru flat washer then install a bolt through brake arm into the back of the Trackboard pad.
- Firmly tighten bolt 30-50 in/lbs. but do not over-tighten.
For the latest install guides, videos, faqs. and Tech-Tip’s scan QR code!
Revision Date: 5/18/2022 www.kodlinusa.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>