LENA LIGHTING Nameless 3 LED Light Instruction Manual
- May 15, 2024
- LENA LIGHTING
Table of Contents
LENA LIGHTING Nameless 3 LED Light
General Information
Assembly should be carried out by a qualified person.
Specifications
| Date of issue: | 20.03.2023 |
|---|---|
| Index: | 10001018 |
Cleaning and Maintenance
Dirty lenses that settle down on the diffuser can be cleaned with a damp cloth. Do not use abrasive cleaners.
Warning
We would like to inform you that our products are marked by the European
Directive 2002/96/EC and Polish Act on used electric and electronic equipment
with a symbol of a crossed-out waste container (X).
- Assembly should be carried out by a qualified person.
- Dirtiness that settles down on the diffuser due to normal operation of the fitting shall be cleaned with a damp cloth. Do not use abrasive cleaners.
Compliance
This mark informs both that at the end of the product’s life, after its
utilization, cannot be placed together with other types of household waste.
The user is obliged to return it to the point of collecting used electric
devices, at special places, where the collection points with containers
designated with the said symbol are situated.
Connection Diagrams
Example of Connection
An illustration showing a long strip of connected Terrano lighting
fixtures.
Connection Steps
- REMOVE TWO WALLS – An illustration of a connector with two removable walls.
- SCREW TOGETHER – An illustration showing the connector with one wall removed and a screw securing the two parts.
- POWER OFF – A safety reminder to ensure the power is off before proceeding with the installation.
- CONNECT SECOND LAMP – A depiction of two Terrano lighting fixtures being connected end-to-end.
Types of Connections
- L-TYPE – An illustration of an L-shaped connection with corresponding steps for removing unnecessary walls and screwing the parts together.
- T-TYPE – An illustration of a T-shaped connection with similar steps as the L-type connection.
- X-TYPE – An illustration of an X-shaped connection with the same steps for connecting the fixtures.
We would like to inform you that our products are marked by the European Directive 2002/96/CE and Polish Act on used electric and electronic equipment with a sign of a crossed-out waste container:
This mark informs abort the tact that the device, after its application use, cannot be placed together with other types of household waste. The user is obliged to return the proper system making it possible for furthe future of te equipment. Proper proceeding with the use of electric and electronic opines contributes to the avoidance of damaging consequences for the health of the inhabitants and natural environment chick result from the presence of dangerous substances and improper storage and processing of such devices and equipment.
Contact Information
- LENA LIGHTING S.A.
- ul. Kórnicka 52, 63-000 Środa Wlkp.
- POLAND
- Tel. +48 61 28 60 300
- Email: office@lenalighting.pl
- Website : www.lenalighting.pl
FAQ
-
Who should perform the installation of the Terrano Connectors?
The installation must be carried out by a qualified person. -
How can the diffuser be cleaned?
It can be cleaned with a damp cloth. Abrasive cleaners should not be used. -
What should be done with the product at the end of its lifecycle?
The product should be returned to a collection point for used electric devices, not disposed of with household waste.
LENA LIGHTING S.A.
ul. Kornicka 52, 63-000 Sroda Wikp.
POLAND
tel. +48 61 28 60 300
e-mail: office@lenalighting.pl
www.lenalighting.pl
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>