XPOWER X-430TF-430MDK Cage Dryer with Multi Cage Drying Hose Kit Instruction Manual

June 13, 2024
XPOWER

XPOWER X-430TF-430MDK Cage Dryer with Multi Cage Drying Hose Kit

XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
PRO

Introduction

XPOWER Cage Dryers, and Air Movers with Multi Drying Kits (MDKs), are specially designed for the professional pet grooming Industry. Cage Dryers are offered in two models: X–430TF w/ 430MDK and X-800TF w/ 800MDK.

With the most efficient engineering design, professional Level Multifunctional Air Movers X-430TF and X-800TF are ETUCETL Certified and are also used in many other industries.

Features:

  • Low power draw with a high-velocity air now from 3,200 to 3,600 CFM
  • Super quiet motor and super lightweight
  • Easy carrying handle and stackable up to 3-4 units high.
  • Easy and quick to disassemble for thorough cleaning and service.
  • Power cord lengths are 20′ for P models and 25′ for X models.
  • Easy cord wrap on the handle.
  • 3-hour Timer and two Filters included
  • 3-speed switch.
  • Durable and rugged housing with 1-year warranty.
  • 4 air-flow positions for other models (0″, 20′, 45′. 90°).

XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(1\)

Operations

Carefully read the Safety Instructions (page 6) before starting operations:

  1. Prior to plugging the unit Into the power source, Inspect completely for any shipping damage.
  2. Carefully place the Air Mover unit on a stable, flat dry surface.XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit- \(3\)
  3. Plug the electrical cord into the power outlet.
  4. The unit is capable of being used at 4 different angles to direct air flow, except that the unit with handle is at 3 different angles.
  5. Turn the switch to select desired speed, while making sure unit operates normally.
  6. All Air Movers in operation must be supervised at all times.

Fitters: a set of Filters is included with air mover, which will help XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(4\)prevent small debris and dust from entering the unit. To clean the filters, simply remove the filters from the unit and wash with warm soapy water, rinse with clean water and let dry thoroughly before reinstalling.

Multiple Drying Kit· 430/800 MOK

As a Cage Dryer, the Multiple Drying Kit, 430MDK I S00MDK combined with X-430TF / X-S00TF is specially designed ‘for the professional pet grooming industry.XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(5\)..

MDK installation

  1. Clamp Air Mover Adapter (A) to air outlet of the air mover. Make sure the Snap Lock Buckles on both sides or the Adapter are securely locked.
  2. Attach each Flex Hose (B) to Adapter (A) by using the Hose clamp (D). Tighten the Hose Clamp (D) with a flat head screwdriver (not induced).
  3. At the other end or each Hose (B), attach the Airflow Adjustment Door by using the remaining Hose Clamps (D).
  4. Use the cage hanger 011 the Airflow Adju.s1ment Door (C) to place the Flex Hose (B) on a desired cage.

Safety Instructions

  1. To prevent electric shock, do not operate the unit In standing water. Never plug ln or unplug the unit with wet hands or while standing In the water.
  2. To avoid the risk of injury, do not direct air flow at face or any part of body.
  3. To reduce the risk of fire or electric shock, do not use the Air Mover with any solid-state speed control device.
  4. Use only with GFCI-protected receptacles. Please contact a qualified electrician for verification and I or Install a GFCI receptacle if necessary.
  5. Do not operate any Air Mover with a damaged cord or plug. Discard the unit or return it to an authorized service facility for examination and/or repair.
  6. Unplug the Air Mover from the power supply before moving, servicing or cleaning.
  7. Do not run the power cord under the carpeting. Do not cover the power cord with throw rugs, runners, or similar coverings. Place the power cord away from the traffic area to prevent tripping.
  8. Do not allow children to play with or around an Air Mover at any lime.
  9. Do not move or carry an Air Mover while unit is operating.
  10. All Air Movers In operation must be supervised at all times.

Maintenance Instructions

  1. To keep the Air Mover clean, use a damp cloth to wipe the surface of the housing.
  2. Never clean the Air Mover with water directly.
  3. When not In use, unplug and store the Air Mover in a dry indoor place out of reach of children.
  4. Always disconnect the Air Mover from Its power source before performing any maintenance or cleaning.
  5. Clean the filters ( for units with filters) as often as necessary to avoid loss of airflow when available.

Troubleshooting

For any problems not listed below, call your local distributor or contact our Service Department:

XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(10\)

Specifications

XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(11\)

Air Mover Parts List

XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(12\)

XPOWER Limited Warranty (USA)

XPOWER’s Limited Warranty covers the unit ( excludes POWER CORD) from defects in material and craftsmanship. The Warranty covers normal use for a term of one year from the original date of purchase including parts, labor and one-way shipping. Non-contiguous states must pay for roundtrip freight. A purchase receipt must be provided.

Important!
This warranty does not cover or apply to defects due directly or indirectly to misuse, abuse, disassembly, alteration, corrosive chemicals, Improper voltage, fire, flood, negligence, accident, improperly or Incorrectly performed maintenance or repair, or failure to perform necessary maintenance or repair, or the use of this product is not in compliance with the instructions and specifications for its use.

Service
For Warranty service and parts replacement (US users only), you must:

  • A. Call 1-855-855-8868 for an RMA (Return-Merchandise-Authorization) number.
  • B. Have original proof of purchase.
  • C. Use the original undamaged packaging or an industrial-certified packaging method.

The end user will be responsible for shipping the unit (with the RMA Number showing on the shipping label) to the XPOWER Service Department. XPOWER to inspect, assess and advise the repairs needed and the applicable cost, if any.
For users outside the US, please contact XPOWER Distributor in your country or region for Warranty service and parts replacement.

WARRANTY REGISTRATION (forUSuseronly)
For your product warranty, please complete and mail/ fax this form to XPOWER MANUFACTURE, INC.
Address: 220 Clary Ave_ san Gabriel, CA 91776,
Tel: 626,286-3301
Fax: 626-285-3302
(For your convenience, register your product online at xpower.ws)

XPOWER-X-430TF-430MDK-Cage-Dryer-with-Multi-Cage-Drying-Hose-Kit-
\(13\)

www.xpower.com | 1-(855)-855-8868 | info@xpower.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals