Wiltec 64204 Camping Lamp 55W for Optimal Lighting Instruction Manual
- June 11, 2024
- wiltec
Table of Contents
Operating Manual
12-V Telescopic Outdoor Lamp
64204 Illustration similar, may vary depending on model
64204 Camping Lamp 55W for Optimal Lighting
Please read and follow the operating instructions and safety information prior
to initial operation.
Technical changes reserved!
Illustrations, functional steps, and technical data may deviate
insignificantly due to continuous further developments.
The information contained in this document may alter at any time without prior
notice. No part of this document may be copied or otherwise duplicated without
prior written consent. All rights reserved. WilTec Wildanger Technik GmbH
cannot be held liable for any possible mistakes in this operating manual, nor
in the diagrams and illustrations shown.
Although WilTec Wildanger Technik GmbH has made every possible effort to
ensure that this operating manual is complete, accurate, and up-to-date,
errors cannot be ruled out entirely.
If you have found an error or wish to suggest an improvement, we look forward
to hearing from you. Send us an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in several languages can be found in
our online shop:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler – Germany
To return your goods for exchange, repair, or other purposes, please use
the following address. Attention! To allow for a trouble-free complaint or
return, it is important to contact our customer service team before returning
your goods.
Retourenabteilung
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler – Germany
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
Introduction
Thank you for choosing to purchase this quality product. To minimise the risk
of injury, we ask you to always take some basic safety precautions when using
this product. Please read this operating manual carefully and make sure that
you understand it.
Keep these operation instructions in a safe place.
Safety instructions
Attention! Danger of electric shock!
-
Do not use the extension cable near water or near possible water accumulation.
-
Keep a safety distance of at least 15 m between the working lamp and a pond.
-
Keep plugs and sockets dry. Only use three-conductor outdoor extension cables with earthed plugs and earthed sockets.
-
Warning! Prevention of fire, electric shocks, and injuries!Do not look directly into a switched-on lamp to avoid injuries of the eye.
-
Do not touch the luminous plate directly with sharp objects.
-
Always keep the work lamp away from flammable objects or materials.
-
Before using the lamp, check it to detect possible damaged or worn components. Damaged parts interfere with the correct operation of this lamp. Damaged or worn parts need to be replaced immediately. If repairs need to be made, contact a professional
electrician. -
Do not clean this item with a high-pressure washer.
-
Do not modify this work lamp. Unauthorised modifications might impair the functionality and/or safety of use and reduce the lifetime of the product. This work lamp has been designed for specific purposes.
-
When not in use, keep the lamp in a safe place out of children’s reach. Before storing the lamp and before re-using it, check it for functionality.
Technical specifications
| Power (W) | 55 |
|---|---|
| Lumen (lm) | 11000 |
| Voltage (V) | 12 |
| Size (㎝) | 22 × 13.7 |
| Microchip | Highly intensive surface-mounted device (SMD) |
Parts
| № | Name |
|---|---|
| 1 | Switch on/stand-by mode |
| 2 | Lighting mode |
| 3 | Dynamic-mode switch |
| 4 | Adjustment of luminosity |
| 5 | Adjustment of dimmer |
| 6 | Adjustment of stroboscopic light/speed |
| 7 | Bag |
| 8 | Telescopic tripod bar |
| 9 | Remote control |
| 10 | Luminous plate |
| 11 | Cable (5 m) |
| 12 | Battery clamp |
| 13 | LED receiver |
| 14 | Cigarette-lighter plug |
Step 1 — Stick the luminous plate onto the bayonet socket of the threaded
post. Step 2 — To adjust the length of the bar, adjust the joint head of
the bar. Step 3 — Adjust the jointhead of the tripod andopen the tripod.
Step 4 — To fix, push the stand downwards. Step 5 — The plug on the
one side of the 5-m cable can be connected to the socket on the other side of
the receiver.
Step 6 — Fix by rotationto avoid that it slips out. Step 7 — Connect the S
plug on one side of the receiver with the S socket of the luminous plate.
Step 8 — The plugs on the other side of the 5-m cable can be connected to
the sockets of the battery clamps. Step 8.1 — Connect to the power supply …
Step 9 — … or connect with the cigarette-lighter plug. Step 9.1 —
Connect to acigarette lighter. Step 10 — To use the remote control, first
remove the insulating foil; re-place when the remote control is not used.
Maintenance
Your work lamp requires but little care and maintenance. Regularly clean the
plates with a non-abrasive cleaning agent. Apply the same care to the bar and
holder.
Warning! Always make sure that the lamp is disconnected from the power
supply and has cooled down completely before cleaning it.
Regulations for waste disposal
The Waste Electrical and Electronic Equipment Directive (WEEE Directive,
2012/19/EU) of the EU was implemented in the German law related to electrical
and electronic equipment and appliances.
All WilTec electric devices that fall under the WEEE directive are labelled
with the symbol of a crossedout wheeled rubbish bin. This symbol indicates
that this electric device must not be disposed of with the domestic waste.
WilTec Technik GmbH is registered with the German registration authority EAR
(Stiftung ElektroAltgeräte Register) under the WEEE-registration number
DE45283704.
Disposal of used electrical and electronic devices (intended for use in the
countries of the European nion and other European countries with a separate
waste collection system for these devices). The symbol on the packaging or the
product itself indicates that this product must not be treated as normal
domestic waste but must be disposed of at a recycling collection station for
electrical and electronic waste.
By disposing of this product correctly, you contribute to the protection of
the environment and the health of your fellow people. Inappropriate disposal
threatens the environment and health. Material recycling helps to reduce the
consumption of raw materials.
Additional information about the recycling of this product can be provided by
your local commune, the municipal waste disposal facilities, or the store
where you purchased the product.
Important note:
Reproduction and any commercial use (of parts) of this operating manual,
requires a written permission of WilTec Wildanger Technik GmbH.
Address:
WilTec Wildanger Technik GmbH
Königsbenden 12 / 28
52249 Eschweiler Germany
© by WilTec Wildanger Technik GmbH
http://www.wiltec.de