DYLECT DTPWTB1800 ULTRA Power High Pressure Car Washer Pump Owner’s Manual

DYLECT DTPWTB1800 ULTRA Power High Pressure Car Washer Pump

Owner’s manual
HIGH PRESSURE WASHER

DTPWTB1800
ULTRAPOWER

WARNING: Do not use the appliance without reading the instruction sheet.

Scan for Warranty Registration and Customer Support

IMPORTANT SAFETY TIPS

• Never point the high-pressure nozzle at people or animals.
• Never drink alcohol or use drugs while operating the pressure cleaner.
• Never operate the pressure cleaner while standing in water.
• Never touch the electrical plug with wet hands.
• Never let electrical connections rest in water.
• Never operate pressure cleaner without the water turned on.
• Never use hot water with this pressure cleaner.

IMPORTANT SAFETY PRECAUTIONS

WARNING: When using this product, basic precautions should always be followed, including the following:

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
The machines must not be used by children. Children should be supervised to ensure that they do not play with the appliance.

For commercial use
This machine must not be used by persons (including children) with reduced physical, sensory or mental skills or lack of experience and knowledge.

Not for commercial use
This machine can be used by persons with reduced physical, sensory or mental abilities Or lack of experience and knowledge when they are supervised or safe
Use of the machine and understand the resulting dangers.
Use suitable personal protective equipment (PSA) for high-pressure cleaners in operation, Eg safety shoes, protective gloves, protective visors, hearing protection, etc.,
Operation of the appliance;

Caution: Danger of recoil forces and the suddenly occurring torque on the nozzle when the spray gun is opened;

WARNING: This machine has been developed for the use of the detergent supplied or
recommended by the manufacturer. The use of other cleaning agents or chemicals can affect the safety of the machine.
Warning: High pressure jets can be dangerous if used improperly. The beam must not be directed at persons, active electrical equipment or on the machine itself.
Do not use the appliance with people within its range of action unless they are wearing protective clothing.

• Do not point the jet at yourself or others to clean clothing or footwear.

• Disconnect the power supply before carrying out maintenance by the user.

• High pressure cleaners must not be operated by children or unskilled persons.

• To ensure the machine safety, only original spare parts from the manufacturer or use spare parts approved by the manufacturer.

• Do not use the appliance if a power cable or important parts of the appliance are damaged, e.g. Safety devices, high pressure hoses, spray gun.

• If the extension cord is used, the plug and socket must be waterproof.

• WARNING: Unsuitable extension cables can be dangerous,if an extension cable is used,it must be suitable for outdoor use,and the connection must be kept dry and off the ground.Use of a power cable reel which keeps the socket at least 60mm above the ground is strongly recommended.

• Switch the appliance off and disconnect it from the power supply before assembly,cleaning,adjustments, maintenance,storage and transportation.

• The electric supply connection must be made by a qualified electrician and comply with IEC 60364-1.Either a residual current device that will cut off the power supply if the leakage current to earth exceeds 30 mA for 30 ms or a ground fault interrupt device must be installed. WARNING: Do not use the machine if a connecting cable or important parts of the machine are damaged, Eg safety devices, high pressure hoses, spray gun.

• The machines are not suitable for connection to portable water pipes. Connect the machine to the water supply.

• Use the device on a flat surface.

• For security reasons, make sure you have a three-month control and maintenance. Before use, make sure that the filter and the nozzle. Make sure there is no contamination. After use, make sure there is no water in the pump and hose.
  overload protection:

• When the nozzle is stuffed or the high pressure hose is knotted, the overload protection function automatically and the machine is switched off.

• After solving the fault, tum the switch back on and tum the machine back on.

1.     Read all instructions before using the product. Save all safety instructions.

2.     Do not operate the pressure cleaner when fatigued or under the influence of alcohol or drugs.
3.     Risk of injection or injury – do not direct the high pressure water stream at any people or animals.
4.     Do not allow children to operate the pressure cleaner at any time.
5.     To reduce the risk of injury, close supervision is necessary when the pressure cleaner is used near children.
6.     Know how to stop the unit and reduce pressure immediately. Be completely familiar with the controls.
7.     Stay alert – always be aware of where you are directing the high pressure spray
8.     Keep cleaning area clear of all people.
9.     Keep good footing and balance at all times – do not overreach or stand on an unstable support.
10.     The work area should have adequate drainage to reduce the possibility of a fall due to slippery surfaces.
11.     Follow the maintenance instructions specified in the manual.
12.     To reduce the risk of electrocution, keep all connections dry and off the ground. Do not touch plug with wet hands.
13.     Adequate information about the nozzle to be used,the danger of the kickback force and the sudden torque on the spray assembly when opening the trigger gun
14.     It is recommended that the electric supply to this machine should include either a residual current device that will interrupt the supply if the leakage current to earth
exceeds 30 mA for 30 ms or a device that will prove the earth circuit

15.     WARNING Do not use the machine within range of persons unless they wear protective clothing
16.     WARNING Risk of explosion – Do not spray flammable liquids
17.     WARNING High pressure hoses, fittings and couplings are important for the safety of the machine. Use only hoses, fittings and couplings recommended by the manufacturer
18.     Water that has flowed through a backflow preventer is considered non- potable.

GENERAL SAFETY PRECAUTIONS

1.     Intended for outdoor and household use only.

2.     High-pressure hose can develop leaks from wear, abuse, kinking etc. Do not use a damaged hose.
3.     Do not use the pressure cleaner in areas near combustible materials, combustible fumes, or dust.
4. Some chemicals or detergents may be harmful if inhaled or ingested causing severe injury. Use a respirator or mask whenever there is a chance that vapors may be inhaled. Read all instructions included with the mask so you are certain the mask will provide the necessary protection against inhaling harmful vapors .
5.     Before starting the pressure cleaner in cold weather, check all of the parts of the equipment and be sure that ice has not formed. Do not store the unit anywhere that the temperature will fall below O ‘C (32°F ).
6. DO NOT MAKE ANY MODIFICATIONS TO ANY OF THE COMPONENTS! Units with broken or missing parts, or without the protective housing or covers should NEVER be operated
7.     Keep the high-pressure hose connected to the pressure cleaner and the spray gun while the system is pressurized. Disconnecting the hose while the unit is pressurized is dangerous, and may cause injury.
8.     Always turn off the power disconnector when the machine is left unattended.
9     Keep water spray away from electrical wiring or fatal electric shock may result.
10     Must be connected to the water supply before use.then open gun trigger and open the cleaner switch.
11     After the machine long-stalled again before use, please dial the few motor power is in the state of the impeller, and then start the machine according to operation instruction

SYMBOLS

The labels on your tools and manual may show symbols. These represent important information about the product or instruction on its use.

SERVICING OF A DOUBLE-INSULATED APPLIANCE
In a double-insulated product, two systems of insulation are provided instead of grounding. No means of grounding is provided on a double-insulated product, nor should a means for grounding be added to the product. Servicing a double- insulated product requires extreme care and knowledge of the system, and should be done only by qualified service personnel. Replacement parts for a double-insulated product must be identical to the parts they replace. A double-insulated product is marked with the words “DOUBLE INSULATION” or “DOUBLE
INSULATED”. This symbol [ ] may also be marked on the product.

USE OF EXTENSION CORDS
Use of an extension cord with this product is NOT RECOMMENDED. If you must use an extension cord, use only extension cords that are intended for outdoor use. These cords are identified by a marking “ACCEPTABLE FOR USE WITH OUTDOOR APPLIANCES, STORE INDOORS WHILE NOT IN USE.” Use only extension cords having an electrical rating not less than the rating of the product. Examine extension cord before use. DO NOT USE DAMAGED EXTENSION CORDS! Do not pull on cord to disconnect from receptacle, always disconnect by pulling on plug. Keep cord away from heat and sharp edges. Always disconnect the extension cord from the receptacle before disconnecting the product from the extension cord.

WARNING – To reduce the risk of electrocution, keep all connections dry and off the ground.Do not touch the plug with wet hands.

PROPER USE OF THE PRESSURE CLEANER
THIS UNIT IS INTENDED FOR USE WITH COLD WATER ONL YI
DO NOT USE HOT WATER IN THIS PRESSURE CLEANER.

1.     Operate the pressure cleaner at no more than the fluid pressure rated for the pressure cleaner. Never run the pressure cleaner without a water supply. Running the unit without a water supply will cause irreparable damage to the unit.

2.     Make sure that the water supply you use for the pressure cleaner is not dirty, sandy, and does not hold any corrosive chemical products. Using a dirty water supply will compromise the long life of the pressure cleaner.
3.     CAUTION – The pressure cleaner can be used for a variety of applications including washing cars, boats, patios, decks, garages etc. where high pressure is necessary to remove dirt and debris.

High-pressure water flow can damage the work surface if not used properly! See the section titled “Operating Instructions” for more details. Always test the spray in an open area first.

4.     NEVER move the unit by pulling on the high pressure hose. Use the handle provided on the top of the unit.
5.     Always hold the high pressure gun and wand with two hands. Keep one hand on the gun/trigger, while supporting the wand with the other hand (see diagram).
6.     When dispensing detergent, the pressure cleaner applies detergent to the cleaning area at low pressure only. Once the detergent has been applied, spray the detergent off of the work area by using the adjustable nozzle.

ASSEMBLY INSTRUCTIONS

Unpacking the Carton
After opening the carton, please remove all parts and check them against the following list of components that are included:

1. Accessories holder
2. Gun holder
3. Handle
4. Detergent Bottle
5. Water inlet connector
6. Adjustable nozzle
7. Extension Wand
8. Gun
9. Cleaning pin
10. High pressure hose
11. Power washer unit
12. Wheel

Due to transportation and packaging, some of the accessories may be supplied disassembled. Please follow the assembly instructions.

The machine is always with handle to transport.

1. Step 1

   • Insert the extension wand(?) into the gun(8). Push and turn the extension wand(?) clockwise onto the gun(8) until hand tight to lock it in place. When the pieces are joined properly, you cannot separate the two components by pulling straight out on the gun(8). Insert the detergent nozzle in the same manner, depending upon which attachment is best suited to the surface you are cleaning. Only one attachment can be inserted into the gun at a time. All attachments must be inserted into the gun for proper use.(Fig.1)
   • Insert the spray adjustable nozzle(6) into the extension wand(?), as quick-connect type , you just need push it onto extension wand(?) directly and powerful until hand tight to lock it in place. When the pieces are joined properly, you cannot separate the two components by pulling straight out on the extension wand(8). Insert the Turbo nozzle in the same manner, depending upon which attachment is best suited to the surface you are cleaning. Only one attachment can be inserted into the.extension wand(?) at a time. All attachments must be inserted into the extension wand(?) for proper use. (Fig.2)

2. Step 2
   Screw the handle tight to the main body as below fig.The screws will be packed together with the manual , pis kindly check and find it when unpacked.

3. Step 3
   Install gun holder,
   Install wheel and screw the accessories holder to the main body as below fig, the screws will be packed together with the manual , pis kindly check and find it when unpacked.

4. Step 4
   Attach the high pressure hose to the pressure cleaner water outlet. Insert and quick-connect it tight to avoid leakage.When the pieces are joined properly, you cannot separate the two components by pulling straight out from the water outlet. Push the “Button” according to the direction of arrow, then you can pull out the high pressure hose. (Fig.3)

5. Step 5
   Attach the high pressure hose(10)to the gun(8). Insert and quick-connect it tight to avoid leakage.When the pieces are joined properly, you cannot separate the two components by pulling straight out from the gun(8) Push the hose lock button, then you can pull out high pressure hose. (Fig.4)

6. Step 6
   Insert the detergent nozzle(4) into the gun(8). Push and turn the detergent nozzle(4) clockwise onto the gun(8) until hand tight to lock it in place. When the pieces are joined properly, you cannot separate the two components by pulling straight out on the gun(8).

7. Step 7
   Attach the hose connector to pressure washer. Before attaching the connector to the male fitting, remove the plastic cap, which is inserted onto the male fitting on the pressure washer before shipping. This plastic cap can be discarded once removed. After both components have been installed, attach the garden hose with connector screw on the pressure washer. Connect the garden hose to the waterspout.
   WARNING: Garden hose can not be damaged and leak, Inner diameter less than 1/2 “inches ,the length can not be greater than 8m.

OPERATING INSTRUCTIONS

WARNING:THIS UNIT IS INTENDED TO BE USED WITH COLD WATER ONLY! DO NOT USE HOT WATER IN THIS PRESSURE CLEANER!
WARNING:High pressure hose must not loop.

Warning-danger!
During operation the appliance must be positioned on a firm,stable surface.

Starting Up
Warning: ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water supply. Serious damage could occur to the motor if the unit is run without water.

1. Turn on the water supply tap fully.
2. Unlock trigger (by pressing the safety button first and then actuate the trigger) for a few second ; let the water flow out from the nozzle.
3. Check if water leaks from joints. If water leaks, please reconnect the water hose, the spray gun or the lance to make sure each accessory are connected perfectly.
4. Connect to power supply.
5. Set the power switch at the position “l”.(Fig.5)
6. Actuate the trigger and start the washer.

WARNING! Check that the supply voltage and frequency correspond to those specified on the appliance data plate. The appliance should only be connected to a mains power supply via a security breaker (Max.30mA) to cut off the electricity supply in the instance of a short circuit.

Stopping the washer
Warning: ALWAYS turn off the unit’s motor BEFORE turning off the unit’s water supply.
Serious damage could occur to the motor if the unit is run without water.

1. Release the trigger,the motor will stop operation.
2. Set the switch at the position” O”.(Fig.5)
3. Disconnect the plug from the socket.

WARNING! Failure to follow the above instructions may cause damage to the machine.

Changing accessories

1. Release the trigger.
2. Turn off the power switch (the position” O”).(Fig.5)
3. Disassemble the original adjustable Nozzle.
4. Mount the adjustable Nozzle and Detergent Bottle.

CAUTION: Never disconnect the high -pressure discharge hose from the machine while the system is still pressurized . To depressurize the unit, turn off the motor,turn off the water supply and squeeze the trigger 2-3 times.

INFORMATION FOR USAGE

1. Safety valve and/or pressure limiting valve
   Warning-danger!
   Do not tamper with or adjust the safety valve setting.
   The safety valve is also a pressure limiting valve.When the gun trigger is released.the valve opens , pressure switch action, the machine automatically shut down.a
   If the gun nozzle is blocked, will cause the machine pressure rises, the safety valve opens, the pressure switch action, the machine automatically shut down, you can refer to the following point 7 to use a needle to clean the nozzle.

2. The safety button of gun
   The operator need press the unlock button and then actuate the trigger to do the spray operation.When you release the trigger, it can return to the off position automatically.
   When not using the pressure cleaner, press the lock button to keep from accidentally engaging the high pressure spray.

3. Hold the gun
   Whenever you use the high pressure washer , we suggest you grip the in the right position,with one hand on the handle and the other on the adjustable spray nozzle.

4. Using detergent
   Add detergent to the tank. Assemble the tank with detergent dispenser.
   Insert the end of detergent dispenser with plastic tab into the opening of spray gun,push and turn in the clockwise direction to lock the detergent dispenser and spray gun togeter. The use of detergents can dramatically reduce cleaning time and assist in the removal of difficult stains. Some detergents have been customized for pressure washer use on specific cleaning tasks.These detergents are approximately as thick as water.The use of thicker detergents.such as dish soap,will clog the chemical injection system and prevent the application of the detergent.
   The cleaning power of detergents comes from applying them to a surface and ,giving the chemicals time to break down the dirt and grime.Detergents work best when applied at low pressure.

5. Water inlet screen
   The water inlet filter must be inspected regularly,so as to avoid blockage and restriction in the water supply to the pump.

6. Adjustable Spray Nozzle
   The adjustable nozzle will allow you to use any variety of spray patterns from a full fan spray (diagram 1) to a direct stream spray (diagram 2). When using the pressure cleaner to clean wood decks, siding, vehicles etc., always start using the fan spray and begin spraying from a minimum 36″ away to avoid damaging the surface of the material you are cleaning. Always begin by spraying in a testing area free and clear of people and objects. (Fig.6) Warning: High pressure jets can be dangerous if subject to misuse. The jet must not be directed at persons, live electrical equipment or the appliance itself.
   Do not direct the jet against yourself or others in order to clean clothes or foot-wear.

7. Cleaning pin instruction
   Using included nozzle cleaner tool, insert wire into the nozzle hole and move back and forth until debris is dislodged. (Fig.7)

MAINTENANCE AND STORAGE

Shutting Down the Pressure Cleaner

WHEN FINISHED USING THE PRESSURE CLEANER, FOLLOW THESE STEPS TO SHUT DOWN THE UNIT:

• Turn the pressure cleaner to the OFF position, Unplug the power cord from the wall outlet.
• Turn off the water supply.
• Before disconnecting high-pressure hose connection, point the gun in a safe direction and discharge the high-pressure water.
• Disconnect high-pressure hose from the pressure cleaner and gun.
• Disconnect garden hose from the pressure cleaner.
• Remove quick coupler fitting from garden hose and attach to the nipple portion of the fitting installed on the pressure cleaner for storage.
• Remove excess water from the pump by tipping the unit on both sides to drain any remaining water from inlet and outlet fittings.
• Remove Water Intake Filter and flush with water to remove dirt or debris. Return filter once cleaned.
• Drain detergent reservoir and flush with running water.
• Wipe away any remaining water on all parts and fittings.
• Engage the gun safety lock.
• Store the pressure cleaner, parts, and accessories in an area with a temperature° above o·c (32 F).

Winterizing and Long-Term Storage

FOLLOW ALL OF THE ABOVE SHUT-DOWN PROCEDURES, ADDING THE FOLLOWING STEPS ….

• After disconnecting the water supply, and before disconnecting the high-pressure hose, turn the pressure cleaner on for 2-3 seconds, until any remaining water in the pump exits. TURN UNIT OFF IMMEDIATELY.

CONTINUED USE OF THE PRESSURE CLEANER WITHOUT WATER SUPPLY ATTACHED WILL CAUSE SEVERE DAMAGE TO THE UNIT!

• Always store the pressure cleaner, parts, and accessories in an area with a temperature above o·c (32°F).

WARNING: FAILURE TO COMPLY WITH THESE STORAGE INSTRUCTIONS WILL RESULT IN DAMAGE TO THE PUMP ASSEMBLY.

Maintenance

• This pressure cleaner is supplied with a closed lubrication system, so no addition of oil is needed.
• Check all hoses and accessories for damage prior to use.
• Check the inlet filter periodically for deposits. Clean this filter regularly for maximum performance.

CLEANING TIPS

WARNING: ALWAYS TEST THE SPRAY IN AN AREA FREE AND CLEAR OF PEOPLE AND OBJECTS BEFORE YOU SPRAY AT THE INTENDED CLEANING SURFACE.

• Wood and Vinyl Decks
  Rinse deck and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. For optimal results, reduce your work area to smaller sections and clean each section one at a time. Allow the detergent
  to rest on the surface for a few minutes and then rinse at high pressure. DO NOT LET THE CLEANSER DRY. Always clean from left to right and top to bottom for best results. Rinse at high pressure using the fan spray keeping the tip of the spray nozzle at least 6-9 inches from the cleaning surface. Maintain a further distance from the cleaning area when using a direct spray. Caution: For softer woods, increase the distance from the cleaning area.

• Cement Patios, Stone, and Brick
  Rinse cleaning and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. Rinse at high pressure using the fan spray in a sweeping motion keeping the tip of the spray nozzle at least 3-6 inches from the cleaning surface. Maintain a further distance from the cleaning area when using a direct spray.

• Cars, Boats, and Motorcycles
  Rinse cleaning and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. To achieve the best results, clean one side at a time. Allow the detergent to rest on the surface for a few minutes, but do not let the detergent dry. Rinse at high pressure using the fan spray in a sweeping motion keeping the tip of the spray nozzle at least 8 inches from the cleaning surface. Maintain a further distance from the cleaning area when using a direct spray. Wipe surface dry for a polished finish.

• Barbecue Grills, Power Equipment, and Garden Tools
  Rinse cleaning and surrounding area with fresh water. If using detergent, fill the detergent reservoir and apply to the area being cleaned at low pressure. Allow the detergent to rest on the surface for a few minutes, but do not let the detergent dry. Rinse at high pressure using the fan spray keeping the tip of the spray nozzle at least 1-3 inches from the cleaning surface. Maintain a further distance from the cleaning area when using a direct spray.

TECHNICAL DATA

DYLECT – India E-Waste Program
Be a Responsible User. Recycle or refurbish your old Amazon brand products to help protect the environment. The crossed-out bin symbol on this product or its packaging signifies that this product should be discarded separately from ordinary household waste at its end of life. Be aware that it is your responsibility to dispose-off e-waste in such a manner that no damage to human health and environment occur.

E-waste is generated from electronic and electrical appliances/components which have reached their end-of-life period or are no longer fit for their original intended use and are destined for recovery, recycling or disposal. E-waste when disposed or recycled improperly, can cause severe environmental pollution and adversely affect the human body as they contain toxic chemicals. Please ensure that the electronic products that are unwanted, not working, and nearing or at the end-of-life are disposed-off only through authorized recycling or refurbishing points. Please contact your municipal waste management authority or your household waste disposal service for additional details. This product and the components thereof conform to the provisions of hazardous substances specified under Rule 16 (1) and Rule 16 (4) of E-waste (Management) Rules, 2022 [Chapter VII titled the Reduction in the Use of Hazardous Substances in the manufacture of electrical and electronic equipment and their components or consumables or parts or spares].

Warranty & Service

1. We grant [1] years warranty on the product commencing from the date of purchase against defects in manufacturing, materials, and assembly.
2. Within the warranty period, we will correct any defects in materials or workmanship, either by repairing or replacing the complete appliance, as we may choose, free of charge. This warranty is valid to the original purchaser only.
3. For customer service related queries, please contact us: (1800-258-6618] (available Monday to Saturday from 9:30 AM to 6:00 PM except national holidays). For warranty details, please visit the product page or call customer service number.

Scan for Warranty Registration and Customer Support

This Warranty excludes, or does not apply or becomes void if :

1. Damage is caused by improper use, abuse or excessive use outside the intended purpose.
2. Normal wear or use as well as defects that have a negligible effect on the value or operation of the appliance.
3. repairs or product modifications have been carried out by unauthorized organization or persons and if original Amazon brand parts are not used.
4. Consequential damages (including but not limited to loss of data or loss of income), nor compensation for activities done by yourself.
5. The proof-of-purchase has been altered in any way or is made illegible.
6. The model number, serial number or production date code on the product has been altered, removed or made illegible.
7. The defect is caused by connecting peripherals, additional equipment or accessories other than those recommended in the user manual.

TROUBLESHOOTING TIPS

WHEN THE SWITCH IS IN THE “I” POSITION THE MACHINE WILL NOT START

• PROBABLE CAUSE
  • Electrical socket is faulty
  • Voltage is inadequate
  • Power cord is not plugged in
• SOLUTION
  • Check plug, socket, fuses
  • Check whether the voltage is adequate
  • Plug in power cord

THE PUMP DOES NOT REACH ADEQUATE PRESSURE OR FLUCTUATES

• PROBABLE CAUSE
  • Water inlet filter is clogged
  • Pump is drawing air
  • Suction valves are clogged/worn
  • Diameter of garden hose too small
  • Water supply is restricted
  • Insufficient water supply
• SOLUTION
  • Remove and clean filter
  • Tighten connections/bleed system
  • Clean or replace valves
  • Replace with ¾ inch garden hose
  • Check hose for kinks or leaks
  • Fully open water source

THE PRESSURE CLEANER HAS OR WILL NOT MAINTAIN PRESSURE

• PROBABLE CAUSE
  • Excessive air in waterline and pump
• SOLUTION
  • Turn unit and water supply off/
  • Bleed system/Hold trigger down

THE PRESSURE CLEANER MAKES EXCESSIVE NOISE

• PROBABLE CAUSE
  • Intake is blocked
  • Valves are worn, dirty, or clogged
  • Filter is dirty
• SOLUTION
  • Check the intake valves
  • Check, clean or replace valves
  • Check, clean, or replace filter

THE MOTOR STOPS RUNNING WHILE IN USE

PROBABLE CAUSE SOLUTION
Net voltage lower than suggested Check whether the voltage is adequate

DTPWUM03-2023

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>