STKR FLI-PRO Telescoping Light Instruction Manual

STKR FLI-PRO Telescoping Light Instruction Manual

POWER/MODE BUTTON

• Press to turn ON
• Press to change mode:
  1. Spotlight
  2. Flood Light
  3. Red Flood Light
  4. Flashing Red Flood Light
  5. Flashing Flood Light
  6. Off
• After 5 seconds of no mode change, next button press is OFF

CHANGE BRIGHTNESS

Press & HOLD to increase/decrease brightness

• Light blinks to indicate minimum or maximum
• brightness level.

MODE RECALL

FLi-PRO Telescoping Light remembers the last used light mode. After 5 seconds of no mode change, next Power Button press is OFF. When pressed again the light will recall last used light mode.

WIRELESS REMOTE

Wireless remote works up to 15′(4.5m) from

• flashlight head Independently control light modes and
• brightness When not in use magnetically attach remote to
• base of tripod

FLI-PRO FLASHLIGHT

TELESCOPING ROD

WIRELESS REMOTE

TRIPOD

BATTERY LEVEL INDICATOR Power button battery level indicator LEDs turn on for S seconds when light is turned on or off.

100-60% Green
59-25% Yellow
24-10% Red
9-0% Flashing Red

CHARGING

1. Remove USB-C port cover 2) Plug the USB-C cable into the USB-C port 3) plug the other end of the cable into a USB wall charger, USB car charger, or any other USB charging device (e.g. computer). Not induded. *Charger output of up to 3A is recommended. Charger output should NOT exceed 3.6A to prevent battery damage.
   — Battery Level Indicator lights blink while charging then solid glow when fully charged.
   **Please recharge a stored unit every four months to maintain optimum performance of the lithium-ion batteries and maximize charging levels. Batten, excL from warranty.

REPLACEABLE BATTERY

Over time battery degradation may occur.To replace a worn out cell follow these steps: 1) Unscrew handle 2) Carefully unplug battery 3) Replace 21700 Lithium-ion recharge-able battery with 1ST connector (to match original battery capacity use 4000mAh, available on our website.) 4) Plug battery connector into terminal 5) Screw handle back on.

LED SAFETY WARNING

This product contains high intensity LED devices.To prevent permanent eye damage, do not stare into the light beam at close range.

LIGHTNING STRIKE HAZARD WARNING

DO NOT USE during a thunderstorm. Before a thunderstorm approaches ensure the FLi-PRO Telescoping Light is stored safely. If you are caught outside during a thunder-storm DO NOT STAND NEAR the FLi-PROTelescoping Light. STAY A SAFE DISTANCE AWAY from the FLi-PRO Telescoping Light as it can act as a lightning rod. Use all lightning safety measures. Not following thunderstorm/lightning precautions can result in serious injury or death.

SPECIFICATIONS

Model # 12679

LIGHT
1200 Total Max True-Lumens
Flood Light: 1200 Lumens (Daylight White) or Red Light
Spotlight: 400 Lumens (Daylight White)
RUNTIME
Spotlight: 4.5 hours (100% brightness)
Flood Light: 1.5 hours (100% brightness)
BATTERY
21700 Rechargeable Lithium-ion
Capacity: 4000mAh
OTHER
IPX6 Waterproof Rating
Total Weight: 1.91b (0.86Kg) [battery incl.]

PACKAGE CONTENTS

[1] FLi-PRO Flashlight
[1] Telescoping Rod
[1] Tripod
[1] Wireless Remote
[1] USB-A to USB-C Cable
[1] Carrying Bag

1 Year warranty

FCC Statements

This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This device generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this device does cause harmful interference to radio or television reception, which can be determined by turning the device off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the device and receiver.
• Conned the device into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation

QUESTIONS? Before returning to your retailer, call our customer service department at 704-508-1031, 8 a.m. – 5 p.m. ET, Monday – Friday or email us at info@STKRconcepts.com

704-508-1031 | info@STKRconcepts.com | STKRconcepts.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>