PHILIPS BGP291 Lumi Street Gen2 Owner’s Manual
- June 10, 2024
- Philips
Table of Contents
PHILIPS BGP291 Lumi Street Gen2 Owner’s Manual
Streetwise gen 2
BGP291 LED22-4S/830 II DM10 MSP CLO SRTH
Streetwise gen2 Micro, LED module 2200 lm, 830 warm white, Safety class II,
Distribution medium 10, Post-top for diameter 48 mm
Increasing numbers of municipalities are having to upgrade large-scale conventional street lighting installations with energy efficient LED technology. But they are having to do this with smaller and smaller budgets. That’s why the new generation of LumiStreet has been upgraded and designed to provide a solution to this challenge, it is the ideal solution for performing point-to-point replacement of conventional lighting. LumiStreet gen2 achieves this by offering high efficiency, low Total Cost of Ownership, and ease of installation and maintenance. The ease of installation and maintenance is enabled by the Philips Service tag. Moreover, the Philips SR (System Ready) socket makes it future-ready and you can pair this luminary with lighting control and software applications such as Interact City.
Product data
General Information
| Lamp family code | LED22 [LED module 2200 lm] |
|---|---|
| Light source replaceable | Yes |
| Number of gear units | 1 unit |
| Driver included | Yes |
| Remarks | * At extreme ambient temperatures the luminary might automatically |
dim down to protect components
Light source engine type| LED
Service tag| Yes
Product family code| BGP291 [Streetwise gen2 Micro]
Lighting Technology| LED
Value ladder| Specialisation
Serviceability class| Class A, luminary is equipped with serviceable parts
(when applicable): LED board, driver, control units, surge protection device,
optics, front cover and mechanical parts
Light Technical
| Upward light output ratio | 0 |
|---|---|
| Upward light output ratio | 1,848 lm |
| Luminous Flux | 0° |
| Standard tilt angle postop | 0° |
| Luminous Efficacy (rated) (Nom) | 113 lm/W |
| Correlated Col or Temperature (Nom) | 3000 K |
| Color rendering index (CRI) | 80 |
| Light source colour | 830 warm white |
| Optical cover type | Flat glass |
| Luminary light beam spread | 157° – 33° x 55° |
| Optic type outdoor | Distribution medium 10 |
Operating and Electrical
| Input Voltage | 220 to 240 V |
|---|---|
| Line Frequency | 50 to 60 Hz |
| Initial CLO power consumption | 17.8 W |
| Average CLO power consumption | 18 W |
| End CLO power consumption | 18.2 W |
| Inrush current | 15 A |
| Inrush time | 0.295 ms |
| Power Factor (Fraction) | 0.99 |
| Connection | 2 Push-in connector 5-pole |
| Cable | – |
| Number of products on MCB of 16 A type B | 23 |
Temperature
Ambient temperature range| -40 to +50 °C
Controls and Dimming
Dimmable| No
Driver/power unit/transformer| Power supply unit regulating with constant
light output
Control interface| –
Constant light output| Yes
Mechanical and Housing
Housing Material| Aluminum die cast
Reflector material| Polycarbonate
Optic material| Poly methyl methacrylate
Optical cover material| Glass
Fixation material| Aluminum
Housing Color| Gray
Mounting device| Post-top for diameter 48 mm
Optical cover shape| Flat
Optical cover finish| Clear
Overall length| 520 mm
Overall width| 234 mm
Overall height| 195 mm
Effective projected area| 0.0235 m²
Dimensions (Height x Width x Depth)| 195 x 234 x 520 mm
Approval and Application
Ingress protection code| IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code| IK08 [5 J vandal-protected]
Surge Protection (Common/Differential)| Luminaire surge protection level until
6 kV differential mode and 8 kV common mode
Sustainability rating| Lighting for circularity
Protection class IEC| Safety class II
CE mark| Yes
Warranty period| 5 years
Flammability mark| For mounting on normally flammable surfaces
ENEC mark| ENEC plus mark
EU RoHS compliant| Yes
Initial Performance (IEC Compliant)
Luminous flux tolerance| +/-7%
Initial chromatically| (0.43, 0.40) SDCM <5
Power consumption tolerance| +/-10%
Init. Color Rendering Index Tolerance| +/-2
Application Conditions
Performance ambient temperature Tq| 25 °C
Maximum dim level| 0% (digital)
Product Data
Order product name| BGP291 LED22-4S/830 II DM10 MSP CLO SRTH
Full product name| BGP291 LED22-4S/830 II DM10 MSP CLO SRTH
Full product code| 871951410180700
Order code| 910925866917
Material Nr. (12NC)| 910925866917
Net Weight (Piece)| 5.115 kg
EAN/UPC – Product/Case| 8719514101807
Numerator – Packs per outer box| 1
EAN/UPC – Case| 8719514101807
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any
representation or warranty as to the accuracy or completeness of the
information included herein and shall not be liable for any action in reliance
thereon. The
information presented in this document is not intended as any commercial offer
and does not form part of any
quotation or contract, unless otherwise agreed by Signify. Philips and the
Philips Shield Emblem are registered
trademarks of Reckoning Philips N.V.
www.lighting.philips.com
2024, April 9 – data subject to change
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>