PHILIPS 7748XHP Halogen Non Reflector Owner’s Manual
- June 11, 2024
- Philips
Table of Contents
PHILIPS 7748XHP Halogen Non Reflector
Product Information
Specifications
- Product Type: Halogen non-reflector
- Model: 7748XHP EHJ-S 250W G6.35 24V
- Cap-Base: G6.35
- Operating Position: S90 [Standing +/-90D or Base Down (BDH)]
- Life to 50% Failures: 50 hours
- Correlated Color Temperature: 3550 K
- Color Rendering Index (CRI): 100
- Power Consumption: 250 W
- Voltage: 24 V
- Bulb Material: Quartz-UV Open
Product Usage Instructions
Installation
- Ensure the power source is turned off before installing the halogen bulb.
- Identify the G6.35 cap base of the bulb and match it to the corresponding socket.
- Gently insert the bulb into the socket, making sure it is securely in place.
- Turn on the power to test the bulb.
Maintenance
Regularly check the bulb for any signs of damage or discolouration. Replace
the bulb if it shows any abnormalities to ensure optimal performance.
Safety Precautions
- Avoid touching the bulb with bare hands as oil residue can affect performance. If touched, clean the bulb surface with alcohol and a soft cloth.
- Do not operate the bulb in a confined space with poor ventilation to prevent overheating.
- Dispose of used bulbs properly according to local regulations.
FAQ
-
Q: How long is the lifespan of the halogen bulb?
A: The halogen bulb has a lifespan of approximately 50 hours before reaching 50% failures. -
Q: Can the halogen bulb be operated at different voltages?
A: The recommended operating voltage for the halogen bulb is 24V. Operating it at higher or lower voltages may affect performance and lifespan. -
Q: What should I do if the halogen bulb does not light up after installation?
A: Check the power source, ensure proper installation of the bulb, and replace it with a new one if needed. If the issue persists, consult a professional technician for further assistance.
PRODUCT INSTRUCTION
7748XHP EHJ-S 250W G6.35 24V
Halogen non-reflector lamps offer high-quality light and are easy to install,
replace and operate. All halogen non-reflector lamps incorporate a distortion-
free quartz bulb and a precise positioning of the mounted filament. These
ensure optimal beam performance and consistent, high light output. A wide
range of wattages is available for a broad variety of applications, including
projection systems. In addition you get all the proven advantages of halogen
technology such as a full spectrum and a color rendering index (CRI) of 100 –
the same as natural light and the best that it can be. Halogen lamps also
create a comfortable warm white light, and they maintain their lumen output,
with almost no reduction, throughout their lifetime.
Product data
General Information|
---|---
Cap-Base| G6.35
Operating Position| S90 [Standing +/-90D or Base Down (BDH)]
Life to 50% Failures (Nom)| 50 hour(s)
|
Light Technical|
Correlated Color Temperature (Nom)| 3550 K
Color rendering index (CRI)| 100
|
Operating and Electrical|
Power Consumption| 250 W
Voltage (Nom)| 24 V
|
Mechanical and Housing|
Bulb Material| Quartz-UV Open
Product Data|
---|---
Order product name| 7748XHP EHJ-S 250W G6.35 24V
Full product name| 7748XHP EHJ-S 250W G6.35 24V
Full product code| 871150041029050
Order code| 924006520503
Material Nr. (12NC)| 924006520503
Numerator – Quantity Per Pack| 1
Net Weight (Piece)| 0.004 kg
EAN/UPC – Product/Case| 8711500410290
Numerator – Packs per outer box| 100
EAN/UPC – Case| 8711500423153
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
www.lighting.philips.com
2024, April 12 – data subject to change