PHILIPS 14623 Halogen Non Reflector Owner’s Manual
- June 10, 2024
- Philips
Table of Contents
PHILIPS 14623 Halogen Non Reflector
Specifications
- Product Type: Halogen non-reflector
- Model: 14623 95W G6.35 17V 1CT/10X10F
- Power Consumption: 95W
- Voltage: 17V
- Cap-Base: G6.35 S90
- Operating Position: Standing +/-90D or BaseDown (BDH)
- Life to 50% Failures: 2,000 hours
- Bulb Material: Quartz-UV Open
- Color Rendering Index (CRI): Not specified
Product Usage Instructions
Installation
- Ensure the power source is switched off before installing the halogen bulb.
- Insert the G6.35 base of the bulb into the corresponding socket.
- Make sure the bulb is securely in place before turning on the power.
Replacement
- When replacing the halogen bulb, allow it to cool down completely if it was previously in use.
- Remove the old bulb by gently pulling it out of the socket.
- Insert the new halogen bulb following the installation instructions.
Halogen non-reflector
14623 95W G6.35 17V 1CT/10X10F
Halogen non-reflector lamps offer high-quality light and are easy to install, replace and operate. All halogen non-reflector lamps incorporate a distortion- free quartz bulb and a precise positioning of the mounted filament. These ensure optimal beam performance and consistent, high light output. A wide range of wattages is available for a broad variety of applications, including projection systems. In addition you get all the proven advantages of halogen technology such as a full spectrum and a color rendering index (CRI) of 100 – the same as natural light and the best that it can be. Halogen lamps also create a comfortable warm white light, and they maintain their lumen output, with almost no reduction, throughout their lifetime
Product data|
---|---
General Information| | | Product Data|
Cap-Base| G6.35| | Order product name| 14623 95W G6.35 17V
1CT/10X10F
Operating Position| S90 [Standing +/-90D or Base Down (BDH)]| |
Full product name| 14623 95W G6.35 17V 1CT/10X10F
Life to 50% Failures (Nom)| 2,000 hour(s)| | Full product
code| 871150042667350
| | | Order code| 924049819103
Light Technical| | | Material Nr. (12NC)| 924049819103
Color rendering index (CRI)| –| | Net Weight
(Piece)| 0.004 kg
| | | EAN/UPC – Product/Case| 8711500426673
Operating and Electrical| | | Numerator – Packs per
outer box| 100
Power Consumption| 95 W| | EAN/UPC – Case| 8711500426697
Voltage (Nom)| 17 V| | |
| | | |
Mechanical and Housing| | | |
Bulb Material| Quartz-UV Open| | |
Halogen non-reflector
Dimensional drawing
© 2024 Signify Holding All rights reserved. Signify does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any commercial offer and does not form part of any quotation or contract, unless otherwise agreed by Signify. Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.www.lighting.philips.com 2024, May 17 – data subject to change
Frequently Asked Questions (FAQ)
Q: What is the average lifespan of the halogen bulb?
A: The halogen bulb has a lifespan of approximately 2,000 hoursbefore reaching 50% failures.
Q: Can this bulb be used in any orientation?
A: The recommended operating positions for this bulb are standing at +/-90 degrees or base down (BDH).
Q: What is the power consumption of this halogen bulb?
A: The bulb consumes 95 watts of power at a voltage of 17volts.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>