SKROSS RELOAD 20 PD 100 W Power Bank Instruction Manual

SKROSS RELOAD 20 PD 100 W Power Bank

Product Information

Specifications

• USB Type-C (In/Out) Output: 5 V / 3 A; 9 V / 3 A; 12 V / 3 A; 15 V / 3 A; 20 V / 5.0 A (Max. 100 W)
• USB Type-C (Out) Output: 5 V / 3 A; 9 V / 2.22 A; 12 V / 1.66 A (Max. 20 W)
• LED charge level display
• Power Button
• USB-C to USB-C charging cable, length 30 cm

Product Usage Instructions

1. Charging the Device: Connect the USB-C to USB-C charging cable to the device and a power source.
2. Checking Charge Level: Press the activation button (E) to check the charge level. The LED charge level display will show the remaining battery percentage.
3. Sleep Mode: The device will automatically enter sleep mode after 15 seconds of inactivity to conserve power.
4. Battery Maintenance: Avoid leaving the device uncharged for an extended period as it may reduce performance and damage the battery.

Frequently Asked Questions (FAQ)

• Q: How do I know if Power Delivery or QC 3.0 is detected on my device?
  A: The green LED indicator light will activate if Power Deliver  or QC 3.0 is detected on your device.

• Q: What are the output specifications for USB Type-C?
  A: The USB Type-C (In/Out) Output ranges from 5 V / 3 A to 20 V / 5.0 A with a maximum power delivery of 100 W.

• Q: How long is the USB-C to USB-C charging cable?
  A: The USB-C to USB-C charging cable included with the device is 30 cm in length.

RELOAD 20 PD 100 W
skross.com

1.  RELOAD 20 PD 100 W
2. LED INDICATOR

Product Overview & Functions

1. SKROSS® RELOAD 20 PD 100 W
   20 000 mAh battery with Power Delivery (PD) function for laptop and USB devices

   • A 1 x USB Type-A Output: 5 V – 6 V / 3 A; 6 V – 9 V / 2 A; 9 V – 12 V / 1.5A

   • (Max. 18 W)

   • B USB Type-C (In/Out) Input: 5 V – 20 V DC (Max. 45 W)

   • USB Type-C (In/Out) Output: 5 V / 3 A; 9 V / 3 A; / 12 V / 3 A; 15 V / 3 A; 20 V / 5.0 A (Max. 100 W)

   • C USB Type-C (Out) Output: 5 V / 3 A; 9 V / 2.22 A; / 12 V / 1.66 A (Max. 20 W) D LED charge level display

   • E Power Button

   • F USB-C to USB-C charging cable, length 30 cm
     The RELOAD 20 PD 100 W is your ideal companion when you need an energy boost on the go. It is pre-charged and ready for use right away. The Power Delivery function (PD) charges USB type

   • C devices and laptops in no time.

2. Charge Level Display
   Press activation button (E) to check the charge level of the RELOAD 20 PD 100 W. Sleep mode activates automatically after 15 seconds.

   • LEDs 1, 2, 3 and 4 light up: Charge level 100 % – 75 %
   • LEDs 1, 2 and 3 light up: Charge level 75 % – 50 %
   • LEDs 1 and 2 light up: Charge level 50 % – 25 %
   • LED 1 lights up: Charge level 25 % – 1 %

3. We recommend never leaving the RELOAD 20 PD 100 W for an extended period of time without charging as a fully drained battery can reduce its performance and cause damage.

Instructions for use

Charging the SKROSS® RELOAD 20 PD 100 W
Connect the RELOAD 20 PD 100 W directly to a socket using a USB charger or world adapter with USB charging function. To do so, use the cable provided (F). While the RELOAD 20 PD 100 W is charging, all four LED lamps will flash in sequence. As soon as the charging process is complete, all four LED lamps will light up at the same time.
Charging USB devices using the SKROSS® RELOAD 20 PD 100 W
Connect the devices you want to charge to the RELOAD 20 PD 100 W. The RELOAD 20 PD 100 W can be used to charge up to three devices at the same time. USB type C devices with Power Delivery function (PD) can be charged ultra-fast via the USB type C output (B & C). The USB type A output (A) also provides a fast- charging function.

Safety Precautions

• The RELOAD 20 PD 100 W must not come into contact with liquids or be exposed to moisture.
• The RELOAD 20 PD 100 W must not be exposed to temperatures over 60°C. Storing the device close to heat sources, such as ovens and fires, or in a car may lead to damage. Extreme cold can also lead to reduced performance. Ideally, the device should be stored at room temperature.
• Keep the RELOAD 20 PD 100 W out of the reach of children.
• Improper use of the RELOAD 20 PD 100 W will automatically invalidate the guaran-tee.
• Improper handling of the RELOAD 20 PD 100 W can lead to fires, explosions or chemical leaks.
• Do not attempt to open the casing of the RELOAD 20 PD 100 W. This will automatically invalidate the warranty.
• Do not use the RELOAD 20 PD 100 W if the casing is damaged or gives off a strange smell.
• When not in use, the RELOAD 20 PD 100 W should be fully charged once every three months.
• Clean the RELOAD 20 PD 100 W as required using a dry cloth; do not use abrasive cleaning products.

Warranty & limitation of liability

• This product has been developed in line with international safety standards. The user must exercise due care and attention when using the product. The warranty expires 24 months after the date of purchase and is limited exclusively to the replacement of a defective product. Aside from its commitment to replace a defective product within the warranty period, WorldConnect AG accepts no liability, under any circumstances, for direct, indirect or consequential damages resulting from (i) a defective product; (ii) force majeure events; (iii) any improper use of the product that deviates from its intended use (iv) any use of the product that contravenes the instructions contained in the manual. Liability is also excluded for any lost profits, operational downtimes, data loss or any other losses and/or damages incurred during the proper or improper use of the product. Subject to change. ©2023 WorldConnect AG. All rights reserved.

Specifications

RELOAD 20 PD 100 W

• Capacity: 20 000 mAh / 74.0 Wh
• 3.7 V Lithium Battery
• 1 x USB Type-C (In/Out) Input: 5.0 – 20.0 V DC, Max. 45.0 W
• 1 x USB Type-C1 (In/Out) Output: 5.0 V DC / 3.0 A, 9.0 V DC / 3.0 A, 12.0 V DC / 3.0 A, 15.0 V DC / 3.0 A, 20.0 V DC / 5.0 A, Max. 100.0 W
• 1 x USB Type-C2 (Out) Output: 5.0 V DC / 3.0 A, 9.0 V DC / 2.22 A, 12.0 V DC / 1.66 A, Max. 20.0 W
• 1 x USB Type-A (Out) Output: 5.0 – 6.0 V DC / 3.0 A, 6.0 – 9.0 V DC / 2.0 A, 9.0 –12.0 V DC / 1.5 A, Max. 18.0 W
• USB Output Type-C1 + Type-C2 + Type-A: Max. 65.0 W
• Total Output: Max. 100.0 W
• 30 cm USB-C to USB-C cable included

Warranty & Limitation of Liability

• This product has been designed and manufactured to meet international safety standards. Users must handle the product with due care and diligence. Product warranty is 24 months as of date of purchase strictly limited to replacement of deficient product. Other than for replacement of a deficient product during the warranty period, WorldConnect AG shall under no circumstances be liable for any direct, indirect and/or consequential loss and damage caused by (i) a deficient product; (ii) force majeure events; (iii) misuse of the product beyond its intended purpose (iv) usage contrary to the instructions set out in the product manual. Any liability is excluded for loss of profits, interruption of business, loss of data as well as any other loss and/or damages whether caused during proper operation or misuse of the product.

WEEE

https://www.skross.com/en/about-skross/help-center/weee-directive

• WorldConnect AG, Viscosestrasse 46, 9443 Widnau, Switzerland WorldConnect AG c/o DACHSER SE, Pinkertweg 40, 22113 Hamburg, Germany ?
• support@skross.com
• www.skross.com

References

• Homepage - Skross
• Homepage - Skross
• SKROSS® - Skross

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>