SKROSS PRO Light USB (2xA) Universal Adapter Instructions

SKROSS PRO Light USB (2xA) Universal Adapter

Functions Description

World adapter PRO Light USB, 3-pole

PRO Light USB (2xA):

• max. 6.3 A, 100 V/630 W–250 V/1575 W
• 2 x USB-A port: 5 V/max. 2.4 A (shared)

PRO Light USB (4xA):

• max. 7 A, 100 V/700 W–250 V/1750 W
• 4 x USB-A port: 5 V/max. 4.8 A (shared)

PRO Light USB (AC):

• max. 7 A, 100 V/700 W–250 V/1750 W
• 1 x USB-C port: 5 V/max. 3 A (max. 15 W)
• 1 x USB-A port: 5 V/max. 2.4 A

Country adapter World to Europe, 3 pole

max. 16 A/100 V–250 V

only included with PRO Light USB – World versions:

• PRO Light USB (2xA) – World
• PRO Light USB (4xA) – World
• PRO Light USB (AC) – World

Fuse replacement

Slow blow microfuse (glass or ceramic): T 7 A, 250 V AC,
6.3 x 25.4 mm; replacement only possible with following world adapters:

• 1.2 PRO Light USB (4xA)
• 1.3 PRO Light USB (AC)

Plug types: A USA/Japan, B USA, C Euro, E French Schuko, F Schuko, G UK, I Australia/China, J Switzerland, L Italy, N Brazil

Safety instructions

• Keep the adapter out of the reach of children.
• The adapter is only intended for short-term use. Disconnect from the mains/device after use.
• Never use the adapter if the casing is damaged.
• Never expose the adapter to liquids or moisture.
• The adapter is not suitable for use in enclosed spaces (IP20).
• The adapter is not a voltage converter. The input voltage for the device to be connected must match the voltage of the local mains power supply.
• The fuse will blow if the adapter is used with higher-powered devices than specified (W = A x V).
• When replacing the fuse (not possible for all adapters), always use an appropriate fuse.
• The adapter cannot be used to charge electric vehicles.
• The adapter must only be used to connect a single device (not including USB connections).
• The adapter must not be used with multiplug sockets or other adapter plugs.
• Improper use of the adapter will invalidate the manufacturer’s warranty.
• Retain a copy of this document and the manual.

Warranty & limitation of liability

This product has been developed in line with international safety standards. The user must exercise due care and attention when using the product. The warranty expires 24 months after the date of purchase and is limited exclusively to the replacement of a defective product. Aside from its commitment to replace a defective product within the warranty period, WorldConnect AG accepts no liability, under any circumstances, for direct, indirect or consequential damages resulting from (i) a defective product; (ii) force majeure events; (iii) any improper use of the product that deviates from its intended use (iv) any use of the product that contravenes the instructions contained in the manual. Liability is also excluded for any lost profits, operational downtimes, data loss or any other losses and/or damages incurred during the proper or improper use of the product.
Subject to change.
©2020 WorldConnect AG. All rights reserved.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>