SKROSS PA40 PRO Adapter User Guide
- June 6, 2024
- SKROSS
Table of Contents
SKROSS PA40 PRO Adapter
PRODUCT OVERVIEW & FUNCTIONS
I World Adapter PRO
FOR TRAVELLERS FROM: Europe (Schuko and 2-pole European plug)
IN: over 120 countries
II Country Adapter World to Europe
(PRO World version only) FOR TRAVELLERS FROM: over 220 countries worldwide
IN: Europe (Schuko)
III Country Adapter World to Europe USB
(PRO World & USB version only) FOR TRAVELLERS FROM: over 220 countries
worldwide
IN: Europe (Schuko)
INCLUDES: built-in USB port
A Release button
B Country sliders/country-specific plugs
-
USA
-
UK
-
Australia, China
-
Italy, Switzerland, Brazil
-
Europe (Schuko):
PRO World and
PRO World & USB versions only
C Compatibility input (PRO) -
Europe (Schuko)
-
Euro (over 120 countries worldwide)
D Compatibility input (World to Europe & World to Europe USB) -
Australia, China
-
USA, Japan
-
UK
-
Switzerland
-
Italy
-
Brazil
E USB port (World to Europe USB)
The PRO series is suitable for most 2-pole and 3-pole (earthed) sockets in protection classes I and II and is the safest way to connect your portable devices around the world (3-pole sockets).
The attachment on the PRO World & USB version also features a high- performance USB port (E).
Suitable for the following devices, among others (F) : laptops,
hairdryers, smartphones, tablets, digital cameras, MP3 players, electric
razors, games consoles, GPS devices, video cameras, etc.
Adapter: maximum 6.3 A; 100 V / 630 W to 250 V / 1575 W
USB port: 5 V / 2.4 A
INSTRUCTIONS
Press the release button (A) and push the required slider forwards until it clicks into place. Connect the mains plug or charger to the adapter (G). Connect the adapter to the mains (H) (image: PRO World).
Configuring the plug for use in Switzerland, Italy or Brazil (I)
Push the slider (4) forwards until it clicks into place. You can now
position the middle pin:
11 Switzerland: push the middle pin all the way forwards.
12 Italy: line all three pins up in a row.
13 Brazil: push the middle pin forwards until it clicks once. “Schuko”
standard Using the PRO World / PRO World & USB adapter with a device with
a Schuko plug: remove the World to Europe/World to Europe USB attachment,
connect the plug on your chosen device to the adapter (C) and connect the
adapter to the mains.
To connect devices from all over the world to Schuko Europe, connect the World to Europe/World to Europe USB attachment directly to the socket (J). (Image: World to Europe)
USB FUNCTION
(PRO World & USB version only)
Connect the World to Europe USB attachment to the PRO adapter. Connect the
device-specific USB charger cable to the USB port (K) and connect the
adapter to the mains (L).
The World to Europe USB attachment can also be used without the PRO adapter in any country with the Schuko plug standard (over 100 countries worldwide).
ACCESSORIES
The Country Adapter World to Europe / World to Europe USB and matching USB charger are also available separately.
SAFETY PRECAUTIONS
- Keep the adapter out of the reach of children.
- The adapter is not a voltage converter.
- The input voltage for the device to be connected must match the voltage of the local mains power supply.
- The adapter is only intended for short-term use and should be disconnected from the mains after use.
- Never use the adapter if the casing is damaged.
- Never expose the adapter to liquids or moisture.
- Using the adapter with higher-powered devices which exceed this product’s specifications (W = A × V) will cause the fuse to blow.
- When replacing the fuse, only use a 6.3 A fuse (ceramic or glass)
- Improper use of the adapter will invalidate the manufacturer’s warranty. No liability is accepted for damages.
- Keep these instructions.
CUSTOMER SERVICE
If you have any problems using the PRO series of SKROSS® World Adapters, please contact us on support@skross.com.
WARRANTY TERMS
Two-year warranty. The full warranty terms can be found at www.skross.com.
All products and software mentioned in this document are registered brands belonging to the relevant brand owner. Subject to errors.
© 2018 WorldConnect AG. All rights reserved. SKROSS® is a registered trademark of WorldConnect AG. All trademarks and registered trademarks are the property of their respective owners. Subject to changes in technical specifications.
Exclusion of Liability
This product has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken for safety to be assured. WorldConnect AG shall under no circumstances be liable for any loss and/or damage caused by: fire; earthquake; accidental damage; intentional misuse of the product; use of the product in improper conditions; loss and/or damage caused to the product whilst in the possession of a third party; any damage or loss caused as a result ot the owner’s failure and/or neglect to follow the instructions set out in the owner’s manual; any loss or damage caused directly as a result of misuse or malfunction of the product when used simultaneously with associated equipment.
Furthermore, under no circumstances shall WorldConnect AG be liable for any consequential loss and/or damage including but not limited to the following: loss of profit, interruption of business, the loss of recorded data whether caused during normal operation or misuse of the product.
The information in the operation manual can be changed without prior notice. The manufacturer offers no promise or guarantee, either implicit or explicit, as to the accuracy or completeness of the operation manual.
How to change the fuse?
WorldConnect AG, Werkstrasse 12a, 9444 Diepoldsau, Switzerland
WorldConnect AG, Bundesstrasse 110, 6923 Lauterach, Austria
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>