MARMITEK Sense MI Zigbee Door Alarm Sensor User Manual

: June 8, 2024
: MARMITEK

Table of Contents

MARMITEK Sense MI Zigbee Door Alarm Sensor
Package content
Installation
Technical specifications
QR CODE
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

MARMITEK Sense MI Zigbee Door Alarm Sensor

Package content

door alarm sensor
CR1632 battery 2x
3M adhesive tape
quick guide

SAFETY INSTRUCTION

Please read these instructions thoroughly before you use the device and keep them for future reference.

Only for indoor use.

Do not expose the product to extremely high or low temperatures, strong light sources or direct sunlight.
This product is not a toy. Keep out of reach of children.
Dispose of batteries as chemical waste. Remove the batteries when you are not using the system for a longer period of time.
Check the polarity (+/-) of the batteries when inserting them in the product. Wrong positioning can cause an explosion.
Repairs or service should only be performed by qualified personnel.

Requirements

This product requires a Smart me Zigbee Gateway (sold separately) that is connected to the Internet.

Installation

Installation of the Smart me app

Download and install the Marmitek Smart me app from the Apple app store or the Google Play store. Launch the Smart me app after installation is completed. Follow the instructions and register for a new account.

Installation of the Sense MI

Open the housing of the Sense MI by sliding it in the direction indicated and pull the plastic battery strip to activate the battery.
The indicator light should start flashing rapidly. If the light is not flashing, press the reset button for 5 seconds until it starts flashing.
Launch the Smart me app from your smart phone or tablet.
Select the Smart me Zigbee Gateway.
Click on the + (at the bottom of the screen) to add a new product, confirm that the indicator light is flashing quickly and follow the instructions.
Press Help button during installation for more information or when installation fails

Notes for using the product

After the installation is completed you can configure the Sense MI by using the app.
Check our website www.marmitek.com
for more details and how to use the Smart me products.

Technical specifications

Type Open/close
Battery life 10.000 triggers -1year @ 30 per day -2 years @ 15 per day
Wireless technology Zigbee 3.0
Operating range up to 30 meters
Power Battery CR1632 2x
Standby current <5 uA
Magnetic control distance >20mm
Use indoor use only
Dimensions (h x w x d) 54 x 22 x 13 mm 33 x 10 x 13 mm

Declaration of Conformity
Hereby, Marmitek BV, declares that the Sense MI is in compliance with the essential requirements of the 2014/53/EU Directives. Full Declaration of Conformity is available at www.marmitek.com/en/declarations-of-conformity/ More detailed user guide and instructions are available on our website at www.marmitek.com