EE-LD-SFL-5W Solar LED Flood Light User Manual

EE-LD-SFL-5W Solar LED Flood Light

Features & Advantages

• Global patent design, light panel is flexibly folded, slim as a PAD.
• Solar panel and light panel are integrated flexible, new leading in the whole industry!
• Bracket 360°adjustable, light panel 135°adjustable, fully realize your perspective of different lighting requirement.
• One sensor inductive, wider detection angle, higher sensitivity.
• Adopt optical Lens optimize light, not only make the light more brighter and also Anti-UV.
• Two working modes for different application in different seasons.
• High quality mono-crystalline silicon solar panel, high conversion solar photo electricity, high energy tans-action rate.
• High performance lithium battery 3000mAh, bigger capacity brings longer lifespan.

Product Image

Dimension(mm)

Specifications

Replaceable
Charging Time| 6Hrs/Day| Working Time| 2 different working modes
LED Type| SMD 2835*30pcs| PIR sensor Range| Detection        angle: 120° Detection area: ≤6M
Surface Color| Black| Beam angle| 90°
IP Class| IP65| Working Temp| -15C°- 50C°
Housing Material| ABS+PC| Warranty| 24                                months
(battery warranty 12 months)

Two Working Modes

Please press the button to adjust to the demanded working mode.

Sensor Mode
When battery capacity above >30% Automatically turns on to full brightness when motion is detected in the range ≤6mtrs, then dim to weak brightness in 20 seconds of no motion. When battery capacity below <30% Automatically turns on to full brightness when motion is detected in the range ≤6mtrs, then turns off in 20 seconds of no motion.

Constant Lighting Mode Press the button for 3 seconds and shining one time, lamp turns to constant lighting mode, both motion and light sensors disabled. Permanently keep lighting
until the battery capacity reduces to zero switching back to Sensor Mode.

Applications

All the area inconvenient in electricity but full of sunshine, such as gardens, billboard, buildings, parking lot, entrance, courtyard, road, street, hotel etc.

Installations

1. Prepare lamp, accessories and tools well firstly.
2. Use Allen wrench to loosen the light panel and adjust it to the demanded lighting angle(see picture①), then fix the screw tightly(see picture ②).
3. Rotating the screw to loosen the bracket (see picture ③) , adjust it to the appropriate angle and then fix the screw tightly(see picture ④).

Installation A: Wall mounted
Please use the measure card to drill 2 holes of Φ8mm with a spacing of 132.5mm, then fix the lamp onto the wall with expansion plugs and screws.

• The recommended mounting height is 2-4Mtrs.

Installation B: Put on flat surface directly
Push aside the stand bracket and put it on a flat surface.

Installation C: Hanging on the wall

1. Please drill 2 holes of Φ8mm on the wall with a spacing of 88.5mm. (see picture ①)

2. Fix the expansion plugs and screws into the holes with a spare space(do not lock the bottom).
   (See picture ②)

3. Push aside the stand bracket, align the hanging holes to the screws and hang the lamp on the wall.(see picture ③)

* The recommended hanging height is less than 2Mtrs.

Remark

1. This is a solar powered lamp, please install it in a location where can get enough sunshine.

2. Please note the lighting time depends on sunshine duration & weather.

3. The lamp will light up automatically at dusk in Sensor Mode.

4. Built-in intelligent IC is with over-charge, over-discharge and over-voltage protection.

5. The lamp is equipped with an internal battery pack, which is replaceable.
   If any need, please contact seller for correct new battery pack.

6. If the battery is taken out and put back in or replaced with new ones, please toward the solar panel to sunshine or a strong light to activate the lamp.

7. Non-professionals please do not disassemble the lamp.

8. Please do not dispose the battery with household garbage to avoid explosion.

References

• Welcome to Eleding

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>