PHILIPS BRP 370 Street Lighting Luminaire Instruction Manual
- June 8, 2024
- Philips
Table of Contents
PHILIPS BRP 370 Street Lighting Luminaire Instruction Manual
Product Overview
- Type: BRP 370
- Lamp: LED
- Voltage: 240 V, 50 Hz
- IP Classification: IP 66
- Net Weight: 8.8 kgs
- Max. Projected Area: 0.233 m²
- Application: Outdoor use only
Dimensions
Installation
-
Mounting Position: Horizontal
-
Application height: 8-14m
-
Suitable Cable Diameter: 8-12mm
-
Pole Size: 48-60mm diameter
-
Take the product out of the packing box.
-
Open the rear cover by screw driver as shown.
-
Open the rear cover as shown.
-
Allow the incoming cable to pass through the Spigot area into the gland. Then, tighten gland cap with spanner.
-
Fix the street light over the pole and tighten the bolts.
Tightening Torque: 8Nm
-
Cut the wire as per the size and fix it in cable grip
-
Make the electrical connections as per the LN marking
-
Fix the rear cover using the screw driver as shown
-
Remove the polythene over front diffuser.
-
Luminaire is ready for use.
-
CAUTION:Do not open front cove.
-
CAUTION: Broken Glass/ ! front diffusers should be immediately replaced.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>