Cyber Acoustics CA-3602FFP 2.1 Speaker Sound System Owner’s Guide
- June 8, 2024
- Cyber Acoustics
Table of Contents
Cyber Acoustics CA-3602FFP 2.1 Speaker Sound System
SPECIFICATIONS
- BRAND Cyber Acoustics
- SERIES CA-3602
- SPEAKER TYPE Subwoofer
- CONNECTIVITY TECHNOLOGY Auxiliary
- SPECIAL FEATURE Bass Boost
- ITEM WEIGHT 8.63 pounds
- PRODUCT DIMENSIONS 12 x 11.5 x 9.5 inches
- POWER SOURCE Corded Electric
DESCRIPTION
This subwoofer speaker system produces 62 watts peak power and 30 watts RMS
and is powered by an acoustically optimized internal power supply. With this
much power, you can expect incredible sound at any volume level, capable of
filling any large room in your home or office. The mounting method is a wall
mount. The handy control pod gives you complete control over your sound
system. Adjust the volume, turn it on and off, or plug in your headphones for
private listening. You can quickly connect your cell phone, tablet, MP3
player, or gaming system to the 3.5mm aux input to really amp up the sound.
Furthermore, the bass volume control allows you to fine-tune the richness of
the sound to your liking.
The ported 5.25″ subwoofer provides some of the deepest bass available, making
it ideal for any audio experience, while the satellites with twin 2″ drivers
provide crisp, clean, optimized sound. The piano black finish on the
satellites was designed to look great next to today’s flat panel monitors. The
power cable is 5 feet long, the speaker to speaker cable is 11 feet long, the
speaker-to-subwoofer cable is 6 feet long, the input cable is 6 feet from the
control pod, and the control pod cable is 6 feet long.
WARNING
To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture.
CAUTION
Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure.
IMPORTANT SAFETY INSTRUCTIONS
- Read Instructions – All the safety and operating instruction should be read before the product is operated.
- Retain Instructions – The safety and operating instruction should be retained for future reference.
- Heed Warnings – All warnings on the product and in the operating instructions should be adhered to.
- Follow instructions – All operating and use instructions should be followed.
- Cleaning – Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a dry cloth for cleaning.
- Attachments – Do not use attachments not recommended by the product manufacturer as they may cause hazards.
- Water and Moisture – Do not use this product near water – for example, near a bathtub, wash bowl, kitchen sink, or laundry tub; in a wet basement, or near a swimming pool, and the like.
- Accessories – Do not place this product on an unstable cart, stand tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the product should follow the manufacturer. instructions, and should use a mounting accessory recommended by the manufacturer. A product and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn.
- Ventilation – Slots and openings in the cabinet are provided for ventilation and to ensure the reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surfaces. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to.
- Power Sources – This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instruction.
- Grounding or Polarization – This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fails to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug.
- Power-Cord Protection – Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and points where they exit from the product.
- Protective Attachment Plug – The product is equipped with an attachment plug having overload protection. This is a safety feature. See Instruction Manual for replacement or resetting of protective device. If replacement of the plug is required, be sure the service technician has used a replacement plug specified by the manufacturer that has the same overload protection as the original plug.
- Lightning – For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges.
- Power Lines – An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
- Overloading – Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
- Object and Liquid Entry – Never push objects of any kind into this product through openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
- Servicing – Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
- Damage Requiring Service – Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions:
- When the power-supply cord or plug is damaged,
- If liquid has been spilled, or objects have fallen into the product,
- If the product has been exposed to rain or water,
- If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation.
- If the product has been dropped or damaged in any way, and
- When the product exhibits a distinct change in performance – this indicates a need for service.
- Replacement Parts – When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
- Safety Check – Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition.
- Wall or Ceiling Mounting – The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
- Heat – The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
INTRODUCTION
This speaker system is designed to deliver superior audio performance to computers, smartphones, iPod®, MP3 players, DVD players, and other portable audio devices. The system offers highly efficient, long excursion drivers combined with a low-distortion, high-powered amplifier that provides deep bass with clarity and a greater dynamic audio range.
BOX CONTENTS
- 2 x satellite speakers
- Subwoofer
- Control pod
- Owner’s guide with connection diagram
CAUTION
- Do not plug the power supply in until all connections are made.
- Use only the AC power cable supplied with these speakers.
- Keep speakers away from sources of extreme heat, such as stereo amplifiers, space heaters, stoves, and heat vents.
- Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as furniture wax, bleach, benzene, acetone, or ammonia.
SPEAKER PREPARATION
- Subwoofer —placed on the floor near a wall or corner, for optimum performance. Adjust the distance from the corner or wall to affect the quality of bass performance as desired. Direct open port toward the wall to increase bass punch.
- Satellite Speakers —For best stereo separation, place them on opposite sides of the listening device, computer, or TV screen (as far apart as possible is usually best). For example, if you are listening to the speakers using a laptop on a desk, place the left satellite speaker on the far-left corner of the desk, and the right satellite speaker on the far-right corner of the desk.
SPEAKER CONNECTION
You can connect these speakers to a variety of devices, such as laptops, computers, smartphones, iPods, MP3 players, CD players, DVD players, and other audio devices. Please read the following instructions along with the diagrams provided to identify which diagram most closely matches your connection source.
DESKTOP COMPUTER
- Take the cable with the green plug and plug it into the green output/source jack in the back or front of the computer (also referred to as the sound/audio out jack).
- Connect the gray plug to the “To Speaker” jack on the back of the subwoofer.
- Take the AC power cord and plug it into a wall socket or power strip.
SMARTPHONE, IPOD, MP3 PLAYER, DVD PLAYER, OR CD PLAYER
- Take the cable with the green plug and plug it into the green output/source jack of the audio device.
- Connect the gray plug to the “To Speaker” jack on the back of the subwoofer.
- Take the AC power cord and plug it into a wall socket or power strip.
GAMING SYSTEM
- In order to connect these speakers to a game console, you will need a console gaming adapter, also known as a “Y adapter”, which has dual RCA outputs and is sold separately.
- Turn off the power to your gaming system.
- Take the red and white dual-RCA connections on the Y adapter, and plug them into the matching red and white RCA jacks on your gaming system.
- Take the green stereo jack at the other end of the Y adapter, and plug that into the control pod cable with the green plug.
- Connect the gray plug to the “To Speaker” jack on the back of the subwoofer.
CONTROLS AND FEATURES
- Power —the on/off button is on the side of the control pod. Slide to turn the speaker on or off.
- Master Volume Control —this volume is on the top of the control pod and is indicated by the words “MAX” and “MIN.” Rotate clockwise to turn the volume up, and counter-clockwise to turn the volume down.
- Bass Volume Control – the bass volume is located on the side of the control pod. Turn the knob to the right to increase bass, and turn the knob to the left to decrease.
- Headphone Output Jack —connect your headphones to this jack and they will mute the speaker system automatically. The master volume can then be used to turn the volume up or down on your headphones.
- Auxiliary Input Connection —the auxiliary input jack allows the connection of a second audio source. For example, if your speakers are connected to your computer, you would still be able to plug in an iPod or smartphone using the 3.5mm input jack on the side of the control pod. The connected iPod or smartphone would override your computer’s audio source connection while it’s plugged in.
TROUBLESHOOTING
SYMPTOM
The speaker system will not power on.
SOLUTION
- The power button is not turned on. Slide the power button back and forth and check for the blue LED indicator light to come on.
- Verify the AC power cord is plugged into the wall outlet.
- Check if the wall outlet or power strip you are using is actually getting power, i.e. not a switched outlet.
SYMPTOM
The speaker does not produce sound.
SOLUTION
- Verify the speaker is getting power. Check the above steps.
- Make sure the volume is turned up to an audible listening level.
- Verify that all cables are plugged into the correct jacks.
- Many times users believe that the speakers are not working, when in fact they are having trouble with the sound source. The most common problem when connecting to a computer is that the connections are incorrect. Make sure you are connected to the audio output jack from your computer. Many times, this jack will be green. Also, make sure your media device or CD/DVD device is playing and the software volume settings are turned up and not muted.
- If you still have problems, disconnect the speaker source cable from your computer and connect to a smartphone, iPod, or anything else with a 3.5mm headphone output. If your speakers work on this other source, you know they are functioning as normal and the issue likely lies with your computer or the connections.
SYMPTOM
The sound is distorted.
SOLUTION:
- Turn the volume down by 25% or 50%. If this does not work, also check the audio software volume level and decrease it if necessary.
- Adjust the computer’s master volume control by balancing the volume until it’s at 50%, then adjust the volume levels on the speakers.
- Adjust the bass volume control to test for maximum and minimum output. You may also need to move the subwoofer either closer or farther away from a wall or corner to affect the sound performance.
If you have questions or need assistance with your speakers, we’re here to help. Call 360-883-0333 during the hours of 8 am to 5 pm (United States PST) or send email to support@cyberacoustics.com iPod, iPhone, iPad, and iPad mini are trademarks of Apple, Inc.
FAQs
Does this come with a warranty?****
Yes, it does.
Does this come with a remote?****
No, it doesn’t.
Is this compatible with my TV?****
Yes, it is.
This or Logitech Z313? Which is the best for the price since they are both about $40?****
We have both. I would get CyberAcoustics no question. Better sound and the bass is purer. ONE BIG DIFFERENCE Between the two… Cyber has a volume control that controls both sound level and BASS LEVEL!!! Z313 does not! With the Z313 you are stuck with the booming bass.
what cables do I need to purchase other than (already having HDMI cable) to make speakers and control unit useable?****
the entire unit already comes with its own power cable to be usable. you just need to plug it into your laptop, or mobile to use it. I ordered a 3.5 mm stereo cable but it was useless as the speaker unit already came with its own cable set.
Is there a volume knob on the subwoofer to separately control the sub?****
There is a separate volume knob for the sub-woofer on the hub with the main volume control.
Will the subwoofer work if the satellite speakers are disconnected? I’m only trying to generate bass from a sine wave tone generator.****
It works well.
Does it work with the echo dot?****
I have never tried it, if it has a 3.5MM Jack that you can plug this into then it might work.
Will this speaker system work on a desktop PC? What do I plug it into on the computer?****
Yes, it will work with a desktop PC. You can disconnect the speaker jack from the back of your computer and plug in the Cyber Speaker System jack. You will enjoy the improved sound.
A re they mac compatible?****
Any speaker with 3.5 aux cables will work on a Mac.
Can the base of the satellite speakers be removed?****
The only adjustment for bass is for the sub with a dial to increase or decrease the bass. The satellite speakers just play what the source puts out.
Can the woofer be used with the other speakers?****
Yes, As long as the other speakers have a 3.5 mm (like headphones) jack. If they don’t you can probably find an adapter here on Amazon. That’s what I used and had success.
Do you have an updated version with Bluetooth?****
Not sure.
Video
Download PDF Link;Cyber Acoustics 2.1 Speaker Sound System
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>