Cyber Acoustics CA-2890BT Speaker Bar User Guide

Cyber Acoustics CA-2890BT Speaker Bar

In the Package

USB Type A to C Adapter

Note
The USB Type A to C Adapter is packed along with the QSG inside the box.

Using the Speaker Bar Best for Use In

Home – Office – Traveling

Getting Started  USB Connection

The Cyber Acoustics Speaker Bar can be used with a Bluetooth connection to your Smartphone or Tablet and a USB connection to your Windows 10 PC or Mac.

USB connection  Using with a PC or Mac

Insert the USB Type A end of the Speaker Cable into the USB. Type A port on your computer. You can also use the provided USB A to C adapter to connect the Speaker Bar to an available USB Type C port on your computer. The Speaker Bar will power on and connect to your PC in USB mode. Source Light will be lit solid Green. The Cyber Acoustics Speaker Bar features full plug and play support for Windows 10, OSX / MacOS and Chromebooks. After plugging the Speaker Bar into the computer, you may use for playing music, videos or as a speakerphone with applications such as Zoom, Teams, Skype, etc. If the computer does not automatically recognize the Speaker Bar when it is plugged into the USB Type A port, try plugging the USB Cable into a different USB Type A port. If this does not work, then restart the computer. This will cause the Speaker Bar to be recognized in most instances. Important: If the Speaker Bar is also connected by Bluetooth to a Smartphone, the Speaker Bar will auto switch from USB mode to Bluetooth mode when there is an incoming call on the connected Smartphone. To change back to USB mode after the call is complete, press the Multi Function button twice.

Getting Started

Bluetooth Connection  Step 1

Before you start, insert the USB Type A end of the Speaker Cable into the USB Type A port on your computer.

• Press the Multi-Function Button two times  to switch between USB mode and Bluetooth mode.
• When changed to Bluetooth mode, the Speaker Bar will be in pairing mode and the Source Light will be flashing blue or if already connected to a
• Smartphone or Table the Source Light will be solid blue.

Source Light Flashing Blue

• The Cyber Acoustics Speaker Bar is ready to pair and connect.

Source Light Solid Blue

• Your device has connected to the Cyber Acoustics Speaker Bar and is ready to use.
• The Cyber Acoustics Speaker Bar allows the last device it was connected with to automatically reconnect with the speaker each time the speaker is turned on and that device is within range.
• When connected to a Smartphone, the Speaker Bar will auto switch to Bluetooth mode from USB. mode when there is an incoming call on the connected Smartphone.

The Cyber Acoustics Speaker Bar can be connected to one device at a time

• To pair and connect to a different device, you need to first disconnect the currently paired device.
• To disconnect the current device, press and hold down the Multi-Function Button for 5 seconds.
• The Source Light will begin flashing blue and the Cyber Acoustics Speaker Bar is ready for the next device to pair and connect.
• Your device needs to be within 10 unobstructed meters of the Cyber Acoustics Speaker Bar to pair and connect.
• If there is an issue when connecting please move your device closer to the speaker, then pair and connect.

 Bluetooth Connection  Step 2

With your iPhone, iPad/Tablet, Smartphone – Go to Settings > Bluetooth, check Bluetooth is on Select ‘CA-2890 BT Speaker Bar’ when it appears under DEVICES. Your device will connect in a few seconds. The Source Light will turn solid blue .The Cyber Acoustics Speaker is ready to use.

Note
Your Smartphone or Tablet instructions may vary With your Apple Mac or Windows 10 Laptop/Computer .Use the USB Connection when using with a Windows 10 Laptop/Computer or Apple Mac. Bluetooth does not function as well as USB on Windows or Mac computers.

Lights

Controls

Multi Function Button

• Press twice to switch between Bluetooth and / USB mode.
• Press & hold for 5 seconds to disconnect the connected Smartphone or Tablet Press once to Answer/End a call or Play/Pause music.
• Music will pause automatically when there is an incoming call from a Smartphone Press twice to reject an incoming call.

• When talking, press once to mute the mic input; Press again to unmute.
• Press once to increase the volume.
• Press & hold to increase the volume continuously until maximum level (A light beep sound will be heard when the volume level reaches maximum.
• Press once to decrease the volume.
• Press & hold to decrease the volume continuously until minimum level (A light beep sound will be heard when the volume level reaches minimum.

Technical Specifications

Frequently Asked Questions

Customer Support

If you have a question about your Cyber Acoustics Speaker Bar, our Customer Service Team wants to assist you. Contact us at: www.cyberacoustics.com/support/contact

Safety and Precautions

• All operating and use instructions should be followed.
• Protect the Speaker Bar from being pinched, particularly at the connectors. Unplug during lightning storms or when unused for long periods of time.
• Do not place near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampliers) that produce heat.
• Do not make alterations to the Speaker Bar.
• Do not place near naked flame sources, such as lighted candles.
• Do not expose to excessive heat (e.g. from storage in direct sunlight fire or the like 2022 Cyber Acoustics or its subsidiaries. All rights reserved. Cyber Acoustics and other trademarks are trademarks of Cyber Acoustics or its subsidiaries. Other trademarks may be trademarks of their respective owners
• Unique Identifier: (CA-2890BT)
• Responsible Party – Cyber Acoustics LLC 3109 NE 109th Ave., Vancouver, WA 98682 cyberacoustics.com

COMPLIANCE INFORMATION STATEMENT

FCC Part 15

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
3. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
4. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
5. However, there is no guarantee that interference will not occur in a particular installation.
6. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the user’s authority to operate the equipment.

RF exposure statement

This equipment meets the exemption from the routine evaluation limits in section 2.5 of RSS-102. It should be installed and operated with a minimum distance of 20cm between the radiator and any part of your body.

IC WARNING
This device contains licence exempt transmitter(s) that comply with Innovation, Science and Economic Development Canada’s licence exempt RSS . Operation is subject to the following two conditions

• This device may not cause interference.
• This device must accept any interference, including interference that may cause undesired operation of the device.

References

• Cyber Acoustics
• Cyber Acoustics
• Contact Support — Cyber Acoustics

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>