Cyber Acoustics CA-SP34BT Bluetooth Speakers Owner’s Guide

June 9, 2024
Cyber Acoustics

Cyber-Acoustics-logo

Cyber Acoustics CA-SP34BT Bluetooth Speakers

Cyber-Acoustics-CA-SP34BT-Bluetooth-Speakers-Product

Getting Started

Cyber-Acoustics-CA-SP34BT-Bluetooth-Speakers-fig-1

  • AC Power 120 volts only

WARNING

TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT USE THE PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. TO PREVENT ELECTRICAL SHOCK, MATCH THE WIDE BLADE PLUG TO THE WIDE SLOT, AND FULLY INSERT IT.

Danger: The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to a person.
Caution:  WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

IMPORTANT SAFETY INSTRUCTIONS

  1. Read these instructions – All the safety and operating instructions should be read before this product is operated.
  2. Keep these instructions -The safety and operating instructions should be retained for future reference.
  3. Heed all warnings – All warnings on the appliance and in the operating instructions should be adhered to.
  4. Follow all instructions All operating and use instructions should be followed.
  5. Do not use this apparatus near water The appliance should not be used near water or moisture for example, in a wet basement or near a swimming pool, and like.
  6. Clean only with a dry cloth.
  7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
  8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
  9. Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two blades with one wider than the other. A grounding plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for the replacement of the obsolete outlet.
  10. Protect the power cord from being walked on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus.
  11. Only use attachments/accessories specified by the manufacturer.
  12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
  13. Unplug the apparatus during lightning storms or when unused for long periods of time.
  14. Refer all servicing to qualified personnel. Servicing is required when the apparatus has been damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus have been exposed to rain or moisture, does not operate normally, or has been dropped.
  15. Please keep the unit in a good ventilation environment.
  16. CAUTION : These servicing instructions are for use by qualified service personnel only. To reduce the risk of electric shock, do not perform any servicing other than that contained in the operating instructions unless you are qualified to do so.
  17. WARNING: Please refer the information on the exterior bottom enclosure for electrical and safety information before installing or operating the apparatus.
  18. WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. The apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall not be placed on the apparatus.
  19. WARNING: The battery (battery or battery or battery pack) shall not be exposed to excessive heat such as sunshine, fire or the like.
  20. WARNING: The mains plug is used as a disconnect device, the disconnect device shall remain readily operable. 21.1D1 This is CLASS II apparatus with double insulation, and no protective earth Provided.
  21. Invisible laser radiation when open and interlocks defeated. Avoid exposure to ~ beam of laser.
  22. Correct Disposal of this product. This marking indicates that this product should not be disposed of with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources.
  23. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmentally safe recycling.
  24. Do not install this equipment in a confined space such as a bookcase or similar unit. The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.
  25. No naked flame sources, such as lighted candles, should be placed on the apparatus.
  26. Attention should be drawn to the environmental aspects of battery disposal.
  27. Use of the apparatus in moderate climates.

Welcome.
Your Bluetooth Three-Piece Lighted Powered Speaker System

Introduction

This speaker system is designed to deliver superior audio performance to home theaters, computers, tablets, smartphones, iPod®, MP3 players, DVD players, and other portable audio devices. The system offers high efficiency, long excursion drivers combined with a low distortion, high powered amplifier to provide clarity with deep bass, delivering a greater dynamic audio range.

Box Contents

  • 2 x satellite speakers
  • Subwoofer
  • RCA / 3.5mm Y Adapter
  • Owner’s guide with connection diagram

Caution

  • Do not plug the power supply in until all connections are made.
  • Use only the AC power cable supplied with these speakers.
  • Use a dry cloth for cleaning. Do not wipe any part of the system with cleaning solvents, such as furniture wax, bleach, benzene, acetone, or ammonia.

Speaker Preparation

  • Subwoofer —place the subwoofer in the desired location. For best performance place it on the floor near the wall. Adjust the distance from the corner or wall to affect the quality of bass performance as desired. Direct open port toward the wall to increase bass punch.
  • Satellite Speakers —For best stereo separation, place them on opposite sides of the listening device, computer, or TV screen (as far apart as possible is usually best). For example, if you are listening to the speakers using a laptop on a desk, place the left satellite speaker on the far left corner of the desk, and the right satellite speaker on the far right corner of the desk.

Speaker Connection

You can connect these speakers to a variety of devices, such as home theaters, laptops, computers, tablets, smartphones, iPods, MP3 players, CD players, DVD players, and other audio devices. Please read the following instructions along with the diagrams provided to identify which diagram most closely matches your connection source.

Bluetooth Connection

Cyber-Acoustics-CA-SP34BT-Bluetooth-Speakers-fig-3

First-time connection with new devices

  • When the system is switched on it will go into the Bluetooth pairing mode by default.
  • Bluetooth LED status light will begin blinking. Search your device’s Bluetooth list for “CA 2.1 BT SPEAKER” and tap to connect/pair.
  • After a successful connection, a tone will sound, and the Bluetooth LED status light will stop flashing and turn solid blue.

Reconnecting with previous devices

  • When the system is on, the speaker system will automatically search and attempt to connect with the last paired device.
  • Make sure this Bluetooth source is nearby the system to automatically reconnect.

LINE IN Connection

  • Speakers default to Bluetooth mode when initially turned on. Press the Source button once and you will hear a tone as the system switches to LINE IN mode. The LED status light will change to solid GREEN.
  • Connect your source device to the LINE IN jacks on the back of the subwoofer.

Controls & features

Control Panel

  1. Master volume control – Turn the knob to adjust the master volume of the speaker system
  2. Treble volume control – Turn the knob to adjust the tone of the speaker system
  3. Bass volume control – Turn the knob to adjust the bass volume
  4. Headphone output jack
  5. Status LED – Blinking Blue indicates Bluetooth pairing mode; Solid Blue indicates Bluetooth successfully connected; Solid Green indicates LINE IN mode
  6. Change of light pattern – LED with light up with below pattern in cycle Green => Blue => Red => Purple => Yellow => Light Blue => 6 color cycle => OFF
  7. Source button – Press once to turn from Bluetooth mode to LINE IN mode
  8.  LINE IN RCA jacks
  9. Power switch
    Cyber-Acoustics-CA-SP34BT-Bluetooth-Speakers-fig-5

Troubleshooting Bluetooth connections

Can’t connect for the first time

  1. Turn off the speaker completely and then turn it on the speaker. Follow the above manual on Bluetooth Connection for 1st-time connection.

Can’t connect when returning to the speaker system

  1. If the system does not automatically reconnect with your Bluetooth-enabled device, you may need to physically go to your device’s Bluetooth setting and manually select again “CA 2.1 BT SPEAKER” to reconnect.
  2. You may also try going to your device’s Bluetooth settings and selecting “Forget this device” to remove the speaker system from the list. You may need to turn off the Bluetooth function on your devices to fully clear the list. Then see the steps above by following the Bluetooth Connection for 1st-time connection.
  3. Check to see if any other devices are already connected to the system. The first indication for this is the speaker LED status light will show solid Blue. The speaker can only pair with one device at a time. Go to that source device to disconnect from the system first. Then you can follow the above steps for 1st time Bluetooth Connection.

Audio is choppy or keeps disconnecting

  1. be sure to check your room environment. Bluetooth technology has a range limit of approximately
    30 feet – line of sight. This generally means your best results will be limiting your source device and speakers to the same room. Extremely large rooms, or rooms with a lot of wireless electronics, wi-fi routers, etc., may affect the quality of sound, connection, or connection consistency.

  2. Check for obstructions, walls, too many people, or other objects that might impede the Bluetooth signal.

  3. Try returning the Bluetooth source device to closer proximity to your speakers.

Troubleshooting
The speaker system will not power on.

  • The power button is not turned on. Press and check for the blue LED indicator light to come on.
  • Verify the AC power cord is securely plugged into the wall outlet.
  • Check if the wall outlet, or power strip (if used), is actually getting power, i.e. not a switched outlet.

The speaker does not produce sound.

  • Verify the speaker is getting power. Check the above steps.
  • Make sure the volume is turned up to an audible listening level.
  • Verify that all cables are plugged into the correct jacks.
  • Often the issue is not with the speakers, but the sound source. The most common is connecting to a computer using an incorrect port/jack. Double check the speakers are connected to the audio output jack from your computer. Often this jack will be green. Also, make sure the media source volume settings are turned up and not set on mute.
  • If you’re still having problems, disconnect the speaker source cable and connect to a smartphone, iPod, or most anything with a 3.5mm headphone output. If your speakers then work, you know the speakers are functioning correctly and the issue likely lies with the computer or other source connections.

The sound is distorted.

  • Turn the volume down by 25% or 50%. If this does not work, also check the audio source volume level and decrease there if necessary.
  • Adjust the computer’s master volume control by balancing the volume until it’s at 50%, then adjust the volume levels on the speakers.

Additional support:
Online…
Get the latest updated video tutorials, FAQ, and product feature specifications available 24/7, or email support@cyberacoustics.com
Call in person…
Technical support is also available at 360-883-0333, M-F 8-5 United States West Coast time. iPod, iPhone, iPad, and iPad mini are trademarks of Apple, Inc.

FCC STATEMENT

  1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
  2. This device may not cause harmful interference.
  3. This device must accept any interference received, including interference that may cause undesired operation.
  4. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and the receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

FAQs

How do I turn on the speakers?****

Press and hold the power button for 3 seconds. The blue LED will flash and then turn solid. The speaker is now on.

How do I turn off the speakers?****

Press and hold the power button for 3 seconds. The blue LED will flash and then turn solid. The speaker is now off.

How do I connect my device to the speaker?****

Connect your device to the AUX IN port on the back of the speaker with a standard 3.5mm audio cable (not included). Your device will automatically play through the speakers.

How do I connect my device to the Bluetooth?****

Turn on your Bluetooth device and make sure it is in discovery mode (usually indicated by a search icon). Once your Bluetooth device has been discovered, select it from your list of available devices and enter any passcode if prompted (usually 0000). Your device will now be connected to the speaker via Bluetooth.

How do I disconnect my device from the Bluetooth?****

To disconnect your device from the Bluetooth, press and hold down both volume buttons until you hear two beeps indicating that you have disconnected from your Bluetooth device.

What determines the sound quality of a Bluetooth speaker?****

The sound quality of a Bluetooth speaker is the most crucial feature to consider. The overall harmonic distortion, which should be less than 1%, must be taken into consideration in order to determine the audio quality. The frequency range, which should be between 100Hz and 20kHz, is another crucial consideration.

How do Bluetooth outdoor speakers work?****

Similar to a car radio, a wireless Bluetooth speaker makes use of this technology. It does not require cables because it is connected directly to the sound source. Because of this, the Bluetooth speaker can be moved while continuing to play music from a source that is not in close proximity to it.

How do wireless computer speakers work?****

A transmitter attached to the stereo system sends alternating current through an antenna to convert electrical signals to radio waves. The antenna emits radio waves into the air. On the wireless speaker, an antenna and receiver pick up the radio signal, which the receiver then transforms into an electrical signal.

What makes a Bluetooth speaker louder?****

Consider the area you’re using while trying to make your wireless Bluetooth speaker louder. A room that is walled off will allow the sound to reflect off the walls, but a room that is open will allow the sound to dissipate as it moves away from the source.

Do Bluetooth speakers work without internet?****

Bluetooth connects two devices—like your phone and computer—by transmitting radio waves between them. Bluetooth can be used without a phone signal or internet connection. This indicates that it can operate anywhere in the world provided both of the devices you’re attempting to link support Bluetooth.

Video

Download PDF Link;Cyber Acoustics Bluetooth Speakers pdf

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Cyber Acoustics User Manuals

Related Manuals