Cyber Acoustics WC-3000 Essential 1080P 5MP Zoom USB Webcam User Guide
- June 4, 2024
- Cyber Acoustics
Table of Contents
- In the Package
- Features of the CA Essential Webcam 1080P 5MP
- Attaching the CA Essential Webcam 1080P 5MP to Your Monitor
- Using Applications on Your Mac Computer
- CA Essential Webcam 1080P 5MP Specifications
- Fixing Video Flickering
- Customer Support
- Safety and Precautions
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Quick Start Guide Webcam 1080P 5MP
Your Essential Webcam
In the Package
|
---|---
CA Essential Webcam 1080P 5MP| Quick-Start Guide
Features of the CA Essential Webcam 1080P 5MP
Connecting the CA Essential Webcam 1080P 5MP with Your Computer
Insert the end of the USB Webcam Cable into the USB Type-A port on your
computer as shown below.
The CA Essential Webcam 1080P 5MP features full plug-and-play support for
Windows, OSX / macOS, and Chromebooks. After plugging the webcam into the
computer’s USB Type-A port, you may start any application that accepts a USB
video stream, such as Skype, and begin using your webcam.
Note: To use the webcam’s internal microphone, you will have to select it as a
USB audio input in your application settings.
If the computer does not automatically recognize the webcam when it is plugged
into the USB Type-A port, try plugging the USB Webcam Cable into a different
USB Type-A port. If this does not work, then restart the computer. This will
cause the webcam to be recognized in most instances.
Attaching the CA Essential Webcam 1080P 5MP to Your Monitor
Using the CA Essential Webcam 1080P 5MP with Your
Windows and Mac Computer
To use the webcam with your Windows computer you will need to allow
applications
installed on your computer to access the webcam in the Windows security
settings.
- Select the Start button
- Select ‘Settings’
- Select ‘Privacy’ (Scroll down to the bottom of the page)
- Select ‘Camera’
- Turn on the ‘Allow access to the camera on this device
To use the webcam with your Mac computer you may need to allow applications installed on your computer to access the webcam in the Mac OS security settings.
- Select the Apple menu in the top left corner of the screen and choose ‘System Preferences’
- Select ‘Security & Privacy preference panel
- Select ‘Privacy’
- Select ‘Camera’ from the list on the left side
- Locate the application(s) you want to allow access to the webcam and check the box alongside the application name to enable the application to access the webcam
Using Camera Application on Your Windows 10 Computer
Camera application
- This allows you to preview the webcam image, and capture still frames and video clips.
- Select the Start button
- Select ‘Camera’ from the list of applications
After you open the Camera app:
- Select Photo or Video, then select it again to take a picture or start a video. If you are making a video, select Video again to finish the recording.
- To see your new photo or video, or ones you’ve taken before
- Select the Start button
- Select ‘Photos’ from the list of applications
Note:
If you are using a laptop with an integrated camera or have a second camera
installed, you will need to change the camera selected in the app so that the
CA Essential Webcam 1080P 5MP is selected.
- To select between cameras select the camera icon with the circular arrow in the top right corner of the application. Selecting the icon will switch between installed cameras.
- If only one camera is installed on your Windows computer, the camera icon with the circular arrow will not be displayed.
Using Applications on Your Mac Computer
Photo Booth Application – This allows you to preview the webcam image, capture
still frames and video clips.
Note: You will need to enable the webcam in the Mac OS security settings,
refer to instructions on page 2.
- Select the Finder button, select ‘Applications’ and then select ‘Photo Booth’
- At the top of the screen, select “Camera’ in the Photo Booth application menu and select ‘CA Essential Webcam 1080P 5MP’ from the list of options.
- To capture images from the webcam, select the red camera icon.
- To switch to video mode, select the film strip button in the bottom left corner of the application. The red camera icon will change to a video icon.
QuickTime Player – This allows you to easily create video recordings that use
the full webcam resolution.
Note: You will need to enable the webcam in the Mac OS security settings,
refer to instructions on page 2.
- Select the Finder button, select ‘Applications’ and then select ‘QuickTime Player’
- Select ‘File’ and then select ‘New Movie Recording’.
- To select the webcam input, select the small downward-facing arrow next to the round record button.
- Select the record button to capture the video.
CA Essential Webcam 1080P 5MP Specifications
Features:
- High-Resolution HD Digital Camera CMOS Sensor
- Maximum video size: 2592 x 1944 (5M pixels)
- USB 2.0 High-Speed
- Transmission: 2592 x 1944 up to 30 frames per second under MJPG mode.
- AWB (Automatic White Balance)
- Auto Focus
- View Angle: 65 degrees in the horizontal plane
- High-precision glass lens
- Built-in microphones
Basic System Requirements:
- 1GHz Intel® Core™2 Duo or above
- 512 MB RAM or more
- 200 MB available hard drive space
- Internet connection
- USB Type A 2.0 port
- OS X 10.7 or above
- Windows XP / 7 / 8 / 10
Requirements for 1080P 5MP Video Recording:
- 3GHz Intel® Core™2 Duo
- 2 GB RAM
- 2592 x 1944 HD screen resolution
Fixing Video Flickering
Video bickering can be xed by following the recommended settings:
- The Flicker Control setting is preset at 60Hz.
- When traveling to another country where the powerline frequency is 50Hz, you may nd that the video is bickering. This will require switching the Flicker Control to 50Hz.
- When returning back to your home country, switch the Flicker Control back to 60Hz.
There are two ways to stop your video from Pickering:
- Utilize a 3rd Party application called AMCap (see instructions below)
- Change through the settings of your Video Messaging application (see instructions on page 9)
Skype Application:
When using Skype with the CA Essential Webcam 1080P 5MP.
- Launch and sign in to Skype.
- Go to Tools > Options > Audio & Video Settings.
- Click the Webcam settings button.
- Change the PowerLine Frequency (Anti Flicker) based on the recommended settings as mentioned on Page 8.
- Click Apply and then click OK.
For other applications using Video, please refer to your software user guide on how to adjust the Flicker Control.
Customer Support
If you have a question about your CA Essential Webcam 1080P 5MP our Customer
Support Team wants to assist you.
Contact us at:
www.cyberacoustics.com/support/contact
Safety and Precautions
- Read and follow all instructions – All operating and use instructions should be followed.
- Protect the USB Type A Cable from being pinched, particularly at the connectors. Unplug during lightning storms or when unused for long periods of time.
- If the webcam becomes hot after running for a long time, stop using the webcam for a period of time to let the webcam cool down.
- Do not place near any heat sources that produce heat.
- Do not make alterations to the webcam.
- Do not place near naked flame sources, such as lighted candles
- Do not expose to excessive heat (e.g. from storage in direct sunlight, fire or the like).
- Avoid touching the lens with fingers, sharp or coarse materials; use a clean, soft cloth for cleaning.
- Avoid dropping the webcam; impacts may cause damage to the lens, internal malfunction or scratches to the camera surfaces.
2021 Cyber Acoustics or its subsidiaries. All rights reserved. Cyber Acoustics and other trademarks are trademarks of Cyber Acoustics or its subsidiaries. Other trademarks may be trademarks of their respective owners.
Supplier’s Declaration of Conformity 47 CFR § 2.1077 Compliance Information
Unique Identifier: (WC-3000)
Responsible Party – Cyber Acoustics LLC
3109 NE 109th Ave., Vancouver, WA 98682 cyberacoustics.com
Compliance Information Statement:
FCC Part 15
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna
- Increase the separation between the equipment and receiving device
- Connect the equipment into an outlet on a different circuit from the receiving device
- Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.