Shark RV850WV Series ION Robot Vacuum User Manual

: June 8, 2024
: Shark

Table of Contents

Shark RV850WV Series ION Robot Vacuum User Manual
Download the Shark ION Robot App
STEP 1: SET UP YOUR CHARGING DOCK
STEP 2: INSTALL THE SIDE BRUSHES
STEP 3: CHARGE WITH THE DOCK
STEP 4: PREP YOUR HOME FOR CLEANING
STEP 5: GET THE FULL EXPERIENCE WITH THE APP
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Shark RV850WV Series ION Robot Vacuum User Manual

Shark RV850WV Series ION Robot Vacuum

QUICK START GUIDE

This article contains the Quick Start Guide for the RV850WV Series Shark ION™ Robot Vacuum. This supports the following product SKUs RV850BRNG2, RV850BRNNWK, RV850SEED, RV850W, RV850WV, RV851WV, RV852WV, RV852WVQ, RV852WVQBL, RV852WVQBR, RV852WVQPL, RV852WVQRG, RVBRNG3, and RV850BRNGT.

QUICK START GUIDE

SHARK ION CLEANING SYSTEM

Your home is more than just floors. And messes happen above the floor, too—dirt hides on your countertops, couch cushions, window sills, and stairs. That’s why Shark® has developed an all-in-one answer to on-floor and above- floor cleaning to bring convenience to a new height.

TWICE THE INNOVATION.

TWICE THE SHARK PERFORMANCE.

FLIP OVER TO GET STARTED

Download the Shark ION Robot App

Boston engineers are always working to improve your cleaning experience—stay up to date with every innovation.

Register your product at sharkclean.com Get FAQs, further information, and access to future promotions.

Please be sure to read the enclosed Shark® Owner’s Guide prior to using your robot cleaning system.

CONGRATULATIONS ON YOUR NEW SHARK ION™ ROBOT

Getting Started is Easy – Follow These Simple Steps To Get Cleaning

STEP 1: SET UP YOUR CHARGING DOCK

Place dock with its back against a wall on a level surface, in an open, central area that the robot can easily access. Dock must be at least 3 feet away from corners.
Plug dock into a power outlet.

STEP 2: INSTALL THE SIDE BRUSHES

The 2 included side brushes snap onto the square pegs on the bottom of the robot. Align the hole in the brush over the peg and press down until brush clicks into place.

INSTALL THE SIDE BRUSHES

STEP 3: CHARGE WITH THE DOCK

Handheld vacuum:
Insert handheld into the charging port on the dock. Charging is complete when the light on the handheld vacuum turns solid blue.
(Approximately 2.5 hours for full charge.)

Robot:
Place robot on dock. The Power switch must be ON to charge. Blue lights will blink during charging, then illuminate steadily when charging is complete. (Approximately 3 hours for full charge.) When robot is fully charged, press the Clean button to start.

CHARGE WITH THE DOCK

STEP 4: PREP YOUR HOME FOR CLEANING

Remove robot-trapping obstacles such as loose power cords, clothes, toys, and low-hanging drapes. Use BotBoundary™ strips to block off furniture and create no-go zones.

STEP 5: GET THE FULL EXPERIENCE WITH THE APP

APP

With the Shark ION Robot app, you can easily schedule cleanings or send your robot into action from anywhere. Search “Shark ION Robot” in the app store, then download onto your iPhone™ or Android™

Tips, Tricks, and FAQs • Troubleshooting • Voice control setup for the Google Assistant and Amazon Alexa

Don’t forget to register your robot at registeryourshark.com
Please be sure to read the enclosed Shark® Owner’s Guide prior to using your unit.

For assistance, visit us online at sharkclean.com or contact us at 800-798-7398

AMAZON, ALEXA, and all related logos are trademarks of Amazon.com, Inc. or its affiliates. APPLE, the Apple logo and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. APP STORE is a service mark of Apple Inc., registered in the U.S. and other countries. GOOGLE, GOOGLE ASSISTANT, GOOGLE PLAY, the Google Play logo, and ANDROID are trademarks of Google LLC.