Homedics EnviraScape Water Weave Manual WFL-WW

: June 8, 2024
: Homedics

Table of Contents

EnviraScape Water Weave
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ILLUMINATED TABLETOP RELAXATION FOUNTAIN

EnviraScape Water Weave

EnviraScape

Instruction Manual

The soothing sounds of nature

Thank you for purchasing EnviraScape, HoMedics’ tabletop relaxation fountain. This, like the entire HoMedics product line, is built with high-quality craftsmanship to provide you years of dependable service. We hope that you will find it to be the finest product of its kind.

EnviraScape enables you to create an all-encompassing environment with sound. The sound of flowing water enhances your environment by releasing negative ions, and promoting relaxation. Only EnviraScape offers you the luxury of these vital benefits with its creative design which adds beauty to any indoor environment.

EnviraScape Features

Innovative, artistic design enhances the environment at home or at work.
Special effect lighting illuminates fountain for a more dramatic effect.
The soothing sound of water creates a stress free ambiance.
Improves concentration by masking distractions so you can stay focused.
Durable electrical water pump can be operated from any indoor electrical outlet.
Convenient tabletop size-fountain measures 9.25″L x 4.25″W x 15″H.

IMPORTANT SAFETY INSTRUCTIONS:

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING

DANGER – To reduce the risk of electric shock:

Always unplug the appliance from the electrical outlet immediately after using and before cleaning.
Do not reach for an appliance that has fallen into water. Unplug it immediately.
Do not place or store appliance where it can fall or be pulled into a tub or sink. Do not place in or drop into water or other liquid.
Do not connect to any voltage other than that shown on the pump.
Do not pump flammable liquids.
Do not use water above 86° Fahrenheit.

CAUTION: The pump must be completely submerged in water. If the pump is making noises, most likely it is not completely submerged in water.

WARNING – To reduce the risk of burns, fire, electric shock or injury to persons:

An appliance should never be left unattended when plugged in. Unplug from outlet when not in use and before putting on or taking off parts or attachments.
Close supervision is necessary when this appliance is used by or near children, invalids or disabled persons.
Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by HoMedics; specifically any attachments not provided with the unit.
Never operate this appliance if it has a damaged cord, plug, pump, cable or housing. If it is not working properly, if it has been dropped or damaged, return it to Homedics Service Center for examination and repair.
Keep cord away from heated surfaces.
Never drop or insert any object into any opening.
Do not operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not carry this appliance by power cord or use cord as handle.
To disconnect, remove plug from outlet.
This appliance is designed for indoor use only. Do not use outdoors.

CAUTION: Only set the fountain and fountain parts on waterproof surfaces

SAVE THESE INSTRUCTIONS

Caution – Please read all instructions carefully before operating.

Never leave the appliance unattended, especially if children are present.
Never cover the appliance when it is in operation.
This unit should not be used by children without adult supervision.
Connect the pump with the proper voltage as indicated on the pump label.
Always keep the cord away from high temperature and fire.
Unplug the pump from power source before cleaning, maintenance or disassembling.
To get the best flowing effect, product must be placed on a flat surface and should never be placed on an electrical appliance.
Never let pump run dry, as this will shorten life of the pump.
Do not lift, carry, hang, or pull the pump by the power cord.
Operate with tap or distilled water.
Operate pump completely submerged for proper cooling.
The electrical cord of this product cannot be replaced. If it sustains damage, you must stop using this product immediately and return it to the HoMedics Service Center for repair. (See the warranty section for HoMedics address.)
Disconnect the appliance from outlet before putting hands into water.

Assembly and Instructions for Use

1. Unpack the product. Wipe off dust with a damp cloth. (Fig 1)

Attention: In order to get best results, please operate pump completely submerged. Keep the water level above the minimum water level ALL THE TIME.

2. Familiarize yourself with the pump. The switch located at the front of the pump controls the pump speed. The speed is indicated by a plus (+) and minus (-) sign. To increase the speed, move the switch slowly left in the direction of the plus sign. You will hear a click as the switch moves to each speed level. At its highest speed level, the switch will cease to move any further. To decrease the pump speed, move the switch right toward the minus sign. Similarly, at its lowest speed, the switch will cease to move any further (Fig 2).

NOTE: It is recommended the pump be set at its highest speed during assembly and later adjusted to a lower setting if desired. Be sure to unplug the pump before adjusting the speed setting.

3. Insert the tube into the pump. (Fig. 3)

Figure 3-4

4. Place cover on top of the fountain. (Fig. 1)

5. Fill lower basin, from the rear of the fountain, with clean water until the water completely submerges the top of the pump. (Fig. 4)

6. Attach the A/C adaptor jack to the pump power cord. DO NOT plug into outlet at this time. (Fig. 1)

7. Set the fountain on a level, waterproof surface.

8. Plug the cord into 120V household outlet. The switch located on the power cord controls the fountain. If pump doesn’t operate, rotate in-line switch once to turn “on” and once more to turn “off”. Monthly maintenance will add to your pump’s life.

At first, water may splash due to the dry weave surface. Use fingers to wet entire weave surface to help avoid splashing.

NOTE: Ensure that the electrical cord loops below the electrical outlet to form a ‘Drip Loop’ (Fig. 5). This will prevent water from running down the cord into the electrical outlet.

Figure 5-6

Maintenance

To clean the pump:

Unplug from electrical outlet. Remove it from the base of the fountain. Use a small brush or stream of water to remove any debris (Fig 6).

To keep water clean:

Periodically change water and clean the product according to the water condition. Keeping the water clean prevents the water from becoming sticky and forming micro-organisms. We recommend distilled water to prevent mineral build-up.