Sifely O Best Smart Door Lock Installation Guide

Sifely O Best Smart Door Lock

Specifications

• Model: O
• Version: V0.1-2024
• Includes: Exterior Keypad, Mounting Plate, Interior Lock, Fobs, Keys, Strike Plate, Bolt, Strike Plate Screws, Bolt Screws, Mounting Plate Screws, Interior Lock Screws

Product Usage Instructions

Exterior Keypad Installation:
Install the exterior keypad by following these steps:

• Locate the cable hole on the bottom of the plate.
• Align the plate into the holes on the door.
• Secure the keypad in place using the provided screws.

Mounting Plate Installation:
To install the mounting plate:

• Follow the instructions provided in the manual.
• Secure the mounting plate using the included screws.

Registering and Using the App
To register and use the Model O app:

• Tap on ‘Register’ to start the registration process.
• Fill out the required information and tap ‘Get Code’.
• Enter the verification code received and tap on ‘Register’.
• Use the app to unlock/lock the device within Bluetooth range.

Adding Fingerprints
To add fingerprints:

• Access the fingerprint settings in the app.
• Select the type of fingerprint authentication desired.
• Follow the on-screen instructions to add fingerprints.

Lock Settings
Adjust lock settings as needed:

• Customize wireless keypad settings.
• Enable door sensor features.
• Utilize gateway for remote unlock functionality.
• Adjust lock sound levels.
• Explore other advanced settings such as firmware updates and data import/export.

Frequently Asked Questions (FAQ)

Q: How do I troubleshoot fingerprint recognition issues?
A: To troubleshoot fingerprint recognition problems:

• Ensure the sensor surface is clean.
• Try using a different finger for recognition.
• Ensure your finger is moist enough for accurate readings.
• If issues persist, remove and reinsert the batteries after a minute.

Model O
Installation and Setup guide

Start here!
Scan this QR code to watch the interactive installation videos first and use this manual as a guide.

Or go to https://www.sifely.com/tutorials/o to watch short installation video.

Parts in the box

Explosive View

Install the bolt.

• Hold the bolt in front of the door hole to check the T shaped hole centered in the door hole.
• If the T shaped hole is centered in the door hole. No adjustment needed ! Proceed the next step.
• If the T shaped hole is NOT centered in the door hole,adjust needed.See Bolt adjustment

Bolt adjustment(only if needed)

Install the bolt.

• Align strike plate with deadbolt latch.Ñ
• Make sure UP arrow on the deadbolt is facing upwards.

Note: If the deadbolt latch is extended, use a small flathead screwdriver to rotate slot until deadbolt latch is retracted.

Install Exterior Keypad

1. The bump on the tailpiece aligns with the slot in the bolt as shown.
2. Guide the wire cable UFDER the V deadbolt.
3. Slide the keypad in place,V making sure its on the exterior
 part of your door.

Install your lock with the door open.Do not close your door until all the steps are completed.

Install Mounting Plate

1. Route the cable through the cable hole on the bottom of the mounting plate.
2. Guide posts of the mounting plate into the holes on the exterior keypad.
3. Tighten screws with a screwdriver to secure the mounting plate with screws.

• Make sure the outside keypad and the mounting plate is straight before tightening screws all the way.
• Refer to measurements B, C, and D on the Door Checker paper to select screwsÎ

Ensure that screws are secure enough, but DO NOT over tighten screws.

Attach Wire Cable to Interior Lock

1. Remove battery cover by pulling it upwards off the body of the interior lock.
2. Make sure the side of the cable end with the ridges and the marked line faces outward.
3. Push cable into the designated slot until you hear a click.
4. Route the cable into cable hook.

Please DO NOT install batteries until complete step 6

Install Interior Lock

When fully tightened, lock should be flush to door

Test the lock and check door alignment

• With the door open,insert the key to extend the bolt.Ensure that the bolt extends smoothly.
• Turn the key 270 to retract the bolt.Ensure that the door unlocks smoothly.
• Close the door,Insert and rotate the key to lock the door.Ensure that the door locks smoothly.
• Turn the key 270 to retract the bolt.Ensure that the bolt retracts smoothly.

Ensure that the bolt opens and closes smoothly will optimize battery life.
If the bolt doesn t extend or retract during testing,visit sifely.com/faqs-O. Or contact Sifely Customer Support at sifely.com

Perform Calibration for your door

1. Keep your door open
2. Install 4AA batteries.
3. Enter 123456#”, your lock will enter door handing process.When the bolts stops moving,the process is complete.

Your lock is now installed!
Remember, you still have to set up your lock to use it.

Feed Help?
If the bolt doesn’t extend or retract during testing,visit sifely.com/faqs-O.

Set Up with APP

1. Scan the QR code or visiting sifely.com/download 
on your smartphone.
2. Register Sifely account and log in the account
3. Pair the lock follow the app guide and start to use it.

The Sifely app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step is performed by the homeowner.

Using Your Lock

Lock your door from outside

1. Wake up the keypad first,press and hold # on keypad.
2. Enable auto lock feature and the lock will lock automatically.
3. Open app and tap icon within bluetooth range.

Unlock your door from outside

1. Wake up the keypad tap you code + # to unlock
2. Place your finger on fingerprint scanner
3. Place your Fob on fob reader area
4. Open app and hold icon within bluetooth range.

Connect to Your Lock

There are two ways to connect to your lock with Sifely app. When you’re near your lock you can connect through Bluetooth and if you have a way vol can connect remotely throuch Wi-fi With Bluetooth connection, you can use your app to lock/unlock,create or manage entry codes, change settings, check who used the lock, etc. while you re within Bluetooth range of the lock.
With Wi-Fi connection, you can be away from home and use your app to operate your lock, monitor who s coming and going, and create or manage entry codes. To connect your lock to your Wi Fi network, you will need a gateway as bridge between router and lock. Please note that gateway is sold separately.

Features

Return and Warranty Information

Return Policy
30 day money back guarantee from date of purchase. Some exceptions may be made with a restocking fee on a case by case basis and buyer may be responsible for return shipping cost. For inquiries regarding this, please contact us at cs@sifely.com.

Product Warranty
We offer a 1 year free replacement from the date of purchase. To claim your warranty replacement, the first request or inquiry must be made within 1 year of date of purchase. Any requests or inquiries after 1 year from the date of purchase are not eligible for warranty. Sifely reserves the right to deny a replacement request. For inquiries regarding this, please contact us at cs@sifely.com.

FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/ TV technician for help.

Warning: Changes or modifications to this device, not expressly approved by LIFYFUN LLC.could void the user s authority to operate the equipment.

Email us first ! We are here to help.
For any technical questions or support, please email us at cs@sifely.com or visit our website sifely.com to chat with us.
Support is available: MON-SUN- 9 AM to 5 PM PST www.sifely.com

HOW TO REGISTER
Download the Sifely app by scanning the QR code or visiting sifely.com/download on your smartphone.

1. STEP 1 Tap on register to get started!
2. STEP 2 Fill out this and then tap “Get Code”. You will be sent a verification code to verify your account ! Once you receive it, tap on “Register”

Note: The Sifely Smart Lock app is needed to use this lock. If this lock was professionally installed (or installed by someone other than the homeowner), make sure this step is performed by the homeowner.

PAIRING YOUR LOCK

LOCK PAGE OVERVIEW

APP UNLOCK/LOCK

Note: This will only work while you are within bluetooth range of the lock.
Refer to Sifely Gateway Guide page for remote unlock/lock information.

PASSCODES

Here is a breakdown of the 6 different code types for different durations.

PASSCODES

Pay attention to this text when generating a code.
You may experience issues if these instructions are not followed.

Note: To generate custom codes, you will need to be within bluetooth range of the lock unless a Sifely Gateway is connected.

IC CARD / FOBS

1. Tap on Cards .
2. Tap on Add Card
3. Choose the validity period of the lock.
4. Once the lock says Please swipe your card , lace the fob against 5 on the keypad.
5. If you hear input successful , the fob can be used to unlock your lock.

Sifely Fobs can be programmed to work with multiple Sifely Locks.

ADD FINGERPRINTS

eKEYS

Best Practices:
It is strongly recommended that the recipient first register an account using the Sifely Smart Lock app.

Scan this QR for more information

AUTHORIZED ADMIN

Step1
Authorized Admins are similar to eKeys; however, an authorized admin can do the following:

1. Unlock/lock via the app.
2. Generate, Edit, Delete passcodes,IC cards, &Fingerprints.
3. Adjust settings like passage mode, auto-lock timer & turn on/off the lock sound.

Step2
Enter recipient’s username. It will be the phone number or email address used during registration.

Scan this QR for more information

PASSAGE MODE & AUTO LOCK

Step1
Auto lock will automatically lock the lock when it has been open after 5 second by default. This can be adjusted with Passage Mode and Auto lock timer. Outlined below is how to adjust these settings related to auto lock.

LOCK SETTINGS

• Here are some settings you should familiarize yourself with.
• Under Basics， you can view and change information such as Lock Name.
• Gateway shows signal strength if Sifely Gateway is connected.
• With on and a Sifely Gateway connected, you can remotely unlock/lock your lock. Remote Unlock Lock Sound adjusts the locks sound level.
• Import from another lock allows for the transfer of passcodes and fobs from one lock to another.
• Delete will remove the lock from your account and clear any settings on the lock. You must be near the lock to do this.

SIFELY WIRELESS KEY FOB

1. Tap on Wireless Key Fob
2. Tap on Add Key Fob
3. Choose validity period.
4. Follow on app instructions to pair the wireless ey fob.
5. Use unlock and lock to interact with lock.

Note: A Wireless Key Fob can only connect to one lock.

INTEGRATIONS
Our locks work with the following software:

With more to come in the near future.

Scan this code to find out how to connect your locks!

SIFELY GATEWAY
The Sifely Gateway bridges any nearby locks to your local wifi allowing for remote control.

With the Sifely Gateway connected

• Receive unlock notifications wherever you are.
• Remote unlock/lock.
• Check access logs whenever you need them.
• Generate, edit, or delete custom codes for your guests.
• Access the features of the webportal version of our app for free!
• Check battery level remotely.

FAQ

• Q: I entered a code or fingerprint incorrectly too many times and my lock will not accept any new inputs.

  • A: Unlock the lock once via the app or wait 5 inutes.

• Q: How can I manually lock the lock?

  • A: Press and hold # to lock the lock.

• Q: The batteries died before I could replace them. What can I do?

  • A: Use the provided physical keys to open or plug in a powerbank into the slot on the underside of the keypad to power it up to be able to enter and change the batteries.

• Q: How do I share access of the lock on 2 different phones?

  • A: Refer to eKeys or Authorized Admin section on how to do that is.

• Not working like it should? Contact us with the following information for quicker resolution.

  • Which product do you have?
  • Where are you in the setup process?

• Installing the product.

  • Setting up the app and pairing the product.
  • Already set up app with the product.

• How long have you had our products for?
  Here is how you can contact us:

  • Email: cs@sifely.com
  • Live Chat: sifely.com
  • Text/SMS: 805-519 8895

References

• Sifely - Best Smart Door Lock for Airbnb, Homes, Apartments, Offices | USA
• Sifely - Best Smart Door Lock for Airbnb, Homes, Apartments, Offices | USA
• Sifely - Best Smart Door Lock for Airbnb, Homes, Apartments, Offices | USA
• Video Tutorials | Sifely S Smart Lock

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>