MOVO WMX-7-RX Wireless Receiver Instruction Manual

June 3, 2024
MOVO

MOVO WMX-7-RX Wireless Receiver

Introduction

Thanks for choosing Movo!
The Movo WMX-7 is a 12-Channel VHF wireless microphone system designed to work with smartphones, tablets, DSLRs, audio recorders, PCs, and more.
Lightweight and easy to use, the RX receiver offers flexibility without sacrificing high-quality audio. It can receive signals at a range of up to 164 feet away without obstacles.

Package contents

  • One WMX-7-RX receiver
  • One 3.5mm to TRS audio output cable
  • One 3.5mm to TRRS audio output cable
  • One belt clip
  • One cold shoe mount adapter
  • User manual

Receiver

  1. Antenna

  2. power Indicator

  3. Volume Control Wheel

  4. Line Out Jack

  5. Monitor Connector (3.5mm diameter stereo mini jack)

    • To monitor the receiver output, plug your headphones into this port.
      NOTE
      Do not connect headphones with a monaural mini jack.
      This may lead to short-circuiting Of the headphone output, resulting in distorted sound output.
  6. Power Switch

  7. Battery Compartment

  8. Cold Shoe Mount Adapter

  9. Belt Clip

What’s the difference?

  1. 3.5mm TRRS connector
    • For smartphones, tablets, or computersMOVO-WMX-7-RX-Wireless-Receiver-fig-02
  2. 3.5mm TRS connector
    • For cameras, audio recorders, and other audio/video recording devicesMOVO-WMX-7-RX-Wireless-Receiver-fig-03

LED Indicator and Battery Indication Status

Transmitter and receiver

are connected

| Transmitter| LED indicator staysblue
---|---|---
Receiver| LEDindicator staysblue
Transmitter and receiver

are disconnected

| Transmitter| LED indicator staysblue
Receiver| LEDindicator blinking blue
Receiver power low| Low battery| LEDindicator staysred
Transmitter power low| Low battery| Battery icon on screen is empty and blinking.

Setup Guide

Install antenna

Screw antenna clockwise into jack until secure.

NOTE

  • Do not touch the antenna while recording.
Install batteries

The receiver is powered by two AA batteries.

  • Push the two catches in the direction Of the arrows and open the battery compartment cover.
  • Insert two batteries in the correct polarity as shown.
  • Close the battery compartment cover.

NOTE

  1. When the low power indicator appears, change the batteries immediately.
  2. When not using the receiver for a long period of time, remove the batteries to avoid leakage.

Screw the shoe mount adapter onto receiver

Pair the transmitter and receiver

Using the microphone with smartphones, tablets, or computers

Receiver

  1. Mount the receiver to your smartphone, tablet, or computer.
  2. Using a TRRS cable, insert the locked plug into the receiver’s “LINE OUT” jack.
  3. Plug the other connector into the audio jack of your smartphone.
  4. Plug your earphones into the ” ” port to monitor sound.
  5. Slide the power switch to the ON position (the LED indicator will light up blue)

NOTE
For help distinguishing between TRS and TRRS cables, refer to the “What’s the difference?”.

MOVO-WMX-7-RX-Wireless-Receiver-fig-06

Transmitter and receiver pairing

Please follow the steps below:

  1. Press the channel selector button on the transmitter. The LED screen will display the channel (CH) number.
  2. The receiver will connect with the transmitter automatically.
  3. Change channels until you could get very clear feedback.

How to connect the transmitter and receiver
If you lose or damage the transmitter or receiver, or need to reconnect them, please follow the steps below:

  1. Turn the power switch of the transmitter to the ON position.
  2. Press and hold the channel selector button on the transmitter until the screen flashes.
  3. Turn the power switch on the receiver to the ON position.
  4. Wait for about 3-5 seconds until the receiver light turns Off.
  5. press the channel selector button on the transmitter.

If the LED indicators Of the transmitter and receiver stay blue, the system has been connected.
If not, try 1-5 steps again.

Using the microphone with DSLR cameras, audio recorders, and other recording devices

Receiver

  1. Mount the receiver to your camera, audio recorder, or other audio/video recording devices.
  2. With the TRS cable, insert the other end of the connecting cable into the receiver u LINE OUT” jack.
  3. Plug the 3.5mm connector into the audio jack of your camera.
  4. Plug your earphones into the ” ” port to monitor sound.
  5. Slide the power switch to the ON position (the LED indicator will light up blue).

NOTE
For help distinguishing between TRS and TRRS cables, refer to the “What’s the difference?”.

Features

  • Compatible with smartphones, tablets, DSLRs, PCs, etc.
  • High-band VHF operation for superior sound
  • 12 switchable channels to keep you free from interference
  • Detachable and flexible antenna with rotating 3600 function
  • Automatically matched for transmitter
  • Volume control wheel
  • Real-time playback monitoring
  • Operational range up to 131 feet away without obstacles
  • Compact and easy-to-use design
  • Powered by two AA-size alkaline batteries for both receiver and transmitter
Operating Frequencies
CH·! CH-2 CH-3 CH·4 CH-5 CH-6
204.0MHz 205.0MHz 206.0MHz 207.0MHz 208.0MHz 209.0MHz
CH-7 CH-8 CH-9 CH-10 CH-11 CH-12
210.0MHz 211.0MHz 212.0MHz 213.0MHz 214.0MHz 215.0MHz

Specifications

System

Operating Frequencies: 204-215MHz
Modulation Frequency: DQPSK
Channels: 12

Transmitter

Modulation Sensitivity: 6 mV input for full deviation
Battery: LR6/AA size alkaline battery (not included)
Current Consumption: 160 mA
Dimensions: 102 x 62.0 x 44.7 mm (4.0″ x 2.4″ x 1.8″)
Antenna Length: 142mm(5.6″)
Weight: 80 g (2.8 oz) without battery

Receiver

Reception Sensitivity: 2 WV for 30 dB S/N
Output Connector: 3.5 mm (1/8″) TRS
Battery: LR6/AA size alkaline battery (not included)
Current Consumption: 140 mA
Dimensions: 102 X 62.0 X44.7 mm (4.0″ X 2.4″ X 18M)
Antenna Length: 142mm(5.6″)
Weight: 80 g (2.8 oz) without battery

FCC STATEMENT

This device complies with part 15 Ofthe FCC Rules.
Operation is subject to the following two conditions:

  1. This device may not cause harmful interference.
  2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfulinterference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment Off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

RF warning statement:

  • The device has been evaluated to meet general RF exposure requirement.
  • The device can be used in portable exposure condition without restriction.

HAPPY? LET US KNOW!
We love to hear from customers!
Share your experience With Others by reviewing your prcxiuct on Amazon. Scan the QR ccxie below or visit: amazon.com/review/review-your- purchases#:

Act Now!
This product includes a I year limited warranty. If you register the product within 30 days Of purchase, you’ll receive an additional I-year warranty extension for a total of two years of protection.
To register your product and for full details on the warranty, visit www.movophoto.com/warranty or scan QR code:

NOT HAPPY? LET US HELP!
Have any questions or concerns?
Our friendly and responsive customer service wants to make sure you have the best experience possible!
Call us at 1-800-354-1739
Monday-Friday: 9 am – 4 pm (PST)
Email us at support@movophoto.com
Live chat us at www.movophoto.com

Facebook & Youtube: /movophotogroup
Twitter & Instagram: @movophoto

Movo
www.movophoto.com
support@movophoto.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals