MOVO EM003S Mirror Cabinet with LED Instruction Manual
- June 5, 2024
- MOVO
Table of Contents
MOVO EM003S Mirror Cabinet with LED
AImportant Nofification
- Please make sure all parts are intact before installation. When the product is taken out, it
- WOUld be a buffer to put them on a smooth surface to prevent scratches.
- If might be sharp at the edges and comers as the frame is made of aluminum, please protect yourself from being scratched during installation.
- Standing on a safe platform when working at heights.
- Be sure there are no hidden cables or pipes on the wall before darling.
- Wearing appropriate goggles when dialing.
- Be careful when using power tools near water.
- The main power must be turned off before the electrical installation.
- The product is for indoor use only.
- The electrical components must keep away from moisture.
- This product is manufactured for IP44 grade standards.
Wall Types
- The fixtures provided are usually used for solid walls.
- if mounted on file, please use a ceramic drill and insert a wall plug under the file.
- Accessorize includes
- Tools needed
Installation Steps
Confirm the location
Please mark the hole locations on the wall according to the hole spacing on the back of the mirror, and drill the holes by the marks, then insert the rubber plug screws (NO.1 in the pic) into the wall. Please remember that install at least 2 screws to ensure stability.
Install the mirror
Tun the metal screws(NO.2 in the pic) into the rubber plug screws and leave gaps, then hang the mirror according to the position of the corresponding hole.
Note – When mounting to the wall, the wire can not be pressed between the mirror and the wall, otherwise, the wire installation will be affected.
Install the plug
Please purchase an appropriate plug to access the live wire () and naught wire (N), ensuring safe use.
Test
After the installation is complete, please test whether the LED lights are normal. If not, please check if the plug and wire are successfully installed. Have any questions, you could contact the service team freely for help.
LED Light
9 Brightness Modes(3 colors x 3 brightness settings) Press the button to choose 3 different color modes (White, Warm, white & Warm light), then press to adjust Low/Medium/High brightness for each color mode.
Thank you for purchasing this product. If you have any questions, please contact Our customer service department. We are always willing to help you.
Documents / Resources
| MOVO
EM003S Mirror Cabinet with
LED
[pdf] Instruction Manual
EM003S Mirror Cabinet with LED, EM003S, Mirror Cabinet with LED
---|---