MOVO WMX-7-TX Wireless Transmitter Instruction Manual
- June 4, 2024
- MOVO
Table of Contents
WMX-7-TX Wireless Transmitter
Instruction Manual
WIRELESS TRANSMITTER
INSTRUCTION MANUAL
Introduction
Thanks for choosing Move!
The Movo WMX-7 is a 12-channel VHF wireless microphone system designed to work
with smartphones, and tablets. DSLRs, audio recorders, PCs, and more.
The TX transmitter has two mic sockets, allowing you to use two microphones at
the same time. This is ideal for interviews, filmmaking, and business
presentations, as well as any other applications involving multiple speakers.
Lightweight and easy to use, the TX offers flexibility without sacrificing
high-quality audio. It can operate at a range of up to 164 feet away without
obstacles.
Package contents
- One WMX-7-TX transmitter
- One omnidirectional lovelier microphone
- One foam windscreen
- One microphone holder clip
- One belt clip
- User manual
Transmitter
1. Antenna
2. Power Indicator
3. Microphone Input Jack
4. Channel Selector Button
5. LCD Screen| 6. Battery Compartment
7. Power Switch
8. Belt Clip
9. Channel Indicator
10. Battery indicator
11. Signal indicator
---|---
What’s the difference?
-
3.5mm TRIIS connector – For smartphones, tablets, or computers
-
3.5mm TRS connector – For cameras, audio recorders, and other audio/video recording devices
LED Indicator and Battery Indication Status
The transmitter and receiver are connected| Transmitter| LED indicator stays
blue
---|---|---
Receiver| LED indicator stays blue
The transmitter and receiver are disconnected| Transmitter| LED indicator
stays blue
Receiver| LED indicator blinking blue
Receiver power low| Low battery| LED indicator stays red
Transmitter power low| Low battery| The battery icon on the screen is empty
and blinking
Setup Guide
-
Install the antenna
Screw antenna clockwise into jack until secure.
NOTE – Do not touch the antenna while recording. -
Install batteries
The transmitter is powered by two AA batteries.
– Push the two catches In the direction of the arrows and open the battery compartment cover.
– Insert two batteries in the correct polarity as shown.
– Close the battery compartment cover.
NOTE -
When the low power indicator appears, change the batteries immediately.
-
When not using the transmitter for a long period of time, remove the batteries to avoid leakage.
-
Pair the transmitter and receiver
Using the microphone with smartphones, tablets, or computers
Transmitter
- If you need to capture audio from two different subjects, plug a microphone into each of the” ports.
- Slide the power switch to the ON position (the LED indicator will light up blue).
- Use the clip on the back of the unit to attach the transmitter to a belt, or it simply can be placed into a pocket.
Receiver
- Mount the receiver to your smartphone, tablet, or computer.
- Using a TRRS cable, insert the locked plug into the receiver’s ‘UNE OUT” jack.
- Plug the other connector into the audio Jack of your smartphone.
- Plug your earphones Into the “ ****– port to monitor sound.
- Slide light up blue) the power to the ON position (the LED indicator will
NOTE For help distinguishing between TRS and TRRS cables, refer to the ‘What’s the difference?’ section on page 3.
Transmitter and receiver pairing
Please follow the steps below:
- Press the channel selector button on the transmitter. The LED screen will display the channel (CH) number.
- The receiver will connect with the transmitter automatically.
- Change channels until you could get very clear feedback.
How to connect the transmitter and receiver
If you lose or damage the transmitter or receiver, or need to reconnect them,
please follow the steps below:
- Turn the power switch of the transmitter to the ON position.
- Press and hold the channel selector button on the transmitter until the screen flashes.
- Turn the power switch on the receiver to the ON position.
- Wait for about 3-5 seconds until the receiver light turns off.
- Press the channel selector button on the transmitter.
If the LED indicators of the transmitter and receiver stay blue, the system
has been connected. If not, try 1-5 steps again.
Using the microphone with DSLR cameras, audio recorders, and other
recording devices
Transmitter For help setting up the transmitter, please refer to the
“Transmitter section on page 5.
Receiver
- Mount the receiver to your camera, audio recorder, or other audio/video recording devices.
- With the TRS cable, insert the other end of the connecting cable into the receiver “LINE our jack.
- Plug the 3.5mm connector into the audio jack of your camera.
- Plug your earphones into the ” ****” port to monitor sound.
- Slide the power switch to the ON position (the LED indicator will light up blue).
NOTE For help distinguishing between TRS and TRRS cables, refer to the
“What’s the difference?” section on page 3.
Features:
– Compatible with smartphones, tablets, DSLRs, PCs, etc.
– High-band VHF operation for superior sound
-12 switchable channels to keep you free from interference
– Detachable and flexible antenna with rotating 360° function
– Two mic jacks on the transmitter for easy interview recording
– Automatically matched for the receiver
– Volume control wheel
– Real-time playback monitoring
– Operational range up to 131 feet away without obstacles
– Compact and easy-to-use design
– Powered by two AA-size alkaline batteries for both receiver and transmitter
Operating Frequencies
CH-1 | CH-2 | CH-3 | CH-4 | CH-5 | CH-6 |
---|---|---|---|---|---|
204.0MHz | 205.0MHz | 206.0MHz | 207.0MHz | 208.0MHz | 209.0MHz |
CH-7 | CH-8 | CH-9 | CH-10 | CH-11 | CH-12 |
210.0MHz | 211.0MHz | 212.0MHz | 213.0MHz | 214.0MHz | 215.0MHz |
Specifications
System
- Operating Frequencies: 204-215MHz
- Modulation Frequency: DQPSK
- Channels: 12
Transmitter
- Modulation Sensitivity: 6 mV input for full deviation
- Battery: LR6/AA size alkaline battery (not included)
- Current Consumption: 160 mA
- Dimensions 102 x 62.0 x 44.7 mm (4.0″ x 2.4″ x 1.8″)
- Antenna Length: 142mm(5.6″)
- Weight: 80 g (2.8 oz) without battery
Receiver (not included)
- Reception Sensitivity: 2 pV for 30 dB S/N
- Output Connector: 3.5 mm (1/8″)TRS
- Battery: LR6/AA size alkaline battery (not included)
- Current Consumption: 140 mA
- Dimensions 102 x 62.0 x 44.7 mm (4.0″ x 2.4″ x 1.8″)
- Antenna Length: 142mm(5.6″)
- Weight: 80 g (2.8 oz) without battery
FCC STATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference. (2) This device must accept any interference received, including
interference that may cause undesired operation.
Warning: Changes or modifications to this unit not expressly approved by
the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE: “This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement: The device has been evaluated to meet the general
RF exposure requirements. The device can be used in portable exposure
conditions without restriction.
HAPPY? LET US KNOW!
We love to hear from customers!
Share your experience with others by reviewing your product on Amazon.
Scan the QR code below or visit: amazon.com/review/review-your-
purchases#:
Act Now!
This product includes a 1-year limited warranty. If you register the product
within 30 days of purchase, you’ll receive an additional 1-year warranty
extension for a total of two years of protection.
To register your product and for full details on the warranty, visit
www.movophoto.com/warranty or scan the QR
code:
NOT HAPPY? LET US HELP!
Have any questions or concerns?
Our friendly and responsive customer service wants to make sure you have the
best experience possible!
Call us at 1-800-354-1739 (US)
Monday-Friday: 9 am – 4 pm (PST)
Email us at support@movophoto.com
Live to chat us at www.movophoto.com
Facebook & Youtube: /movophotogroup
Twitter & Instagram: @movophoto
www.movophoto.com
support@movophoto.com