MEE audio Connect T1N1 Bluetooth Wireless Headphone System For TV User Manual
- June 8, 2024
- mee audio
Table of Contents
User Manual
MEE audio Connect T1N1 Bluetooth Wireless Headphone System For TV
Includes Bluetooth Wireless audio Transmitter and Wireless Neckband In-Ear Headphones
CONNECT SUPPORT GUIDE
Scan QR code or enter the URL below into your web browser: MEEaudio.com/ConnectVid
COMPLETE ALL 4 STEPS. REMEMBER TO PLUG IN ONE POWER CABLE AND ONE AUDIO
CABLE
STEP 1
PACKAGE CONTENTS:
GETTING STARTED
CHARGE HEADPHONES
- Plug micro-USB power cable into the micro-USB power port of the N1.
- Plug the USB end of the cable into an AC adapter, TV, or computer USB port.
- Charge for 2 hours
- Proceed to STEP 2
STEP 2
POWER ON AND CONNECT
The Connect and N1 are paired and ready to use and will connect automatically once powered on.
- Slide the ON/OFF switch of the Connect to the ON position.
- Hold the Multifunction button on the N1 for 3 seconds to power on.
- A solid blue light will appear on the transmitter to indicate that a connection is established.
- If no solid blue light appears, perform the pairing procedure below. Otherwise, proceed to STEP 3
PAIR WITH BLUETOOTH HEADPHONES
This procedure is used to re-pair the N1 or to pair a different headphone with the Connect.
- Put your Bluetooth headphones in pairing mode. To put the N1 in pairing mode, hold the Power / Multifunction button for about 5 seconds until the status indicator light begins to flash red and blue and the headphone says “Ready to Pair”. Consult the user manual of your Bluetooth headphones if you are not sure how to put them in pairing mode.
- Once the headphones are in pairing mode, click Pairing button “A” once to put the Connect in pairing mode.
Blinking blue light will change to solid blue light once successfully paired. - Proceed to STEP 3
STEP 3: Choose ONLY ONE audio cable supported by your TV
STEP 4
ADJUSTING VOLUME
Maximize the volume level on your TV, then use volume controls on headphones to adjust to preferred volume.
If you are using the Optical cable, you may mute the TV speakers, which allows you to directly control the volume on your Bluetooth headphones.
Tap the Volume Up or Volume Down buttons on the N1 to adjust headphone volume.
WHEN FINISHED, power off headphones until next use.
Hold the Multifunction button on the N1 for 3 seconds to power off.
SUBSEQUENT USE
WHEN READY TO USE AGAIN, POWER ON THE HEADPHONES AND THEY WILL RECONNECT AUTOMATICALLY.
Do not put the Connect or your headphones into pairing mode.
A solid blue light on the Connect will indicate that a connection has been re- established.
NEED HELP?
VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL below into your web browser: MEEaudio.com/ConnectVid
ADDITIONAL INFORMATION
OVERVIEW:
LED INDICATOR LIGHTS
The status of the Connect is shown by a green power / charging indicator light on the rear of the unit and two blue indicator lights on the top as follows:
OPTIONAL: PAIR WITH 2ND BLUETOOTH HEADPHONES
A second set of Bluetooth headphones can be paired after one is already connected.
- Put the second headphone in pairing mode. Consult the user manual of your Bluetooth headphones if you are not sure how to put them in pairing mode.
- Once the headphones are in pairing mode, click Pairing button “B” once to put the Connect in pairing mode.
Blinking blue light will change to solid blue light once successfully paired.
FACTORY RESET/CLEAR MEMORY
To perform a factory reset of the Connect, power on the Connect and hold Pairing button “A” for approximately 5 seconds until the blue indicator light stops blinking.
All previously paired devices will be cleared from memory and a new pairing will need to be created by following the procedure in STEP 2
N1 OVERVIEW:
HOW TO WEAR THE N1
PAIRING WITH OTHER DEVICES
The N1 can be used as a headset when connected to phones and tablets. It will
first need to be paired with each device. To pair the N1 with a new device,
put it in pairing mode by holding the Multifunction button for about 7 seconds
until you hear the headset say “Pairing” and the light flashes red and blue.
Open the Bluetooth Settings menu on your device and turn on Bluetooth, Select “Search for Devices” or “Refresh” if your phone or tablet does not automatically search for new devices. Select “MEE audio N1” on the screen of your device and follow any further prompts to pair. Once connected, the status indicator light on the N1 will turn solid blue.
CONTROLS WITH PHONES AND TABLETS
*To start playing music, open a music app on your device and start playback.
**Not all devices support this functionality. For more information, refer to
the user manual for your device.
CONNECT FOR
ADDITIONAL SUPPORT
VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL below into your web browser:
MEEaudio.com/ConnectVid
QUESTIONS?
- Get answers at MEEaudio.com/ConnectHelp
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:00pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
SAFETY AND CARE
- Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
- The lifetime of the battery will be significantly reduced if your device is not charged for a long time. It is recommended to charge your device at least once a month.
- Clean with a soft, slightly damp cloth.
- Do not use chemical cleaners.
- There are no user replaceable/reparable parts in this device.
- Disassembling it will void your warranty.
WARNINGS
This device is designed and manufactured to operate within its
defined design limits. Misuse may result in electric shock or fire.
Read and follow these instructions carefully.
- To prevent fire or shock hazards, do not expose this unit to rain or moisture. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
- Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames, flammable gasses, or heat sources such as radiators or stoves
- Only use attachments/accessories specified by the manufacturer
Changes or modifications to this unit not expressly approved by MEE audio could void the user’s authority to operate the equipment.
Keep the device and packaging out of reach of children.
WARRANTY
MEE audio products purchased from authorized resellers are covered by a 1-year
manufacturer warranty. For more information, visit
MEEaudio.com/support
MEE audio and its logo are registered trademarks of S2E, Inc. All rights reserved. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license. Other trademarks and trade names are those of their respective owners.
Siri® and Apple TV® are registered trademarks of Apple Inc.
Power by
COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RULES
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations.
Because this product contains electronic components and a battery, it must be
disposed of separately from household waste. Contact local authorities to
learn about disposal and recycling options.
Read More About This Manual & Download PDF:
MEE audio Connect T1N1 Bluetooth Wireless Headphone System For TV User Manual
– Download [optimized]
MEE audio Connect T1N1 Bluetooth Wireless Headphone System For TV User Manual
– Download
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>