Hyundai Mobis FOB-4F60 Remote Keyless System Instructions
- June 6, 2024
- Hyundai Mobis
Table of Contents
Manual for vehicle manufacturer
Model name: FOB-4F60
OUTLINE
-
How to use FOB-4F60
• FOB-4F60 is a part of Remote Keyless System.
• This unit controls door lock/door unlock/tailgate open/panic/remote engine start-stop wirelessly. -
Introduction of Transmitter (FOB-4F60)
• These units use the battery
• Frequency is 433.92MHz
GENERAL DESCRIPTION
PRIMARY FUNCTION
- Remote door lock/door unlock/tailgate open/panic/remote engine start-stop
- Operating voltage: 3V DC
- Center freg.: 433.92MHz
MANUAL
-
LOCK Button
If the LOCK button is pressed, then TRANSMITTER sends the LOCK data. -
UNLOCK Button
If the UNLOCK button is pressed, then TRANSMITTER sends the UNLOCK data. -
TAILGATE Button
If the TAILGATE button is pressed, then TRANSMITTER sends TAILGATE data. -
PANIC Button
If the PANIC button is pressed, then TRANSMITTER sends PANIC data. -
Remote Engine Start-Stop Button
If the Remote Engine Start-Stop Button is pressed, then TRANSMITTER sends the Remote Engine Start-Stop data.
FCC/ISED NOTICE
[FCC] This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Caution: Any changes or modifications to this device not explicitly approved
by manufacturer could avoid your authority to operate this equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be collocated or operating
in conjunction with any other antenna or transmitter unless authorized to do
so by the FCC
[ISED] This device contains license-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science, and Economic Development Canada’s license-
exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter unless authorized to do so by the ISED