MEE audio Connect T1M3 Bluetooth Wireless Headphone System For TV User Manual
- June 8, 2024
- mee audio
Table of Contents
QUICKSTART GUIDE
HD WIRELESS SOUND FOR YOUR HD TV
Bluetooth® Wireless
Headphone System for TV
Includes Bluetooth Wireless Audio Transmitter
and Matrix3 Wireless HD Headphones
www.MEEaudio.com/T1M3
Model: T1M3
CONNECT SUPPORT GUIDE
Scan QR code or enter the URL below into your web browser:
MEEaudio.com/ConnectVid
COMPLETE ALL 4 STEPS. REMEMBER TO PLUG IN ONE POWER CABLE AND ONE AUDIO CABLE
STEP 1
PACKAGE CONTENTS:
GETTING STARTED
- Plug the micro-USB power cable into the micro-USB POWER port of the Connect.
- Plug the USB end of the cable into an AC adapter, TV, or computer USB port.
CHARGE HEADPHONES
- Plug micro-USB power cable into the micro-USB power port of the Matrix3.
- Plug the USB end of the cable into an AC adapter, TV, or computer USB port.
- Charge for 2 hours
STEP 2
POWER ON AND CONNECT
The Connect and Matrix3 are paired and ready to use and will connect automatically once powered on.
-
Slide the ON/OFF switch of the Connect to the ON position.
-
Hold the Multifunction button on the Matrix3 for 3 seconds to power on.
-
A solid blue light will appear on the transmitter to indicate that a connection is established
A SOLID BLUE LIGHT ON TRANSMITTER INDICATES CONNECTION -
If no solid blue light appears, perform the pairing procedure below. Otherwise, proceed to
STEP 3
PAIR WITH BLUETOOTH HEADPHONES
This procedure is used to repair the Matrix3 or to pair a different headphone with the Connect.
- Put your Bluetooth headphones in pairing mode. To put the Matrix3 in pairing mode, hold the Power / Multifunction button for about 5 seconds until the status indicator light begins to flash red and blue and the headphone says “Ready to Pair”. Consult the user manual of your Bluetooth headphones if you are not sure how to put them in pairing mode
- Once the headphones are in pairing mode, click Pairing button “A” once to put the Connect in pairing mode.
STEP 3
Choose ONLY ONE audio cable supported by your TV
STEP 4
ADJUSTING VOLUME
Maximize the volume level on your TV, then use volume controls on headphones to adjust to preferred volume.
If you are using the Optical cable, you may mute the TV speakers, which allows
you to directly control the volume on your Bluetooth headphones.
Tap the Volume Up or Volume Down buttons on the Matrix3 to adjust headphone
volume
WHEN FINISHED, power off headphones until next use
Hold the Multifunction button on the Matrix3 for 3 seconds to power off.
SUBSEQUENT USE
WHEN READY TO USE AGAIN, POWER ON THE HEADPHONES AND THEY WILL RECONNECT
AUTOMATICALLY.
Do not put the Connect or your headphones into pairing mode.
A solid blue light on the Connect will indicate that a connection has been re- established.
NEED HELP?
VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL below into your web browser:
MEEaudio.com/ConnectVid
ADDITIONAL INFORMATION
CONNECT OVERVIEW:
LED INDICATOR LIGHTS
The status of the Connect is shown by a green power/charging indicator light
on the rear of the unit and two blue indicator lights on the top as follows:
OPTIONAL: PAIR WITH 2ND BLUETOOTH HEADPHONES
A second set of Bluetooth headphones can be paired after one is already
connected.
- Put the second headphone in pairing mode. Consult the user manual of your Bluetooth headphones if you are not sure how to put them in pairing mode
- Once the headphones are in pairing mode, click Pairing button “B” once to put the Connect in pairing mode.
Blinking blue light will change to solid blue light once successfully paired.
FACTORY RESET/CLEAR MEMORY
To perform a factory reset of the Connect, power on the Connect and hold
Pairing button “A” for approximately 5 seconds until the blue indicator light
stops blinking.
All previously paired devices will be cleared from memory and a new pairing
will need to be created by following the procedure in STEP 2
MATRIX3 OVERVIEW:
CONTROLS WITH PHONES AND TABLETS
The headphone controls on the Matrix3 are located on the right earcup.
*To start playing music, open a music app on your device and start playback.
**Not all devices support this functionality. For more information, refer to
the user manual for your device.
PAIRING WITH OTHER DEVICES
The Matrix3 can be used as a headset when connected to phones and tablets. It
will first need to be paired with each device. To pair the Matrix3 with a new
device, put it in pairing mode by holding the Power / Multifunction button for
about 5 seconds until the status indicator light begins to flash red and blue
in an alternating pattern and the headphone says “Ready to Pair”.
Open the Bluetooth Settings menu on your device and turn on Bluetooth, Select
“Search for Devices” or “Refresh” if your phone or tablet does not
automatically search for new devices. Select “MEE audio Matrix3-LL” on the
screen of your device and follow any further prompts to pair. Once connected,
the status indicator light on the Matrix3 will turn solid blue.
FOR ADDITIONAL SUPPORT
VIEW OUR VIDEO SETUP GUIDE
Scan QR code or enter the URL below into your web browser:
MEEaudio.com/ConnectVid
QUESTIONS?
• Get answers at
MEEaudio.com/ConnectHelp
WE’RE HERE TO HELP!
Phone Support: 626-965-1008 x31
Monday ~ Friday 9am to 5:00pm PST
Email Support: support@MEEaudio.com
All emails are responded to within 2 business days
SAFETY AND CARE
-
Battery performance will be severely decreased when stored in extreme temperatures: below -10°C/14°F or above 45°C/113°F including direct sunlight.
-
The lifetime of the battery will be significantly reduced if your device is not charged for a long time. It is recommended to charge your device at least once a month.
-
Clean with a soft, slightly damp cloth.
Do not use chemical cleaners. -
There are no user-replaceable/reparable parts in this device.
Disassembling it will void your warranty.
WARNINGS
This device is designed and manufactured to operate within its defined design limits. Misuse may result in electric shock or fire. Read and follow these instructions carefully.
- To prevent fire or shock hazards, do not expose this unit to rain or moisture. If the device comes in contact with liquids, quickly wipe away. If submersed in water, do not turn the device on until completely dried. Note: liquid submersion voids the warranty.
- Danger of explosion or fire if batteries are damaged. Keep away from direct sunlight, naked flames, flammable gasses, or heat sources such as radiators or stoves
- Only use attachments/accessories specified by the manufacturer
Changes or modifications to this unit not expressly approved by MEE audio
could void the user’s authority to operate the equipment.
Keep the device and packaging out of reach of children.
WARRANTY
MEE audio products purchased from authorized resellers are covered by a 1-year manufacturer warranty. For more information, visit MEEaudio.com/support
MEE audio and its logo are registered trademarks of S2E, Inc. All rights
reserved.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by MEE audio is under license.
Other trademarks and trade names are those of their respective owners.
Qualcomm® aptX™ is a product of Qualcomm Technologies International, Ltd.
Qualcomm is a trademark of Qualcomm Incorporated, registered in the United
States and other countries, used with permission. aptX is a trademark of
Qualcomm Technologies International, Ltd., registered in the United States and
other countries, used with permission.
Apple TV® is a registered trademark of Apple Inc.
POWERED BY
COMPLIANCE INFORMATION
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC RULES
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Relocate the receiving antenna.
- Increase the separation between equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
DISPOSAL AND RECYCLING
Dispose of this product in accordance with all local laws and regulations.
Because this product contains electronic components and a battery, it must be
disposed of separately from household waste. Contact local authorities to
learn about disposal and recycling options.
MEE audio Connect T1M3 Bluetooth Wireless Headphone System For TV User Manual
– Download [optimized]
MEE audio Connect T1M3 Bluetooth Wireless Headphone System For TV User Manual
– Download