Delta Children 4 in 1 Crib Installation Manual

4 in 1 Crib

Read all instructions before assembly and use.
KEEP INSTRUCTIONS FOR FUTURE USE.

ADULT ASSEMBLY REQUIRED
Due to the presence of small parts during assembly, keep out of reach of children until assembly is complete.

THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE.

Consumer Care:
www.DeltaChildren.com
Delta Children’s Products
114 West 26th Street
New York, NY 10001
Tele.212-645-9033

Style #: ___
Lot: ___
Date: ___

Rev

When contacting Delta Consumer Care please reference the above information. Before contacting Delta Consumer Care please ensure that the information above matches the information found on the label on the Crib End bottom rail, please reference the information found on the product when contacting Delta Consumer Care.

To register your product for important safety alerts and updates to your product please visit www.DeltaChildren.com and click on Product Registration.

JULY 14, 2014, 24374, R1                        ©2014 DELTA ENTERPRISE CORP.

CAUTION:

ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4 BY 51 5/8 IN. WITH A THICKNESS NOT EXCEEDING 6 IN.

WARNING:

Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.
Failure to follow these warnings and the assembly instructions could result in serious injury or death. DO NOT use this crib if you cannot exactly follow the accompanying instructions.
*To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician.

• Strangulation Hazard: STRINGS CAN CAUSE STRANGULATION! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or attach strings to toys.
• Strangulation Hazard: To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.
• Strangulation Hazard: Do not place crib near window or patio door where cords from blinds or drapes may strangle a child.
• Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out. This crib has an adjustable mattress support. For the convenience of the parent when the baby is very small, the mattress support may be used in the highest position. Important: with the mattress support and mattress in the highest position, be absolutely sure that the top of the front crib side is at least 3 inches higher than the top surface of the mattress. If it is not, lower the mattress support and the mattress to the next highest position.
• Fall Hazard: Stop using crib when child begins to climb out or reaches a height of 35in. (89cm), whichever occurs first. The child should be placed in a youth or regular bed.
  Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. Do not use crib if any parts are missing, damaged or broken. Contact Delta Children’s Products for replacement parts and instructional literature if needed. Do not substitute parts.
  Follow warnings on all products in a crib.
  *If refinishing, use a non-toxic finish specified for children’s products.
• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.
  Infants can suffocate in gaps between crib sides and a mattress that is too small.
  Ensure a safe environment for the child by checking regularly, before placing the child in the crib, that every component is properly and securely in place.
  *To avoid head injury, do not allow any child to play underneath the crib.
• Never add an accessory such as a bassinet or changing table that extends over the sleeping area.
• In Canada Only – Use a crib mattress that is no thicker than 15 cm and is of such a size that, when it is pushed firmly against any side of the crib, it does not leave a gap of more than 3 cm between the mattress and any part of the sides of the crib. Do not use this crib for a child who can climb out of it or who is taller than 90 cm.

TODDLER BED

WARNING

INFANTS HAVE DIED IN TODDLER BEDS FROM ENTRAPMENT.
Openings in and between toddler bed parts can entrap head and neck of a small child.
NEVER use toddler bed with children younger than 15 months.
ALWAYS follow assembly instructions.
The maximum user weight is 50lbs (22.7kg)

WARNING

STRANGULATION HAZARD
NEVER place bed near windows where cords from blinds or drapes may strangle a child.
NEVER suspend strings over a bed.
NEVER place items with a string, cord, or ribbon, such as hood strings or pacifier cords, around a child’s neck. These items may catch on bed parts.

CAUTION

ENTRAPMENT HAZARD
To avoid dangerous gaps, any mattress used in this bed shall be a full-size crib mattress at least 51 5/8 in (1310mm) in length, 27 1/4 in (690mm) in width and a max thickness of 6 in (150 mm).

NOTES ON ASSEMBLY:

• During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions.
• To assemble this unit you may be required to place the unit on it’s side and face. It is strongly recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.

NOTES ON USE:
Keep children and others safe by following these simple rules:

• Do not allow any child to play on furniture
• Do not allow climbing on any piece of furniture.
• Do not allow hanging from any piece of furniture.
• Always monitor your child’s activity when in the nursery.

NOTES ON CARE AND MAINTENANCE:

• Do not scratch or chip the finish.
• Inspect the product periodically, contact Delta Children’s Products for replacement parts or questions.
• Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement. These extremes can cause a loss of structural integrity.
• To preserve the luster of the high quality finish on your product, it is recommended to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
• Do not use abrasive chemicals.
• Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and finish to peel.

PARTS: MAKE SURE THAT ALL PRE-ASSEMBLED PARTS ARE TIGHT.

A. Back Top Rail x 1 Part # 24365

B. Back Rail x 1 Part # 24366

C. Front Rail x 1 Part # 24367

D. Stabilizer Bar x 1 Part # 24368

E. Left Crib Side x 1 Part # 24369
F. Right Crib Side x 1 Part # 24370

G. Left Back Post x 1 Part # 24371    H. Right Back Post x 1 Part # 24372

J. Mattress Support x 1 Part # 24242

POUCH ATTACHED TO MATTRESS SUPPORT
– KEEP INSTRUCTIONS IN THIS POUCH AFTER ASSEMBLY.
WARNINGS RELATED TO THE SAFE USE OF THIS CRIB ARE PRINTED ON THE POUCH.

4

PARTS: HARDWARE KIT IS PART #24373-986 FOR COLOR 100 OR #24373-988 FOR COLOR 207. SEE FRONT COVER.

K. M6 x 75 mm Bolt x 10 Part # 5472

L. M6 x 55 mm Bolt x 6 Part # 5468

N. M6 x 18 mm Bolt x 4 Part # 5763

P. F4x30 mm Metal Pin x 2 Part # 5493

R. M6x17mm Barrel Nut x 14 Part # 5479

M4 Allen Wrench Supplied Part # 1177

No drills necessary. Do not use power screwdriver.

Flat Head Screwdriver (not supplied)

5

Section 1: Crib Assembly

Step 1

Parts and tools required to complete step.

       
E. Left Crib Side x 1                  F. Right Crib Side x 1

G. Left Back Post x 1      H. Right Back Post x 1

R. M6x17mm Barrel Nut x 4      M4 Allen Wrench Supplied

L. M6 x 55 mm Bolt x 4

Attach (1) Left Back Post (Part G) to (1) Left Crib Side (Part E) using (2) M6x55 mm Bolts (Part L) and (2) M6x17 mm Barrel Nuts (Part R). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment. Repeat with the Right Crib Side (Part F) and Right Back Post (Part H).

LEFT INSIDE BOTTOM LABEL, PRODUCT LABEL

Left Crib SideINSIDE

6

Section 1: Crib Assembly

Step 2

Parts and tools required to complete step.

From Step 1

B. Back Rail x 1

K. M6 x 75 mm Bolt x 2

M4 Allen Wrench Supplied

R. M6x17mm Barrel Nut x 2

Attach (1) Back Rail (Part B) to the assemblies from step 1 using (2) M6x75 mm Bolts (Part K) and (2) M6 x 17 mm Barrel Nuts (Part R). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.

7

Section 1: Crib Assembly

Step 3

Parts and tools required to complete step.

From Step 2

M4 Allen Wrench Supplied

A. Back Top Rail x 1

L. M6 x 55 mm Bolt x 2

K. M6 x 75 mm Bolt x 2

R. M6x17mm Barrel Nut x 2

Attach (1) Back Top Rail (Part A) to the assembly from step 2 using (2) M6x55 mm Bolts (Part L), (2) M6x75 mm Bolts (Part K) and (2) M6 x 17 mm Barrel Nuts (Part R). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.

8

Section 1: Crib Assembly

Step 4

Parts and tools required to complete step.

From Step 3

M4 Allen Wrench Supplied

N. M6 x 18 mm Bolt x 4

J. Mattress Support x 1

Attach the Mattress Support (Part J) in all corners using (1) M6x18 mm Bolt (Part N) in each corner. Tighten with the M4 Allen Wrench.

The Warnings printed on the pouch attached to the mattress support must face up, the springs must face up. This crib has (3) adjustment positions, use the highest only for new borns, move the mattress down as the child grows.

WARNING:

Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out.

WARNINGS ON POUCH MUST FACE UP.

ALL CORNERS

9

Section 1: Crib Assembly

Step 5

Parts and tools required to complete step.

From Step 4

C. Front Rail x 1

M4 Allen Wrench Supplied

R. M6x17mm Barrel Nut x 2

K. M6 x 75 mm Bolt x 2

Attach (1) Front Rail (Part C) to the assembly from step 4 using (2) M6x75 mm Bolts (Part K) and (2) M6 x 17 mm Barrel Nuts (Part R). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.

10

Section 1: Crib Assembly

Step 6

Parts and tools required to complete step.

From Step 5

P. Φ4×30 mm Metal Pin x 2

D. Stabilizer Bar x 1

M4 Allen Wrench Supplied

R. M6x17mm Barrel Nut x 4

K. M6 x 75 mm Bolt x 4

Attach (1) Stabilizer Bar (Part D) to the assembly from step 5 using (2) F4x30 mm Metal Pins (Part P), (4) M6x75 mm Bolts (Part K) and (4) M6 x 17 mm Barrel Nuts (Part R). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.

11

Section 1: Crib Assembly

Step 7

Parts and tools required to complete step.

Assembly Instruction Booklet

Store the assembly instruction booklet in the pouch attached to the mattress support. Store all parts and tools separately, in a safe place.

WARNING: SEE PAGE 2 FOR INFORMATION

12

Section 2: Toddler Bed Conversion

Step 1

Parts and tools required to complete step.

Finished Crib

M4 Allen Wrench Supplied

Remove the Front Rail and the Stabilizer Bar installed in Step 5 and 6 of Section 1 crib assembly.PULL GENTLY

13

Section 2: Toddler Bed Conversion

Step 2

Parts and tools required to complete step.

From Section 2 Step 1

D. Stabilizer Bar x 1

M4 Allen Wrench Supplied

R. M6x17mm Barrel Nut x 4

K. M6 x 75 mm Bolt x 4
Attach (1) Stabilizer Bar (Part D) to the assembly from section 2 step 1 using (4) M6x75 mm Bolts (Part K) and (4) M6x17 mm Barrel Nuts (Part R). Tighten with the M4 Allen Wrench. Use the Flat Head Screwdriver to hold the Barrel Nut in the proper alignment.

14

Section 2: Toddler Bed Conversion

Step 3

WARNING:

SEE PAGE 3 FOR
TODDLER BED WARNINGS

The mattress support must be in the lowest position.
Store all hardware safely.
Read all warnings on page 3.
As shown, use as a day bed or love seat sofa.
Do Not use without stabilizer bar installed.

Stabilizer bar must be used when converted to a toddler bed.

A toddler bed guardrail is available for this crib.
Please see your crib retailer, visit
www.DeltaChildren.com or contact Delta
Consumer Care for more information.
This crib uses Delta Style # 0080 Guardrail.

15

Section 3: Full Size Bed Conversion

Step 1

Parts and tools required to complete step.

M4 Allen Wrench Supplied

You have the option to convert the crib to a Full Size Bed. Simply follow the steps in reverse order to disassemble the crib. Stop after removing the left and right crib sides with the M4 Allen Wrench as shown.
Store all parts and hardware in a safe place.

16

Section 3: Full Size Bed Conversion

Step 2

Parts and tools required to complete step.

From Section 3 Step 1

N. M6 x 18 mm Bolt x 4

M4 Allen Wrench Supplied

Attach Bed Frame to the Headboard (From Section 3 Step 1) using (4) M6x18mm Bolts (Part N). Follow all instructions supplied with the Bed Frame. Note: Bed Frame System is not included, see you furniture or mattress retailer. Contact Delta Children’s Products for information or with questions.

17

Consumer Care:   www.DeltaChildren.com
Delta Children’s Products 114 West 26th Street New York, NY 10001Tele.212-645-9033

Warranty: This Delta Crib is warranted to be free from defects for a period of 1 year from the date of purchase under normal use. This warranty extends only to the original retail purchaser and is valid only when supplied with proof of purchase, or if received as a gift, when the registration is on file with Delta.

To register your product for important safety alerts and updates to your product please visit www.DeltaChildren.com

Please do not return this item to the store before contacting us about missing parts or with any questions.

To report a problem, please log on to www.DeltaChildren.com and click the Consumer Care Tab, or contact us by phone at 212-645-9033.

In the event that you need to contact our customer service department please have the Style Number and Lot Number available. Use the space below to make note of those numbers. They can be found on the label on the Crib End bottom rail.

STYLE No: 7380

COLOR              REV            FTY

Lot No. : __
Pack Date:
Date of Purchase: _____ (you should also keep your receipt)

Faqs

What does “4-in-1” mean for the Delta Children crib?

The term “4-in-1” refers to the versatility of the crib, which can be converted into four different configurations as your child grows. It typically includes a crib, toddler bed, daybed, and full-size bed.

How do I convert the Delta Children crib into a toddler bed?

To convert the crib into a toddler bed, you will need to remove the front rail or lower the side rail, depending on the specific model. The crib usually comes with a toddler guardrail that replaces the front rail to provide safety for your toddler.

Can I convert the Delta Children crib into a full-size bed?

Yes, many Delta Children 4-in-1 cribs can be converted into a full-size bed. However, please note that this conversion often requires an additional conversion kit, which is usually sold separately.

Where can I purchase the conversion kit for the Delta Children crib?

The conversion kit for the Delta Children crib can usually be purchased directly from the Delta Children website or from authorized retailers. Check the product’s manual or the Delta Children website for specific information on where to buy the conversion kit for your crib model.

Does the Delta Children crib come with a mattress?

Typically, the Delta Children crib does not come with a mattress. You will need to purchase a separate crib mattress that meets safety standards and fits the dimensions of the crib.

Is the Delta Children crib adjustable to different mattress heights?

Yes, most Delta Children cribs have adjustable mattress heights. This feature allows you to lower the mattress as your baby grows and becomes more mobile, ensuring their safety.

Are the materials used in the Delta Children crib safe for my child?

Delta Children is known for designing cribs with safety as a priority. They typically use non-toxic finishes and materials that meet or exceed safety standards established by ASTM (American Society for Testing and Materials) and CPSC (U.S. Consumer Product Safety Commission).

What colors is the Delta Children 4 in 1 crib available in?

The Delta Children 4 in 1 crib is available in several different finishes including white, gray, espresso, and dark chocolate.

Is the Delta Children 4 in 1 crib JPMA certified?

Yes, the Delta Children 4 in 1 crib is JPMA certified and meets or exceeds all ASTM and CPSC safety standards.

What is the warranty for the Delta Children 4 in 1 crib?

The Delta Children 4 in 1 crib comes with a limited warranty of one year from the date of purchase.

How do I clean the Delta Children crib?

It is best to refer to the specific cleaning instructions provided with your Delta Children crib. Generally, wiping down the crib with a damp cloth and mild soap is recommended. Avoid using harsh chemicals or abrasive cleaners that may damage the finish.

Delta Children 4 in 1 Crib-VIDEO

Delta Children 4 in 1 Crib Installation Manual – Download [optimized]
Delta Children 4 in 1 Crib Installation Manual – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>