Sorelle Modesto/Monterey Flat Top Crib Assembly Instruction

Sorelle Modesto/Monterey Flat Top Crib Assembly Instruction

Crib Warnings

*Infants can suffocate on soft bedding. Never add a pillow or comforter. Never place additional padding under an infant.

*Failure to follow these warnings and the assembly instructions could result in serious injury or death. DO NOT use this crib if you cannot exactly follow the accompanying instructions.

To reduce the risk of SIDS, pediatricians recommend healthy infants be placed on their backs to sleep, unless otherwise advised by your physician. Strangulation Hazard: STRINGS CAN CAUSE STRANGULATION! Do not place items with a string around a child’s neck, such as hood strings or pacifier cords. Do not suspend strings over a crib or attach strings to toys.

• Strangulation Hazard: To help prevent strangulation tighten all fasteners. A child can trap parts of the body or clothing on loose fasteners.

• Strangulation Hazard: Do not place crib near window or patio door where cords from blinds or drapes may strangle a child.

• Fall Hazard: When child is able to pull to a standing position, set mattress to lowest position and remove bumper pads, large toys and other objects that could serve as steps for climbing out. This crib has an adjustable mattress support. For the convenience of the parent when the baby is very small, the mattress support may be used in the highest position.

• Fall Hazard: Stop using crib when child begins to climb out or reaches a height of 35in. (89cm), whichever occurs first. The child should be placed in a youth or regular bed.

*Check this product for damaged hardware, loose joints, loose bolts or other fasteners, missing parts, or sharp edges before and after assembly and frequently during use. Securely tighten loose bolts and other fasteners. Do not use crib if any parts are missing, damaged or broken.Contact C&T International Inc./Sorelle for replacement parts and instructional literature if needed. Do not substitute parts.

*Follow warnings on all products in a crib.

*If refinishing, use a non-toxic finish specified for children’s products.

• Never use plastic shipping bags or other plastic film as mattress covers because they can cause suffocation.

*Infants can suffocate in gaps between crib sides and a mattress that is too small.

*Ensure a safe environment for the child by checking regularly, before placing the child in the crib, that every component is properly and securely in place.

*To avoid head injury, do not allow any child to play underneath the crib.

• Never add an accessory such as a bassinet or changing table that extends over the sleeping area.

CAUTION : ANY MATTRESS USED IN THIS CRIB SHALL BE AT LEAST 27 1/4” (69CM) x 51 5/8” (131CM) WITH A THICKNESS NOT EXCEEDING 6” (15CM).

NOTES ON ASSEMBLY:

• During the assembly process whenever using screws or bolts, check each by placing the screw/bolt on the diagram of the item which is drawn actual size and design. Be sure to use the proper size and shape specified in the instructions.
• To assemble this unit you may be required to place the unit on it’s side and face. It is strongly recommended that assembly is done on a soft, non-abrasive surface to avoid damaging the finish.

NOTES ON USE:

Keep children and others safe by following these simple rules:

• Do not allow any child to play on furniture
• Do not allow climbing on any piece of furniture.
• Do not allow hanging from any piece of furniture.
• Always monitor your child’s activity when in the nursery.

NOTES ON CARE AND MAINTENANCE:

• Do not scratch or chip the finish.
• Inspect the product periodically, contact C&T International Inc. for replacement parts or questions.
• Do not store the product or any parts in extreme temperatures and conditions such as a hot attic or a damp, cold basement. These extremes can cause a loss of structural integrity.
• To preserve the luster of the high quality finish on your product, it is recommended to place a doily or felt pad under any items you place on the finish.
• Clean with a damp cloth, then a dry cloth to preserve the original luster and beauty of this fine finish.
• Do not use abrasive chemicals. -Do not spray cleaners directly onto furniture.
• Lift slightly when moving on carpeting to prevent leg breakage.
• Use of a vaporizer near furniture will cause wood to swell and finish to peel.

Crib Assembly Parts

Crib Assembly

1. Step 1
   Use 4 pcs Bolt (b) with 4 pcs Half moon washer(d) and 2pcs Wooden dowel (e) attach Bottom Back Rail (K) to Left Back Post and Right Back post (G&F). As shown in Figure 1.
   
   Important: In order to properly assemble the crib, carry out the operations in order specified. Failure to assemble the crib in the manner recommended could make the crib hazardous.
   

2. Step 2
   Attach (J) Headboard Top Rail to Left Headboard Post (F) and Right Headboard Post (G) to using (2 pcs) Bolts with 2 pcs Half moon washer(d) as shown.
   

3. Step 3
   Use 6 pcs Bolts (c) with 6 pcs Washers(f) & 6pcs Lock Washers (g) to attach Left End(A) & Right End(B) to Headboard.
   Attach the Mattress Support Bar (D) Use 4 pcs Bolts (b) with 4 pcs Washers(f) & 4pcs Lock Washers (g) and 4 pcs Barrel Nut (h) to Left End(A) & Right End(B).
   

4. Step 4
   Attach the Mattress Support Use 4 pcs Bolts (a) with 4pcs Lock Washers (g)to attach Left End(A) and Right End (B)
   

5. Step 5
   Use 6 pcs Bolt (c) & 6 pcs Washers(f) & 6 pcs Lock Washers(g) attach Foot Board(C) to Left End (A) & the Right End (B). As shown in Figure 5.
   

FINALLY CHECK

• PRIOR TO USING THE CRIB, ENSURE ALL BOLTS ARE TIGHTENED. DO NOT OVER TIGHTEN.
• ENSURE THAT THE MATTRESS IS THE RECOMMENDED SIZE.
• ENSURE THE MATTRESS BASE IS LOCATED AT THE CORRECT LEVEL TO SUIT THE CHILD.
• CRIB IS NOW READY FOR USE.

TODDLER BED and FULL SIZE BED ASSEMBLY ( Option Purchase )

Note: The Toddler rail (#136) and Adult rail (#215) are sold separately to convert the crib to a Toddler bed and a full size bed for your choose.

Contact the store where you purchased the crib or visit www.sorellefurniture.com to locate a dealer near you

Disassembling Crib for Storage

To disassemble crib for storage, follow assembly steps in reverse.

Store all parts and hardware together in a safe place. Store the instruction manual in the supplied envelope attached to mattress support base for future reference for reassembly

Cleaning and Storage

To clean, use only mild household soap and warm water. DO NOT use bleach or detergent. DO NOT use abrasive cleaners which can scratch the finish. Use clean soft cloths to wash, rinse and dry. With proper care, the quality finish will last a long time. Wood surfaces may be treated with a light application of a good grade of non-toxic furniture polish. Read contents on back of polish to make sure polish will not harm unit.

Store all parts from Crib, which are not used for Full Size Headboard, in original carton(s) (if available) to prevent damage and allow reuse.

Sorelle Modesto/Monterey Flat Top Crib Assembly Instruction – Download [optimized]
Sorelle Modesto/Monterey Flat Top Crib Assembly Instruction – Download

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>