MSI MAG FORGE M100A PC Case User Guide
- June 16, 2024
- MSI
Table of Contents
- Accessories
- Specification
- SSD & HDD Installation
- Opening the Left & Right Side Cover
- Motherboard Installation
- Graphics Card Installation
- PSU Installation
- Control Board Specification
- ARGB Fan Connection (Only for MAG FORGE M100R)
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
MSI MAG FORGE M100A PC Case User Guide
Accessories
Item | Name / Q’ty | Used for |
---|---|---|
Cable ties x5 | Cable management | |
PCIe slot covers x2 | PCI slot protection |
(Only for MAG FORGE M100R)| 1 to 4
fan splitter cable x1| Connecting 4 fans
| Fan screws x2| Front 120/140mm fan
| Screw #6-32 10mm x2| Securing drive tray
| Screw #6-32 6.5mm x4| Motherboard stud
| Screw #6-32 6mm x6| PSU / PCIe card
| Screw #6-32 5mm x4| 3.5” HDD
| Screw M3 5mm x17| Motherboard / SSD
| Screw #6-32 4mm x3| 3.5” HDD
Specification
Size | Micro ATX Tower |
---|---|
Fan LED Controller | 1 to 6 ARGB (3 pin) Control Board ( MAG |
FORGE M100R)
**Pre-Installed Fan| MAG FORGE M100R Front: 3 x 120mm
ARGB fan Rear: 1 x 120 mm ARGB fan
MAG FORGE M100A Front: 3 x 120mm Auto RGB fanRear: 1 x 120 mm
Auto RGB fan
****Material| Chassis: Steel (SPCC 0.4/0.45 mm) Front
Bezel: Plastic + Mesh Right Side Panel: Steel
MAG FORGE M100R Left Side Panel: Tempered glass
MAG FORGE M100A Left Side Panel: Transparent acrylic
Dust Filters| Top: Magnetic
frame dust filter PVC mesh Bottom
dust filter
Fan Support| Top: 2 x 120 mmFront: 3 x 120 mmRear: 1 x 120 mm
Drive Bays| 2 x 2.5” SSD mounting brackets2 x 3.5” HDD trays
Expansion Slots| Supports 4 expansion slots
****IO Panel| 1 x Power button 1 x Reset button1 x Power
indicator 1 x Mic-in1 x Audio-out2 x USB 2.0 Type-A2 x USB 3.2 Gen1 Type-A 1 x
LED switch button(The LED switch function is only applicable to the MAG
FORGE M100R. )
Radiator Support**|
Top: 120/ 240 mm Front: 120 / 240 mm
Rear: 120 mm
**Clearance| CPU Cooler Height: Max 160mm (6.3 inch) Graphics Card
Length: Max 300 mm (11.81 inch) PSU Length: ATX 180mm (7.09 inch)Max 300 mm
(11.81 inch) without 3.5” HDD tray installed
Case Dimensions| 388(D) x 200(W) x 423(H) mm15.28(D) x 7.87(W) x
16.65(H) inch
Motherboard Support**| M-ATX / ITX
Case Features
Side & Front View
IO Panel
- Power button
- Reset button
- Power indicator
- Mic-in
- Audio-out
- USB 2.0 Type-A
- USB 3.2 Gen 1 Type-A
- LED switch button
LED switch control description:
- Short press the LED switch once to switch the LED effect.
- The LED will flash white once when you press and hold the LED switch for 3 seconds, and then the MSI motherboard Mystic Light synchronization mode will be enabled. Short press once to return the Hub control mode.
- To turn off the LED, press and hold the LED switch for 6 seconds
__Note
The LED switch function is only applicable to the MAG FORGE M100R .
SSD & HDD Installation
Opening the Left & Right Side Cover
MAG FORGE M100R
MAG FORGE M100A
Motherboard Installation
Graphics Card Installation
PSU Installation
Control Board Specification
Dimensions (mm) | 50 x 30 |
---|---|
Support LED Type | DC5V Addressable RGB LED |
**Connectors** | 1x LED switch connector 1x SATA power connector1x MSI |
motherboard JRAINBOW connector 6x 3-pin ARGB LED connectors
ARGB Pin Definition|
LED Effects (1 short press the LED switch)| LED effect
cycle:
- Rainbow
- Seven-color trailing
- Seven-color gradient
- Violet
- White
- Blue
- Cyan
- Green
- Yellow
- Red
- Rainbow breathing
- Red breathing
- Yellow breathing
- Green breathing
- Cyan breathing
- Blue breathing
- White breathing
- Violet breathing
- Fixed rainbow
- Red
- Yellow
- Green
- Cyan
- Blue
- White
- Violet
ARGB Fan Connection (Only for MAG FORGE M100R)
Note
Support up to 128 LEDs, Exceeding this limit will lead to overheating,
abnormal color or no light.