nVent HOFFMAN P2BP168 Proline G2 100MM Plinth Base Owner’s Manual
- June 28, 2024
- nVent HOFFMAN
Table of Contents
nVent HOFFMAN P2BP168 Proline G2 100MM Plinth Base
Product Information
Specifications
- Article Number: 31094
- Height: 3.94 in
- Width: 23.58 in
- Depth: 30.08 in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Jet Black
- Color Code: RAL 9005
- Thickness: 16 ga
- Type: 100mm
- Weight: 15 lb
Product Usage Instructions
The ProLine G2 Plinth Base is designed to be installed under an
enclosure to allow cables to enter from below. Follow these steps
for proper installation:
Installation Steps:
- Ensure the area where the plinth base will be installed is clean and free of any obstructions.
- Place the plinth base under the enclosure, aligning it properly to allow easy cable entry.
- Secure the plinth base in place using appropriate mounting hardware.
- Verify that cables can easily enter from below without any restrictions.
- Double-check the stability of the installation to ensure it can support the weight of the enclosure and cables.
ProLine G2 Plinth Bases are installed under an enclosure to provide space for cables to enter from below.
FEATURES
- Four access panels for cable management options at the base of the enclosure
- Sturdy cast aluminum corner supports for superior performance under load
- Corner blocks can be installed onto the base of the frame independent of the cover plates, enabling the cover plates to be attached after integration and just before shipment
- Stackable up to 400mm in height using Plinth Base Stacking Kit (not included)
- 100 mm or 200 mm options
- To maintain a NEMA Type 12 environmental rating, a gland plate must also be used in the base of the enclosure
- Installation hardware included
Installation hardware included
- Article Number: 31094
- Height: 3.94 in
- Width: 23.58 in
- Depth: 30.08 in
- Material: Mild Steel
- Finish: Powder Coated
- Color: Jet Black
- Color Code: RAL 9005
- Thickness: 16 ga
- Type: 100mm
- Weight: 15 lb
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication, or other
failure to completely follow nVent’s instructions and warnings may cause
product malfunction, property damage, serious bodily injury, and death and/or
void your warranty.
© 2024 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
FAQ
Q: Can the ProLine G2 Plinth Base be used with enclosures of different
sizes?
A: The ProLine G2 Plinth Base specified here fits enclosures of size
600x800mm. It is recommended to use the appropriate size plinth base for your
specific enclosure dimensions for optimal performance.
Q: Is the ProLine G2 Plinth Base suitable for outdoor installations?
A: The ProLine G2 Plinth Base is designed for indoor use. For outdoor
installations, consult nVent’s product instruction sheets and consider
environmental factors that may affect the product’s performance.
Q: How can I clean and maintain the ProLine G2 Plinth Base?
A: To clean the plinth base, use a soft cloth with mild soap and water.
Avoid abrasive cleaners that may damage the powder-coated finish. Regularly
inspect the base for any signs of wear or damage and address them promptly.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent