beatsstudio Wireless iOS 11 Quick Start Guide
- June 8, 2024
- beatsstudio
Table of Contents
- Quick Start Guide
- 1. TURN ON BLUETOOTH®
- 2. CONNECT BEATS STUDIO3 WIRELESS
- 3. START LISTENING
- USE WITH YOUR APPLE iCLOUD DEVICES
- WIRELESS SETUP FOR OTHER DEVICES*
- WIRELESS CONTROLS
- PURE ADAPTIVE NOISE CANCELING (PURE ANC)
- SWITCHING BETWEEN PURE ANC ON AND OFF
- WIRED PLAYBACK
- REMOTETALK CONTROLS
- CHARGE AND BATTERY STATUS
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
Quick Start Guide
Beatsstudio Wireless iOS 11
To connect to iPhone, follow steps 1–3 (compatible with iOS 10 or later). For all other devices, see later in this guide.
1. TURN ON BLUETOOTH®
Swipe up from the bottom of the screen and tap the Bluetooth icon or enable Bluetooth via Siri.
2. CONNECT BEATS STUDIO3 WIRELESS
Press power button for 1 second. Hold near unlocked iPhone, then follow onscreen instructions.
3. START LISTENING
USE WITH YOUR APPLE iCLOUD DEVICES
Beats Studio3 Wireless now works with your other devices signed into iCloud. Select Beats Studio3 in Control Center (iOS) or menu bar (macOS).
WIRELESS SETUP FOR OTHER DEVICES*
Press power button for 5 seconds until lights blink. On your device, go to Bluetooth settings and choose Beats Studio3.
- iOS 9 or earlier, Android™ and other Bluetooth enabled devices. / iOS 9 or earlier, Android and other Bluetooth enabled devices. / iOS 9 or earlier, Android and other Bluetooth enabled devices. / iOS 9 or earlier, Android and other Bluetooth enabled devices.
WIRELESS CONTROLS
During wireless use, control music and manage calls with “b” button and adjust volume above or below. Hold “b” button to activate Siri or voice command .*
- Functionality may vary on non-Apple devices.
PURE ADAPTIVE NOISE CANCELING (PURE ANC)
Pure ANC is enabled each time you power on Beats Studio3 Wireless, reducing external noise during playback.
SWITCHING BETWEEN PURE ANC ON AND OFF
To switch Pure ANC off for low power mode, double-press the power button while connected to your device. To turn Pure ANC back on, repeat this process.
WIRED PLAYBACK
Plug in the included RemoteTalk cable for wired mode.
REMOTETALK CONTROLS
Control music, manage calls, activate Siri or voice command, and adjust volume with RemoteTalk cable*
- Functionality may vary on non-Apple devices.
CHARGE AND BATTERY STATUS
Plug in a micro USB cable to charge headphones.
© 2017 Apple Inc. All rights reserved. Model: A1914. 034-02094-A.
The b logo, beats, beats studio, and remotetalk are trademarks of Beats
Electronics, LLC. Apple, iCloud, iPhone, macOS, Siri, and watchOS are
trademarks of Apple Inc., registered in the U.S. and other countries. Android
is a trademark of Google Inc. The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks
by Apple is under license. iOS is a trademark or registered trademark of Cisco
in the U.S. and other countries and is used under license.
Read More About This Manual & Download PDF:
beatsstudio Wireless iOS 11 Quick Start Guide – Download
[optimized]
beatsstudio Wireless iOS 11 Quick Start Guide –
Download
Questions about your Manual? Post in the comments!
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>