Powerbeats2 Wireless Earphone User Manual
- June 8, 2024
- beats by dre
Table of Contents
Powerbeats2 Wireless Earphone
Power
Press power/connect button to power on.
Press power/connect button to power off.
WIRELESS PAIRING
Press and hold power/connect button for 4 seconds to pair device.
Pair with device when LED is blinking.
PLACEMENT + FIT
Position earhook over the back of your ear.
Insert the earbud into the ear canal and adjust by twisting into position if
the fit is not right.
Adjust flexible earhook to fit securely around the
ear.
Adjust ear tip size if necessary.
CABLE MANAGEMENT
Adjust cable fit by gripping end of loop and sliding cable management clip in
either direction.
Remove cable management clip by gripping clip and pulling cable away from the
sides.
CHARGING
Open USB door to charge via a micro USB cable. 15 minute charge = 1hr
playback.
Remove USB cable from the device once LED changes from red to white and close
USB door.
CHARGE STATUS
White LED
White LED = Normal use
Red LED
Red LED = Under 1 hour of playback
Blinking Red LED
Blinking red LED = Under 15 minutes of playback
REMOTETALK ™ CONTROL
NEED MORE INFORMATION?
Visit beatsbydre.com/support
Software Updates
Product Registration
User Guide
Helpful Tips
Android” is a trademark of Google Inc. “Windows” is a registered trademark of Microsoft Corporation in the United States and other countries. Blackberry® is the property of Research In Motion Limited and is registered and/or used in the U.S. and countries around the world. Used under license from Research In Motion Limited. “powerbeats” and “RemoteTalk” are trademarks of Beats Electronics. “iPod”, “iPhone”and iPad” are trademarks of Apple Inc., registered in the U.S. and other countries.
beatsbydre.com
facebook.com/beatsbydre
twitter@beatsbydre
Powerbeats2 Wireless Earphone User Manual – Download
[optimized]
Powerbeats2 Wireless Earphone User Manual – Download