How do I install my replacement DIRECTV CINEMA® Connection Kit (Connected Home Adapter)?

Please follow these instructions:

1. Disconnect and remove the old Connected Home Adapter that was connected
   to the back of your router or DIRECTV Ready TV.

2. Reconnect the coax cable to your new DIRECTV CINEMA Connection Kit.

3. Reconnect the Ethernet cable to your new DIRECTV CINEMA Connection Kit.

4. Your kit contains two power cables: ESP-10 Power Supply and USB. You can use either to power your device.

Option 1: ESP-10 Power Supply (Recommended)

• Remove the old EPS-10 power supply and connect the new one to the DIRECTV CINEMA
  Connection Kit’s power port.

• Plug the power adapter into an outlet.

Option 2: USB Cable (Only available for DIRECTV Ready TV or router with a Micro USB port)

• Make sure your DIRECTV Ready TV or router is turned on.
• Remove the old USB cable and connect the new one to the DIRECTV CINEMA Connection Kit’s Micro USB port.

Check for a green power indicator on your DIRECTV CINEMA Connection Kit to confirm the power is on.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>