Razer Anzu FAQ and Manuals

: June 8, 2024
: Razer

Table of Contents

At a Glance: Razer Anzu | RZ82-03630 Specifications
FAQ
How do I activate low latency gaming mode on my Razer Anzu Smart Glasses?

At a Glance: Razer Anzu | RZ82-03630 Specifications

Introducing the new Razer Anzu cutting-edge audio glasses that protect your eyes and immerse your ears. With built-in speakers hidden in its frame, taking in the sights and sounds now has a whole new meaning.

Device Layout

Full Technical Specifications

Drivers	2 x 16 mm dynamic drivers
Weight	43-48 g
Microphones	2 microphones
Microphone pick-up pattern	Omnidirectional
Wearing style	Open ear
Package content

Smart Glasses with 35% blue light filtering lenses pre-installed
99% UVA/UVB protective polarized sunglass replacement lenses
USB-A charging cable
cleaning cloth
carrying case

Battery life| About 5 hours
Bluetooth Version| 5.2
Codecs| SBC, AAC

FAQ

What is the Razer Anzu and what is it best used for?

Razer Anzu is open-ear audio glasses that protect your eyes and immerse your ears. It is best used for working from home, consuming media, or enjoying outdoor activities.

Is the Razer Anzu battery-operated?

Yes, the Razer Anzu operates with a battery life of more than 5 hours so you’ll never run out during long gaming sessions

How to install replacement lenses on Razer Anzu Smart Glasses

To avoid issues or damages, it is very important to properly install replacement lenses to your Razer Anzu.

Here is the video on how to install replacement lenses to Razer Anzu.

Step-by-step process

Turn to the back of the frame of the Razer Anzu.
Apply firm pressure to the top of the lens.
Push firmly until the lens pops out.
Turn the frame around and align the new lens to the nose bridge corner.
Press along the lens’s edge firmly to snap it into place. Note: Once installed, you can rotate or adjust the lens for best fit.
Repeat steps 1 to 5 for the other lens.

You should now have successfully installed replacement lenses to your Razer Anzu Smart Glasses.

How do I power on/off my Razer Anzu Smart Glasses?

The glasses will automatically turn on when the temples are opened and will automatically turn off when the temples are closed.

How do I connect or pair my Razer Anzu Smart Glasses to a compatible

Bluetooth device?

For first time connection out of the box, place the Anzu Smart Glasses (with the temples closed) within one meter from your Bluetooth audio source.

Open the temples. The Razer Anzu is now in Bluetooth pairing mode.
Navigate to the audio source Bluetooth settings and turn on Bluetooth.
Scan for and connect to “Razer Anzu Smart Glasses”. You will hear an audible cue “Bluetooth Connected” from the Smart Glasses to confirm that they are connected to your device.
Upon first use, the glasses will go into pairing mode when the temples are opened. Otherwise, the glasses may be placed into pairing mode by touching and holding either temple for four seconds while in the open position.

Note: Once the Smart Glasses have been paired to a device, they will automatically try to connect to the last paired device every time the temples are opened.

How do I charge my Razer Anzu Smart Glasses?

Attach both sides of the included charging cable to the charging pins located on the temples. The charging points are magnetized to guide you to proper alignment.
Connect the other end to a compatible USB-A charging source. The blue lights on each side of the temples will illuminate to indicate charging. Battery status may be viewed from within the Razer Anzu app.

How to clean your Razer Smart Glasses

Wipe the glasses with a soft cloth that is lightly saturated with warm water. Be careful not to allow the liquid to penetrate the speakers. Once cleaned, use the included cleaning cloth to wipe the lenses.

How do I activate low latency gaming mode on my Razer Anzu Smart Glasses?

There are two ways to activate low latency gaming mode:

By tapping on the temple – Triple tap and hold the last tap for two seconds on either temple. You will hear an audible cue “Gaming Mode” to confirm that it has been activated. Doing the same gesture again will return the device to “Normal Mode”. You will hear an audible cue “Normal Mode” to confirm.
Through the app – Toggle Gaming Mode on/off in the Razer Anzu app. If audio drops/skips while in “Gaming Mode”, we recommend keeping your Smart Glasses within a closer distance to the audio source (within 2 ft / 60 cm) and switching to “Normal Mode” when not gaming.

How do I activate low latency gaming mode on my Razer Anzu Smart Glasses?

There are two ways to activate low latency gaming mode:

By tapping on the temple – Triple tap and hold the last tap for two seconds on either temple. You will hear an audible cue “Gaming Mode” to confirm that it has been activated. Doing the same gesture again will return the device to “Normal Mode”. You will hear an audible cue “Normal Mode” to confirm.
Through the app – Toggle Gaming Mode on/off in the Razer Anzu app. If audio drops/skips while in “Gaming Mode”, we recommend keeping your Smart Glasses within a closer distance to the audio source (within 2 ft / 60 cm) and switching to “Normal Mode” when not gaming.

I have paired my Razer Anzu Smart Glasses with different devices. How do I

switch between them?

If you have your Razer Anzu Smart Glasses paired to your smartphone as well as your laptop, the audio will only play from one source at a time, depending on which source you are currently connected to. If you are connected to your smartphone, then the audio from the smartphone will be played. If you want to switch hearing audio from your laptop, you’ll have to navigate into your smartphone’s Bluetooth setting to disconnect from it first, then connect to your laptop by navigating to your laptop’s Bluetooth settings.

How do I update the firmware of the Razer Anzu?

The Razer Anzu app is available from Google Play and Apple Store. Once you have it installed, it will notify you whenever a firmware update is available and will guide you through the installation process.

When paired to my laptop, audio intermittently cuts in and out.

If your laptop uses an Intel Wi-Fi module, try updating your Intel drivers by visiting Intel Driver & Support Assistant.

How do I pair both sides to each other when I get audio only from one side

of my Anzu Smart Glasses?

Turn the Smart Glasses off by closing the temples.
Wait six seconds.
Open the temples and see if the Smart Glasses have repaired with one another.
If the steps above did not work, tap and hold one of the temples for four seconds to activate pairing mode.