AMD Graphics Accelerator User’s Manual
- June 8, 2024
- AMD
Table of Contents
AMD Graphics Accelerator User's Manual
Copyright
© 2012 GIGABYTE TECHNOLOGY CO., LTD
Copyright by GIGA-BYTE TECHNOLOGY CO., LTD. (“GBT”). No part of this manual
may be reproduced or transmitted in any form without the expressed, written
permission of GBT.
Trademarks
Third-party brands and names are the properties of their respective owners.
Notice
Please do not remove any labels on this graphics card. Doing so may void the
warranty of this card. Due to rapid change in technology, some of the
specifications might be out of date before publication of this manual. The
author assumes no responsibility for any errors or omissions that may appear
in this document nor does the author make a commitment to update the
information contained herein.
Rovi Product Notice
This product incorporates copyright protection technology that is protected by
U.S. patents and other intellectual property rights. Use of this copyright
protection technology must be authorized by Rovi Corporation, and is intended
for home and other limited viewing uses only unless otherwise authorized by
Rovi Corporation. Reverse engineering or disassembly is prohibited.
Introduction
Minimum System Requirements
Hardware
– Motherboard with one or above PCI-Express x 16 slot
– 2GB system memory (4GB recommended)
– Optical drive for software installation (CD-ROM or DVD-ROM drive)
Operating System
– Windows ® 10
– Windows ® 8
– Windows ® 7
※ Expansion cards contain very delicate Integrated Circuit (IC) chips. To protect them against damage from static electricity, you should follow some precautions whenever you work on your computer.
- Turn off your computer and unplug power supply.
- Use a grounded wrist strap before handling computer components. If you do not have one, touch both of your hands to a safely grounded object or to a metal object, such as the power supply case.
- Place components on a grounded antistatic pad or on the bag that came with the components whenever the components are separated from the system.
The card contains sensitive electric components, which can be easily damaged by static electricity, so the card should be left in its original packing until it is installed. Unpacking and installation should be done on a grounded anti-static mat. The operator should be wearing an anti-static wristband, grounded at the same point as the anti-static mat. Inspect the card carton for obvious damage. Shipping and handling may cause damage to your card. Be sure there are no shipping and handling damages on the card before proceeding.
☛ DO NOT APPLY POWER TO YOUR SYSTEM IF THE GRAPHICS CARD IS DAMAGED.
☛ In order to ensure that your graphics card can work correctly, please use
official GIGABYTE BIOS only. Using non-official GIGABYTE BIOS might cause
problem(s) on the graphics card.
Hardware Installation
Now that you have prepared your computer, you are ready to install your graphics card.
Step 1.
Locate the PCI Express x16 slot. If necessary, remove the cover from this
slot; then align your graphics card with the PCI Express x16 slot, and press
it in firmly until the card is fully seated.
☛Make sure that the gold edge connector of the graphics card is securely inserted.
Step 2.
Replace the screw to fasten the card in place, and replace the computer cover.
※ If there are power connectors on your card, remember to connect the power cable to them, or the system will not boot. Do not touch the card when it’s operating to prevent system instability.
Step 3.
Connect the appropriate cable to the card and the display. Finally, turn on
your computer.
Software Installation
Notice the following guidelines before installing the drivers:
- First make sure your system has installed DirectX 11 or later version.
- Make sure your system has installed the appropriate motherboard drivers (For the motherboard drivers, please contact the motherboard manufacturer.)
※ Notice : The photos in this manual are for reference only and may not match what you exactly see on your screen
Driver and Utility Installation
Driver and XTREME ENGINE Installation
After installing the operating system, insert the driver disk into your optical drive. The driver Autorun screen is automatically displayed which looks like that shown in the screen shot on the right. (If the driver Autorun screen does not appear automatically, go to My Computer, double-click the optical drive and execute the setup.exe program.)
Step 1:
Choose Express Install to install driver and XTREME ENGINE at once, or
Customize Install to install them separately. Then click the Install item.
If choosing Express Install, the window of XTREME ENGINE installation would appear first as the following picture.
Step 2:
Click the Next button.
Step 3:
Click Browse to choose where you’d like GIGABYTE XTREME ENGINE to be
installed. And then click the Next button.
Step 4:
Click Browse to choose where you’d like to place the shortcuts in Start Menu.
And then click Next.
Step 5 :
Check the box if you’d like to create a desktop icon, and then click Next.
Step 6:
Click the Install button.
Step 7:
Click the Finish button to complete XTREME ENGINE installation.
Step 8:
After installing XTREME ENGINE, the window of AMD Driver Installer would
appear. Click Install.
Step 9:
Click Install to proceed.
Step 10:
Installation begins.
Step 11:
Click Restart Now to restart your computer in order to complete the driver
installation.
GIGABYTE XTREME ENGINE
Users could adjust clock speeds, voltage, fan performance, and LED etc. according to their own preference through this intuitive interface.
※ The interface and functionality of the software is subject to each model.
OC
Click on +/- , drag the control button or enter numbers to adjust GPU clock, memory clock, GPU voltage, power limit, and temperature.
Click on APPLY, the adjusted data will be saved in the profile on the upper left, click RESET to return to previous setting. Click DEFAULT to return to default setting.
ADVANCED OC
Easy Setting:
-
OC mode
High performance over clocking mode -
Gaming mode
Default setting gaming mode -
ECO mode
Energy saving, silent ECO mode
Advanced Setting:
Users could click on +/-, enter numbers, or move the white dots on the line
chart to adjust GPU clock and voltage.
FAN
Easy Setting:
-
Turbo
High fan speed to keep temperature low -
Auto
Default mode -
Silent
Low fan speed to keep noise low
Advanced Setting:
Users could enter numbers or move the white dots on the line chart to adjust
fan speed and temperature.
LED
Users could choose different styles, brightness, colors; they could also turn off the LED effects through this software.
If more than one graphics cards are installed, users could set different effects for each card by clicking EACH, or choose the same effect for every card by clicking ALL.
Troubleshooting Tips
The following troubleshooting tips may help if you experience problems. Contact your dealer or GIGABYTE for more advanced troubleshooting information.
-
Check whether the card is seated properly in the PCI Express x16 slot.
-
Ensure that the display cable is securely fastened to the card’s display connector.
-
Make sure that the monitor and computer are plugged in and receiving power.
-
If necessary, disable any built-in graphics capabilities on your motherboard. For more information, consult your computer’s manual or manufacturer.
(NOTE: Some manufacturers do not allow the built-in graphics to be disabled or to become the secondary display.) -
Make sure you selected the appropriate display device and graphics card when you install the graphics driver.
-
Restart your computer.
Presson your keyboard after system starts up. When the Windows Advanced Options Menu appears, select Safe Mode and press . After getting into Safe Mode, in Device Manager, check whether the driver for the graphics card is correct. -
If you are not able to find the desired monitor color/resolution settings: The color and screen resolution options available for selection depend on the graphics card being installed.
※ If necessary, adjust your monitor’s setting using monitor’s adjust panel to make the screen looks focused, crisp, and sharp.
Appendix
Regulatory Statements
Regulatory Notices
This document must not be copied without our written permission, and the
contents there of must not be imparted to a third party nor be used for any
unauthorized purpose. Contravention will be prosecuted. We believe that the
information contained herein was accurate in all respects at the time of
printing. GIGABYTE cannot, however, assume any responsibility for errors or
omissions in this text. Also note that the information in this document is
subject to change without notice and should not be construed as a commitment
by GIGABYTE.
Our Commitment to Preserving the Environment
In addition to high-efficiency performance, all GIGABYTE VGA Cards fulfill
European Union regulations for RoHS (Restriction of Certain Hazardous
Substances in Electrical and Electronic Equipment) and WEEE (Waste Electrical
and Electronic Equipment) environmental directives, as well as most major
worldwide safety requirements. To prevent releasing harmful substances into
the environment and to maximize the use of our natural resources, GIGABYTE
provides the following information on how you can responsibly recycle or reuse
most of the materials in your “end of life” product:
-
Restriction of Hazardous Substances (RoHS) Directive Statement
GIGABYTE products have not intended to add hazardous substances (Cd, Pb, Hg, Cr+6, PBDE and PBB). The parts and components have been carefully selected to meet RoHS requirement. Moreover, we at GIGABYTE are continuing our efforts to develop products that do not use internationally banned toxic chemicals. -
Waste Electrical & Electronic Equipment (WEEE) Directive Statement
GIGABYTE will fulfill the national laws as interpreted from the 2002/96/EC WEEE (Waste Electrical and Electronic Equipment) directive. The WEEE Directive specifies the treatment, collection, recycling and disposal of electric and electronic devices and their components. Under the Directive, used equipment must be marked, collected separately, and disposed of properly. -
WEEE Symbol Statement
The symbol shown on the left is on the product or on its packaging, which indicates that this product must not be disposed of with other waste. Instead, the device should be taken to the waste collection centers for activation of the treatment, collection, recycling and disposal procedure. The separate collection and recycling of your waste equipment at the time of disposal will help to conserve natural resources and ensure that it is recycled in a manner that protects human health and the environment. For more information about where you can drop off your waste equipment for recycling, please contact your local government office, your household waste disposal service or where you purchased the product for details of environmentally safe recycling.
☛ When your electrical or electronic equipment is no longer useful to you, “take it back” to your local or regional waste collection administration for recycling.
☛ If you need further assistance in recycling, reusing in your “end of life” product, you may contact us at the Customer Care number listed in your product’s user’s manual and we will be glad to help you with your effort.
Finally, we suggest that you practice other environmentally friendly actions by understanding and using the energy-saving features of this product (where applicable), recycling the inner and outer packaging (including shipping containers) this product was delivered in, and by disposing of or recycling used batteries properly. With your help, we can reduce the amount of natural resources needed to produce electrical and electronic equipment, minimize the use of landfills for the disposal of “end of life” products, and generally improve our quality of life by ensuring that potentially hazardous substances are not released into the environment and are disposed of properly. -
China Restriction of Hazardous Substances Table
The following table is supplied in compliance with China’s Restriction of Hazardous Substances (China RoHS) requirements:
Contact Us
-
GIGA-BYTE TECHNOLOGY CO., LTD.
Address: No.6, Baoqiang Rd., Xindian Dist.,
New Taipei City 231, Taiwan
TEL: +886-2-8912-4888
FAX: +886-2-8912-4003
Tech. and Non-Tech. Support
(Sales/Marketing) : http://ggts.gigabyte.com.tw
WEB address (Chinese): http://www.gigabyte.tw -
G.B.T. INC. – U.S.A.
TEL: +1-626-854-9338
FAX: +1-626-854-9339
Tech. Support: http://rma.gigabyte- usa.com
Web address: http://www.gigabyte.us -
G.B.T. INC (USA) – Mexico
Tel: +1-626-854-9338 x 215 (Soporte de habla hispano)
FAX: +1-626-854-9339
Correo: soporte@gigabyte-usa.com
Tech. Support: http://rma.gigabyte- usa.com
Web address: http://latam.giga-byte.com/ -
Giga-Byte SINGAPORE PTE. LTD. – Singapore
WEB address : http://www.gigabyte.sg -
Thailand
WEB address : http://th.giga-byte.com -
Vietnam
WEB address : http://www.gigabyte.vn -
GIGABYTE TECHNOLOGY (INDIA) LIMITED – India
WEB address : http://www.gigabyte.in -
NINGBO G.B.T. TECH. TRADING CO., LTD. – China
WEB address : http://www.gigabyte.cn-
Shanghai
TEL: +86-21-63410999
FAX: +86-21-63410100 -
Beijing
TEL: +86-10-62102838
FAX: +86-10-62102848 -
Wuhan
TEL: +86-27-87851312
FAX: +86-27-87851330 -
GuangZhou
TEL: +86-20-87540700
FAX: +86-20-87544306 -
Chengdu
TEL: +86-28-85236930
FAX: +86-28-85256822 -
Xian
TEL: +86-29-85531943
FAX: +86-29-85510930 -
Shenyang
TEL: +86-24-83992901
FAX: +86-24-83992909
-
-
Saudi Arabia
WEB address : http://www.gigabyte.com.sa -
Gigabyte Technology Pty. Ltd. – Australia
WEB address : http://www.gigabyte.com.au -
G.B.T. TECHNOLOGY TRADING GMBH – Germany
WEB address : http://www.gigabyte.de -
G.B.T. TECH. CO., LTD. – U.K.
WEB address : http://www.giga-byte.co.uk -
Giga-Byte Technology B.V. – The Netherlands
WEB address : http://www.giga-byte.nl -
GIGABYTE TECHNOLOGY FRANCE – France
WEB address : http://www.gigabyte.fr -
Sweden
WEB address : http://www.giga-byte.se -
Italy
WEB address : http://www.giga-byte.it -
Spain
WEB address : http://www.giga-byte.es -
Greece
WEB address : http://www.giga-byte.gr -
Czech Republic
WEB address : http://www.gigabyte.cz -
Hungary
WEB address : http://www.giga-byte.hu -
Turkey
WEB address : http://www.gigabyte.com.tr -
Russia
WEB address : http://www.gigabyte.ru -
Poland
WEB address : http://www.gigabyte.pl -
Ukraine
WEB address : http://www.giga-byte.com.ua -
Romania
WEB address : http://www.gigabyte.com.ro -
Serbia
WEB address : http://www.gigabyte.co.yu -
Kazakhstan
WEB address : http://www.giga-byte.kz
You may go to the GIGABYTE website, select your language in the language list at the bottom left corner of the website.
GIGABYTE Global Service System
To submit a technical or non-technical (Sales/Marketing) question, please link to: http://ggts.gigabyte.com.tw
Then select your language to enter the system.
AMD Graphics Accelerator User’s Manual – Download
[optimized]
AMD Graphics Accelerator User’s Manual – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>