Genius Ergo 9000S Wireless Bluetooth Mini Ergo Silent Mouse User Guide
- June 8, 2024
- GENIUS
Table of Contents
Ergo 9000S
Wireless Bluetooth
Mini Ergo Silent Mouse
Ergo 9000S Pro
Wireless Bluetooth Rechargeable
Mini Ergo Silent Mouse
Ergo 9000S Ergo 9000S Pro
Multi-language Quick Guide
Copyright© KYE SYSTEMS CORP.
Declaration of Conformity
The following designated product:
M/N: Ergo 9000S , Ergo 9000S Pro
is herewith confirmed to comply with the requirements set out in the Council
Directive on the Approximation of the Laws of the Member States relating to
Radio Equipment Directive (2014/53/EU). For the evaluation regarding the
electromagnetic compatibility, the following standards were applied:
■ EN 300 328 / EN 301 489-1 / EN 301 489-17 / EN 62479 / EN 62368-1
This declaration is prepared for the manufacturer: KYE SYSTEMS CORP.
No. 492, Sec. 5, Chongxin Rd., Sanchong Dist., New Taipei City 241017, Taiwan
(R.O.C.)
Ricky Chen
Project Manager of QACSD
KYE SYSTEMS CORP.
M/N: GM-230003
FCC ID NO.: FSUGMZMA
Rating: DC 5V ⎓ 100mA(Max)
www.geniusnet.com｜KYE Systems Corp.
MADE IN CHINA
KYE SYSTEMS CORP.
No. 492, Sec. 5, Chongxin Rd., Sanchong Dist.,
New Taipei City 241017, Taiwan
Ricky Chen
QADV Department
KYE SYSTEMS CORP
The frequency band of product is 2400 MHz – 2483.5 MHz and the radio-frequency
transmitted maximum power (equivalent isotropic radiated power, EIRP) less
than 10 mW.
Operating temperature: 0 ~ 40℃
Product storage conditions: Temperature: -20℃ ~ 50℃ / Humidity: 5%~ 85%
Symbol for Separate Collection in European Countries
This symbol indicates that this product is to be collected separately.
The following apply only to users in European countries:
-
This product is designated for separate collection at an appropriate collection point.
Do not dispose of as household waste. -
For more information, contact the retailer or the local authorities in charge of waste management.
Federal Communication Commission(FCC) interference statement:
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in particular installations. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient / Relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio / TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) this device may not cause harmful interference. and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
FCC CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user’s authority to operate the equipment.
RF exposure warning: The equipment complies with RF exposure limits set forth
for an uncontrolled environment. The antenna(s) used for this transmitter must
not be co-located or operating in conjunction with any other antenna or
transmitter.
You are cautioned that changes or modifications not expressly approved by the
party responsible for compliance could void your authority to operate the
equipment.
Disclaimer
The following does not apply to any country where such provisions are inconsistent with local law: KYE Systems Corp. makes no warranties with respect to this documentation, whether expressed or implied. All material is provided “as is”. This includes, but is not limited to, any implied warranties of merchantability and fitness is for a particular purpose. The information covered in this document is subject to change without notice.
KYE Systems Corp. assumes no responsibility for any errors that may appear in this document. All brand names mentioned in this manual are trademarks or registered trademarks of their respective companies.
Copyright KYE Systems Corp. All rights reserved.
Overview
Ergo 9000S
Open Battery Cover
|
- Receiver Storage
- Battery
- Battery life may vary based on user and computing conditions
---|---
Slide Up Power Switch ON
| 2.4GHz mode:
Plug and Play
Plug the receiver into your computer
Bluetooth mode:
Easy to pair and use
Ergo 9000S Pro
Open Battery Cover
|
Receiver Storage
---|---
How to charge the Ergo 9000S Pro with a USB-C cable
- Built-in rechargeable lithium-polymer battery
|
Open Power Switch
Button Assignment
Front
(1) Left button
(2) Scroll wheel with middle button
(3) Right button
(4) DPI switch
(5) Forward
(6) Backward
Back
USB-C rechargeable port (Ergo 9000S Pro)
(7) Mode button
Red : 2.4GHz (Default)
Orange : Bluetooth BT1
Green : Bluetooth BT2
(8) Power: On/Off
Bluetooth mode:
Easy to pair and use
| 2.4GHz mode:
Plug and Play
---|---
Connection Process
1. 2.4GHz mode (Red light flashes): Plug the receiver into USB port, and start working.
2. Bluetooth mode installation:
- BT 1 (Orange light flashes)
- BT 2 (Green light flashes)
Step (A) : Starting BT pairing
Long press Mode Button for 2 seconds into pairing mode
Step (B) : Pairing
Confirm the light flashes turn into the orange/green
Step (C) : Select pairing name
Choose Genius BluetoothM1 or Genius BluetoothM2
Step (D) : Pairing process done
Start working
3. Mode switching: Press Mode Button (A) to switch 2.4GHz/BT1/BT2
KYE Systems Corp.
No. 492, Sec. 5, Chongxin Rd., Sanchong Dist.,
New Taipei City 241017, Taiwan
Tel: 886-2-2995-6645 Fax: 886-2-2995-6649
Email: support@geniusnet.com (Tech. Support)
http://www.geniusnet.com
- For actual items, refer to the physical goods contained herein.
- Product storage conditions : Temperature: -20ºC~50ºC / Humidity : 5%~85%.
12030132400-A
References
- Каталог декларацій відповідності MTI
- Genius Support - Register your device, download driver and apps and choose product support
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>