Skullcandy S2TDW Sesh Earbuds User Guide
- June 7, 2024
- Skullcandy
Table of Contents
USER GUIDE
Skullcandy S2TDW Sesh Earbuds
Auto Pair Mode
Pairing Mode
Auto Power- On
Power – On
Auto Power- Off
Power – Off
Charge Earbuds
Charge Earbuds
ChargeCase
Charge Case
Pairing Mode
Pairing Mode
Pair New Device
Pair New Device
Power-On
Left Side 01 and Right Side 02
Power-On
Power-Off
Left Side 01
Power- Off
Play/Pause
Left Side 01 or Right Side 02
Play/Pause
Track Forward
Track Forward
TrackBack
Left Side 01
Track Back
Volume Up
Right Side 02
Volume Up
Volume+
Volume Down
Volume Down
Volume –
Answer/End
Left Side 01 or Right Side 02
Activate Voice Assistant
Left Side 01 or Right Side 02
Activate voice Assistant
Clear Paired Device
Left Side 01 and Right Side 02 Disconnected Mode
RestDevice
Questions Visit: www.skullcandy.com
Speaker Driver. 6mm, Impedance: 16 Ohms, THD <3%01KHz, Voltage Regulation:
5V, 500mA, Bluet0oth8 5.0, Frequency Band: 2402MHz — 2480MHz, Mairum Power.
<408m, Weight. 59.5g.
Skullcandy and other marks are registered trademarks of Skllcandy, Inc. All rights reserved
Maximum operating temperature 45C
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate
radio frequency energy and, ff not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur In a particular
Installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off
and on, the user Is encouraged to try to correct the interference by one or
more of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment Into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
ISED Compliance Statement
This device contains license-exempt transmitter(s/receiver(s) that comply with
Innovation, Science and Economic Development Canada’s license-exempt RSS(s).
Operation is subject to the following two conditions: (1)This device may not
cause interference. (2)This device must accept any Interference, Including
interference that may cause undesired operation of the device.
This equipment complies with FCC/ IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Americas
Skullcandy, Inc.
6301 N Landmark Dr.
Park City, UT 84098 U.S.A.
Skullcandy.com
Europe
Skullcandy Europe BV
Postbus 425
5500AK Ve
ldhoven Nederland
Skullcandy.eu
Canada
Skullcandy Canada ULC
329 Railway St. Unit 205
Vancouver, BC. V6A 1A4 Canada
Skullcandy.ca
Contains Li-ion battery. Battery must be
2 YEAR GLOBAL WARRANTY
The United States of America and Canada Product Purchases Only Skullcandy products are backed by a warranty. If it doesn’t work 2-year the way we promised, we’ll ake it right. For Guarantee Claims, Questions, and Terms & Conditions visit Skullcandy.com/warranty or call us at 1-888-MY SKULL.
Skullcandy products are backed by a 2-year warranty. If it doesn’t work the way we promised, we’ll make it right. Guarantee Claims, For Questions, and Terms & conditions visit Skullcarldy.com/warranty or email us at help- eu@skulcandy.com
Warning : To avoid hearing damage, do not listen at high volume levels.
Many electrical items can be repaired or recycled, saving natural resources and the environment, if you do not recycle, electrical equipment will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind your that old electrical equipment can be recycled, it is now marked with a crossed-out wheeled bin symbol, please do not throw any electrical equipment including those marked with the crossed-out wheeled bin symbol) in your bin.
Skullcandy S2TDW Sesh Earbuds User Guide – Download
[optimized]
Skullcandy S2TDW Sesh Earbuds User Guide – Download
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>