Skullcandy Rail True Wireless In Earbuds User Guide

: May 15, 2024
: Skullcandy

Table of Contents

Skullcandy Rail True Wireless In Earbuds
Power
Charge Earbuds
Voice control
FCC Compliance Statement
WARRANTY
SCANNER
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Skullcandy Rail True Wireless In Earbuds

Skullcandy-Rail-True-Wireless-In-Earbuds-PRODUCT

Power

Auto Power – On off

Power – On

Power – Off

Pairing Mode

Pair New Device

Play/Pause Answer Call

Reject/End Call

Track Forward

Stay-Aware Mode On/Off

Spotify Tap™

Either bud
While On
Spotify App Required

Find With TileT™

Re-Sync Earbuds

Charge Earbuds

Earbud LED’s turn RED to indicate charging.

Charge the Case

Reset Paired Device List

Voice control

Skullcandy-Rail-True-Wireless-In-Earbuds-FIG-19

Questions Visit: www.skullcandy.com
Maximum operating temperature 45°C.

Speaker Driver : 6mm,
Impedance: 22 Ohms, THD <3%@50Hz-10KHz, Voltage
Regulation : 3.7v, Bluetooth® 5.2,
Frequency Band: 2.402GHz – 2.480GHz, Maximum
Power: 12.1dBm. Weight: 62.5g.

Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple products) identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance. iPhone and Lightning are trademarks of Apple Inc., registered in the U.S. and other countries.”Android” is a trademark of Google Inc.Any use of such marks by Skullcandy, Inc. is under license

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

this device may not cause harmful interference,
this device must accept any interference received, including interference that may cause undesired operation.

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures.

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the receiver.
Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

ISED Compliance Statement
This device contains license-exempt transmitters)/receivers) that comply with

WARRANTY

1 YEARGLOBAL WARRANTY

Skullcandy products are backed by a 1-year warranty. If it doesn’t work the way we promised, we’ll make it right. For claims, questions, or Terms & Conditions: U.S. & Canada only: visit Skullcandy.com/warranty or call 1-888-MYSKULL All other countries: visit Skullcandy.com/support/international- support Many electrical items can be repaired or recycled, saving natural resources and the environment. If you do not recycle, electrical equipment will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. To remind you that old electrical equipment can be recycled, it is now marked with a crossed-out wheeled bin symbol. Please do not throw any electrical equipment (including those marked with the crossed-out wheeled bin symbol) in your bin. Many Local Authorities will have containers that collect batteries for recycling. Public buildings and your workplace may also have containers. If you do not recycle, batteries will end up in landfills where hazardous substances will leak out and cause soil and water contamination – harming wildlife and also human health. Batteries containing hazardous materials such as mercury (Hg), cadmium (Cd) or lead (Pb) are marked with their chemical symbols as well. This symbol means that according to local laws and regulations, the battery shall be disposed of separately from household waste. When this product reaches its end of life, take it to a collection point designated by local authorities or return it to the purchase location for Raminina Dr. Biennale

Innovation, Science and Economic Development Canada’s license-exempt RSS(s).

Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

FCC SAR statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the Federal Communications Commission (USA). These requirements set a SAR limit of 1.6 W/kg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification for use when properly worn on the head.

ISED SAR Compliance Statement

This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. The end user must follow the specific operating instructions to satisfy RF exposure compliance. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.operating in conjunction with any other antenna or transmitter.
The portable device is designed to meet the requirements for exposure to radio waves established by the ISED. These requirements set a SAR limit of 1.6 W/kgaveraged over one gram of tissue. The highest SAR value reported under this standard durina product certification for use when properly worn on the head.

Warning: To avoid hearing damage, do not listen at high volume levels.

SIMPLIFIED EU
DECLARATION OF CONFORMITY
Hereby, Skullcandy Internation GmbH declares that the radio equipment type [Model: S2RLW] complies with Directive 2014/53/EU. skullcandy.eu/product- documents

CAUTION
Risk of explosion if the battery is replaced by an incorrect type disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion; leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;a battery subjected to the extremely low air pressure that may result in an explosion or the leakage of flammable liquid or gas.

Contains a Li-ion battery. The battery must be recycled or disposed of properly.