Martin Jerry Single Pole WiFi Switch User Manual
- June 7, 2024
- Martin Jerry
Table of Contents
Martin Jerry Single Pole WiFi Switch
Power off the break
Find Neutral Wires
Make sure there is a neutral wire for the Wi-Fi switch. If not, the switches
cannot work properly. Neutral wires are white and NOT used by your old switch.
You can send us photos of the wiring status. Email: martinjerry01@outlook.com
Video1: How to find a neutral wire?
https://youtu.be/p2qzhD9Mz_w
Connect wires according the marks on the switch.
Notice:
- Three lines must be connected (Live Line, Load Line and Neutral Line);
- If you really cannot find out a Neutral Line in the outlet box, STOP installing the switch and consult with a professional electrician or contact our service team.
- After correct wiring, the switch must work well manually. Then, go to pair the switch on App.
FAQ:
-
How can I know it is connected correctly?
A: Press/Tap the switch button. It will work well manually after correct wiring. -
I cannot find the neutral wire in both outlet boxes; Can I still use this switch?
A: No, the neutral wire is necessary for the Smart Switch.
Although old switches do not need a neutral wire, there are spare white neutral wires in common outlet boxes. Please send us photos of the wires inside the outlet boxes for assistance. -
How can I find which one is the live (hot) line, which one is load line?
A: Besides the ground wire, there are two wires on your old switch in general:
Use a tester to check which one has power when the old switch is off status; You can connect them on wifi switch by trial and error;
Wiring Examples
Video2: Wiring Example of Single Pole
https://www.youtube.com/watch?v=JbbC_Bvk1Ag
References
- 📧martinjerry01@outlook.com
- SUPPORT | martinjerry
- WiFi Smart Switch install - YouTube
- Identifying a Neutral Wire - YouTube
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>