Martin Jerry US-STD-TC01 3-Way Wi-Fi Dimmer Switch User Manual
- June 6, 2024
- Martin Jerry
Table of Contents
US-STD-TC01 3-Way Wi-Fi Dimmer Switch
User Manual
Wi-Fi Dimmer Switch (3-Way) Contents Part 1: General……………………………………………………………………… 2
1.1.
Specification ……………………………………………….. 2
1.2.
Main Features …………………………………………….. 2
Part 2: Installation and Wire Connection…………………………………… 3
Part 3: Connect the WiFi Dimmer Switch to Wi-Fi ………………………. 5
Part 3: Connect the Dimmer Switch to Alexa……………………………. 15
Part 4: Connect the Dimmer Switch to Google Home………………… 18
1
Part 1: General 1.1. Specification
Item Product Name
Model Color Voltage Frequency Wattage
Description Wi-Fi Dimmer Switch (3-Way)
US-STD-TC01 White
100V-240VAC 50-60Hz
Max 400W (INC), 150W (CFL & LED)
1.2. Main Features
Dim Pad
Main Button Wi-Fi Button
Dimmer Indicator
Wi-Fi Indicator Restart
Works with Alexa & Google Assistant for voice control ONLY compatible with
2.4G Wi-Fi, DO NOT use it under 5GHz FREE iOS and Android App is available to
control it anywhere Set schedule and timing to automatically turn on/off
Manually turn on/off the switch by the Main Button Dimmer : Dimmable LED, CFL,
halogen & incandescent Bulbs
2
Part 2: Installation and Wire Connection Notice:
1. As the switch needs power for itself, three lines must be connected (Live
Line, Load Line & Neutral Line);
2. Please use the wire nuts to make the copper conductors fully concealed;
3. If you really cannot find a Neutral Line in your Power line outlet box,
STOP installing the switch and consult with a professional electrician or
contact our service team.
3
Step 1: Turn off power at the circuit breaker that controls the light switch.
Use voltage tester to confirm no voltage is present.
Step 2: Remove existing faceplate and light switch, then identify Live/Load,
Neutral and Ground lines.
Step 3: Connect the Smart Switch wiring with the provided wire connectors as
follows:
Black wire on switch (Live Line) Live Line White wire on switch (Neutral Line)
Neutral line Green wire on switch (Ground Line) Ground line
If use it as a Single Pole: Red wire on switch (Load Line) Load line to light
bulbs Capped the Brown wire
If use it for 3-way: Red & Brown wire on switch Travelers to slave switch
Please wrap electrical tape around the wire nuts to make sure the copper
conductor is fully concealed.
4
Part 3: Connect the Wi-Fi Dimmer Switch to Wi-Fi Step 1: Download the App Scan
the QR code or search “Smart Life” in the App Store or Google Play
5
Step 2: Register a New Account
Register with phone number or email address
Password must contain 6-20 letters and numbers
6
Step 3: Turn on the power at the circuit breaker. Press the
Wi-Fi Button and then the Wi-Fi Indicator light flashes quickly in
Red.
Flash Quickly in Red: Paring Mode (EZ mode) Constant Green Dimmer Indicator &
Wi-Fi Indicator: Power ON, Wi-Fi Connected Constant Red Wi-Fi Indicator: Lost
Wi-Fi Connection Dimmer Indicator OFF: Power OFF
Step 4: Tap + to Add a device in your App (Smartphone should connect to 2.4GHz Wi-Fi).
Step 5: Select “Dimmer Switch”
7
Step 6: Select 2.4 GHz Wi-Fi network and enter your password. (Your phone should have connected to the same Wi-Fi first)
Step 7: Select Confirm and tap Next.
8
Step 8: It will be added in around 20 seconds. —–If it fails, try to reconnect and contact the seller for help. After the device is added, Input a proper name and click “Done”.
Simple Names will be easier to be identified by Echo or Google Home.
9
Step 9: The switch is connected and you can control it by this App. If you need voice control, please refer to Part 3 for Alexa, Part 4 for Google Assistant.
Congratulations! Now you can turn on/off the smart dimmer switch via App on your smartphone.
If the above pairing method (EZ mode) fails several times, Please try AP mode as follows:
10
Step 10: Set the switch to AP mode
1. Press the Wi-Fi button once and you will see the indicator blinks quickly.
Step 11: After “Step 6: Select 2.4 GHz Wi-Fi network and enter your password,” Tap “EZ Mode” on the top right and select “AP Mode”.
2. Then press and hold the Wi-Fi button for 5-8s until the indicator blinks slowly.
11
Step 12: Select Confirm and tap Next.
Step 13: Connect your phone to the device’s hotspot like “Smart Life_xxxx”.
12
Step 13: After selecting hotspot like “Smart Life_xxxx” in Wi-Fi setting page, go back to the App and it will connect automatically.
Step 14: It will be added in around 20 seconds. After the device is added, Input a proper name and click “Done”.
13
FQA: 1. Cannot download the
right App. A: Please come back to step 1 and download by scanning the QR code.
Please use a smartphone rather than tablet.
3. No light comes out from the Main button/indicator
A: Please check the wire connection and press the restart button if necessary,
then the Wi-Fi Indicator will blink quickly.
2. Cannot discover the smart switch by App.
A: Make sure that your Wi-Fi router is 2.4GHz; DHPC is enabled in the Wi-Fi
router; the phone connects to the same Wi-Fi; the Wi-Fi indicator flashes
quickly.
14
Part 3: Connect the Dimmer Switch to Alexa Part 2 must be completed before doing this part 3
Step 1: Log in your Alexa account on a smartphone or a computer, then tap Home Skills
Step 2: Search “Smart Life” and select the right one according the blue logo (same with App)
15
Step 3: Enable the skill
Step 4: Login the account you registered on the App in Part 2, then click “Link Now”
The account and password should be the same as you registered in the Smart
Life App. DO NOT input your Alexa account or use another account.
16
Step 5: The Account is linked successfully, and then tap Authorize to Complete.
Congratulations! Alexa Devices (Echo) can control the Switch now.
To add or delete
switches, please delete or
add them in the Smart Life
App (see Part 2), and then
the Alexa will synchronize
automatically.
If you cannot see
the name of switches in the
Devices List in Alexa Page,
you can click “Discover” in
Alexa Page, it will
synchronize from the Smart
Life App.
17
NOTE: If you want to control your smart devices through Amazon Alexa. you
should assign a name to switch. After naming to your switch, Which name you
assigned to your switch that name should use in the command. For example, if
you set the switch name as “Bedroom light”, the supported voice commands are
as below: “Echo, turn ON Bedroom light”. (Bedroom light will ON) “Echo, turn
OFF Bedroom light”. (Bedroom light will OFF) “Echo, Set 50% to bedroom light”.
(Bedroom light brightness will set to 50%). “Echo, Set 70% to bedroom light”.
(Bedroom light brightness will set to 70%). Now you can control the smart
device with Amazon Alexa.
18
Part 4: Connect the Dimmer Switch to Google Home Part 2 must be completed
before doing this part 4 Step 1: Find “Home Control” in the hamburger menu on
the Google Home app’s home page ->Home Control -> tap “+”.
19
Step 2: Find “Smart Life” in the list.
Step 3: Input your Smart Life account and password you registered in Part 2, then tap “Link Now”.
20
Step 4: After you assign rooms for the switch, your switch will be listed in
the Home Control page.
Step 5: Control your smart switch through Google Home Now you can control your
smart switch through Google Home. If you set the name as “bedroom light”, the
supported voice commands are as below: Ok Google, turn on bedroom light. Ok
Google, set bedroom light to 50%.
21
Warning: Please install it by a professional electrician If there is radio
frequency interference, it might affect the
operation Indoor use only Do not use in bathroom and other damp locations
Please ensure that the light bulb is within the capacity of this
switch. INC 400W LED 150W CFL 150W Please keep the device out of the reach of
children for safety.
22