Martin Jerry US-FC-01 Smart Fan-Speed Control User Manual
- June 5, 2024
- Martin Jerry
Table of Contents
User Manual Smart Fan-Speed Control
Model: US-FC-01
Sep 2021
READ HERE FIRST !!!
- The switch must work well manually after installation. If not, go back to the wiring step as below. Single Pole US-FC-C01 (click here)
- The WiFi router should be 2.4G WiFi. CANNOT support 5G (802.11av).
An a. If you are using the dual-band wifi router, please set a separate SSID for the 2.4G.
b. If you are using google wifi, which you cannot set a name for 2.4G, please stay far enough from the wifi router until your phone indicates 2.4G wifi connected.
Video Demo: EZ mode for Wi-Fi Connection:https://www.youtube.com/watch?v =JGUM-pCfO7s
-
Download Smart Life App
Confirm that you have downloaded the right Smart Life App (The same Logo as the right side). If not, download it from the links
iPhone: https://itunes.apple.com/us/app/smart-life-smart- living/id1115101477?mt=8
Android: https://play.google.com/store/apps/details?id=com.tuya.smartlife&hl=en_US http://smartapp.tuya.com/smartlife?from=singlemessage&isappinstalled=0 -
Set the Switch to Pairing Mode
2.1. After wiring, you will see the 2. indicator flashes in RED on the switch. If not, press the 3. Wi-Fi Button. -
Pair the switch on App
If the above pairing method fails several times,
Please go to the AP mode mentioned incoming pages
Video Demo: AP Mode for Wi-Fi Connection
https://www.youtube.com/watch?v=dXEKoDysJCc
Step 1: Set the switch to AP mode
- Press and hold the power button for 5-8s until the indicator blinks quickly.
- Press and hold the power button for 5-8s until the indicator blinks slowly.
Step 2: Pair the switch on SmartLife App (AP mode)
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>