WALI Bookshelf Speaker Wall Mounting Bracket Installation Guide
- June 7, 2024
- WALI
Table of Contents
INSTALLATION MANUAL
SWM201XL
support@walielectric.com
This pack contains 2 speaker mounts Suitable for loads up to 25kg (55lbs) each speaker
UNPACKING INSTRUCTIONS
- Carefully open the carton, remove contents and layout on cardboard or other protective surfaces to avoid damage.
- Check package contents against the Supplied Parts List in the next page to assure that all components were received undamaged. Do not use damaged or defective parts.
- Carefully read all instructions before attempting installation.
IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before beginning the installation, and carefully follow all instructions contained herein. Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
- If you don’t understand these directions or have any doubts about the safety of the installation.
- If you are uncertain about the nature of your wall, consult a qualified installation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaims any and all liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
Supplied Parts List
CAUTION! This Speaker mount must be securely attached to the vertical wall. If the mount is not properly installed it may fall, resulting in possible injury and/or damage.
Tools R equired| • 3.8mm Drill Bit
• Phillips Screwdriver| • 8mm Masonry Bit
• Carpenter’s Level
---|---|---
Note: The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper mounting hardware for the Application.
Before You Start
Optional Speaker Wire Management
Step 1 : Mounting the Wall Bracket to the Wall
Step 2 : Attaching the Wall Bracket Cover and the Speaker Platform to Wall
Bracket
Step 3: Placing Speaker on the Platform, Adjust
Clamps to Hold Speaker in Place
Step 4 : OPTIONAL: Secure Speaker Using M4x12 Wood Screws
Step 5: Adjusting the Tilting Angle and Swing the Speaker
Documents / Resources
| WALI
Bookshelf Speaker Wall Mounting
Bracket
[pdf] Installation Guide
Bookshelf Speaker Wall Mounting Bracket, SWM201XL
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>