tp-link Wall Mountable Switches User Guide
- June 7, 2024
- Ptp-Link
Table of Contents
tp-link Wall Mountable Switches User Guide
1.1 Wall Mounting Preparation
Before mounting the switch, you need to prepare the tools below:
- A screw driver.
- Two screws which complies to the corresponding standard. For details, see Wall Mounting Specification
1.2 Wall Mounting Procedure
On the bottom of the panel, there are two mounting holes. You need to drive two screws into the wall, then mount the switch on the wall. Note that the switch should be mounted on the wall upright rather than sideways.
- Determine the location on the wall where you want to mount the switch.
- Mark the wall where the two mounting holes are. The distance between the two marks must be the same as that between the two mounting holes of the switch. For the wall-mounting-holes distance, see Wall Mounting Specification.
- Drive the screws into the wall at the marks using the screw driver. For the Screw-Head-to-Wall Minimum Distance, see Wall Mounting Specification.
- Mount the switch on the wall.
1.3 Wall Mounting Specification
Model
| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw- Head-to-Wall Minimum Distance|
Wall-Mounting-Holes Distance
---|---|---|---|---
LS105G| 4#, (5#), 6#| 7mm| 1.5mm| 76mm
LS108G| 4#, (5#), 6#| 7mm| 1.5mm| 65mm
LS1005G| 4#, (5#), 6#| 7mm| 1.5mm| 38mm
LS1008G| 4#, (5#), 6#| 7mm| 1.5mm| 48mm
TL-SF1005LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SF1005P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SF1006P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SF1008LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SF1008P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SF1009P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
TL-SG1005LP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SG1005P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 39mm
TL-SG1008D| 4#| 8mm| 2mm| 100mm
TL-SG1008P| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 105mm
Model
| Screw Standard of ANSI B1.1| Minimum Length of Screw| Screw- Head-to-Wall Minimum Distance|
Wall-Mounting-Holes Distance
---|---|---|---|---
TL-SG105| 4#, (5#), 6#| 7mm| 1.5mm| 39mm
TL-SG105E| 4#, (5#), 6#| 7mm| 1.5mm| 52mm
TL-SG105-M2| 4#, (5#), 6#| 7mm| 1.5mm| 150mm
TL-SG105PE| 4#, (5#), 6#| 7mm| 1.5mm| 39mm
TL-SG105S| 4#, (5#), 6#| 7mm| 1.5mm| 39mm
TL-SG108| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG108E| 4#, (5#), 6#| 7mm| 1.5mm| 110mm
TL-SG108-M2| 4#, (5#), 6#| 7mm| 1.5mm| 150mm
TL-SG108PE| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 94mm
TL-SG108S| 4#, (5#), 6#| 7mm| 1.5mm| 94mm
TL-SG116| 4#, 6#| 8.5mm| 1.5mm| 200mm
TL-SG116E| 4#, 6#| 8.5mm| 1.5mm| 200mm
TL-SG1210MP| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 150mm
TL-SG1210MPE| 4#, (5#), 6#, 8#| 8.5mm| 1.5mm| 150mm
TL-SG1210P| 4#, (5#), 6#, 8#| 7mm| 1.5mm| 150mm
TL-SG2008| 4#, (5#), 6#| 7mm| 1.5mm| 150mm
TL-SL1210MP| 4#, (5#), 6#, 8#| 7mm| 1.5mm| 150mm
TL-SX105| 4#, (5#), 6#| 7mm| 1.5mm| 150mm
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>