WARM AUDIO Warmdrive Overdrive Pedal User Guide
- June 3, 2024
- WARM AUDIO
Table of Contents
Warmdrive Overdrive Pedal
User Guide
THANK YOU
Thank you for purchasing the Warm Audio Warmdrive. We feel this product
delivers an accurate recreation in terms of sound, function, and vibe of a
legendary pedal. We don’t cut corners when it comes to what goes into our
products, and Warmdrive is no exception.
Bryce Young President Warm Audio Austin, Texas USA
Register your Warmdrive Before we begin, please take the time to visit
www.warmaudio.com to register your product. To
ensure you receive proper and uninterrupted warranty support for your product,
please register your unit within 14 days from purchase.
INTRODUCTION
The Warmdrive is a true reproduction of a highly revered pedal known for amp- like transparent overdrive and distortion tones. Just like the original, the Warmdrive goes from silky-smooth tones reminiscent of an overdriven amp at the sweet spot, all the way to sustain-rich, solo-ready distortion.
BASIC PEDAL LAYOUT & CONTROLS
- VOLUME Moving the knob clockwise increases the amount of “master volume” output coming from the pedal.
- GAIN Moving the knob clockwise increases the amount of clipping gain, or “distortion” coming from the pedal.
- TONE Moving the knob clockwise changes the tone (increased treble) after being clipped (gain added) by the op-amp.
- VOICE Moving the knob clockwise changes the tone (increased treble) of the signal before being clipped (gain added) by the op-amps.
- INPUT
- OUTPUT
- 9V DC POWER ADAPTER JACK
GET STARTED WITH SOME PREFERRED SETTINGS
TECHNICAL SPECIFICATIONS
- True Reproduction Of A Very “Zen” Overdrive Known For Legendary Amplifier Tones
- Premium components that match the original: 2N7000 MOSFETs, a NE5532 Op-Amp, Carbon Resistors, and 1N34A Germanium / Schottky BAT41 diodes
- True Bypass
- Volume, Tone, Gain, and Voice Controls
- Authentic Metal Enclosure with Carefully Tapered Knobs
- 1/4″ Input (Ins° And Output (Amp) Jacks
- Powered By 9v Battery Or Standard 9v Dc Pedal Adapter
- Power Consumption: 25 mA
- Length: 4.75″
- Width: 2.5″
- Height: 2.25″
- Weight: .75 lbs
WARRANTY STATEMENT
Warm Audio warranties this product to be free from defect in materials and
workmanship for one year from the date of purchase, for the original purchaser
to whom this equipment is registered. This warranty is non-transferrable. This
warranty is void in the event of damage incurred from unauthorized service to
this unit, or from electrical or mechanical modification to this unit. This
warranty does not cover damage resulting from abuse, accidental damage,
misuse, improper electrical conditions such as mis-wiring, incorrect voltage
or frequency, unstable power, disconnection from earth ground (for products
requiring a 3 pin, grounded power cable), or from exposure to hostile
environmental conditions such as moisture, humidity, smoke, fire, sand or
other debris, and extreme temperatures. Warm Audio will, at its sole
discretion, repair or replace this product in a timely manner. This limited
warranty extends only to products determined to be defective and does not
cover incidental costs such as equipment rental, loss of revenue, etc. Please
visit us at www.warmaudio.com for more information on your warranty, or to
request warranty service. This warranty applies to products sold in the United
States of America. For warranty information in any other country, please refer
to your local Warm Audio distributor. This warranty provides specific legal
rights, which may vary from state to state. Depending on the state in which
you live, you may have rights in addition to those covered in this statement.
Please refer to your state laws or see your local Warm Audio retailer for more
information.
NON-WARRANTY SERVICE
If you have a defective unit that is outside of our warranty period or
conditions; we are still here for you and can get your unit working again for
a modest service fee. Please visit us at
www.warmaudio.com to contact us about setting up a
repair or for more information.
With proper care, your Warm Audio gear should last a lifetime and provide a
lifetime of enjoyment. We believe the best advertisement we can have is a
properly working unit being put to great use. let’s work together to make it
happen.