WARM AUDIO WA-CV Centavo Professional Overdrive Pedal Instruction Manual
- June 8, 2024
- WARM AUDIO
Table of Contents
WARM AUDIO WA-CV Centavo Professional Overdrive Pedal
THANK YOU!
Thank you for purchasing the Warm Audio Centavo. We feel this product offers an accurate recreation of the most sought-after overdrive pedal of the 90’s and beyond. We don’t cut corners when it comes to what goes into our products, and Centavo is no exception.
Bryce Young
President
Warm Audio
Austin, Texas USA
Before we begin, please take the time to visit www.warmaudio.com to register your product. To ensure you receive proper and uninterrupted warranty support for your product, please register your unit within 14 days from purchase.
INTRODUCTION
The Warm Audio Centavo is an accurate recreation of the most sought-after overdrive pedal of the 90’s and beyond. Whether you’re after the fabled clean boost tones, and transparent overdrive, or you want to push your dirty channels to true grit – the Centavo has all of the adored tones of the vintage box. In addition, the Warm Audio Centavo has the infamous “MOD” selectable on the back. When in the “up” position, the low-end response on the bottom strings is extended. With a true-to-original, custom-cast “Champagne ” endosure & all the signature sounds of the original, Centavo delivers an authentically legendary pedal experience.
BASIC PEDAL LAYOUT & CONTROLS
-
GAIN
Moving the knob clockwise increases the amount of dipping gain, or “distortion” coming from the pedal. -
TREBLE
Controls the frequencies by boosting (clockwise) or cutting (counterclockwise) at 400Hz, working as an active high-pass filter -
OUTPUT
Moving the knob clockwise increases the amount of “master volume” output coming from the pedal -
MOD
When in the “up” position, the MOD switch changes the value on the high pass filter. This change extends low-end frequency response, especially on the lower two guitar strings -
INPUT
-
OUTPUT
-
9V DC POWER ADAPTER JACK
GET STARTED WITH SOME PREFERRED SETTINGS
TECHNICAL SPECIFICATIONS
- Accurate Recreation Of The Most Sought-After Overdrive Pedal of All Time
- Premium Components Including TL072 Op Amps, vintage-style diodes, and Charge-Pump Voltage Regulator
- Buffered Bypass Operation
- Gain, Treble, and Output Controls
- MOD Switch on Rear For Extended Low-End Response
- Custom-Cast “Champagne” Enclosure With Accurately Tapered Oxblood Knobs
- 1/4″ Input (Inst) And Output (Amp) Jacks
- Powered By 9v Battery Or Standard 9v De Pedal Adapter
- Power Consumption: 40mA
- Length: 5″
- Width: 6.75″
- Height: 2.25″
- Weight : 2 Lbs
WARRANTY STATEMENT
Warm Audio warranties this product to be free from defect in materials and workmanship for one year from the date of purchase, for the original purchaser to whom this equipment is registered. This warranty is non-transferable.
This warranty is void in the event of damage incurred from unauthorized service to this unit, or from electrical or mechanical modification to this unit. This warranty does not cover damage resulting from abuse, accidental damage, misuse, improper electrical conditions such as mis-wiring, incorrect voltage or frequency, unstable power, disconnection from earth ground (for products requiring a 3 pin, grounded power cable), or from exposure to hostile environmental conditions such as moisture, humidity, smoke, fire, sand or other debris, and extreme temperatures.
Warm Audio will, at its sole discretion, repair or replace this product in a timely manner. This limited warranty extends only to products determined to be defective and does not cover incidental costs such as equipment rental, loss of revenue, etc. Please visit us at www.warmaudio.com for more information on your warranty, or to request warranty service.
This warranty applies to products sold in the United States of America. For warranty information in any other country, please refer to your local Warm Audio distributor. This warranty provides specific legal rights, which may vary from state to state. Depending on the state in which you live, you may have rights in addition to those covered in this statement. Please refer to your state laws or see your local Warm Audio retailer for more information.
NON-WARRANTY SERVICE
If you have a defective unit that is outside of our warranty period or conditions; we are still here for you and can get your unit working again for a modest service fee. Please visit us at www.warmaudio.com to contact us about setting up a repair or for more information.
With proper care, your Warm Audio gear should last a lifetime and provide a lifetime of enjoyment. We believe the best advertisement we can have is a properly working unit being put to great use. Let’s work together to make it happen.