NITECORE Hunting Flashlight User Manual

: June 7, 2024
: Nitecore

NITECORE

NITECORE Hunting Flashlight

product

Powered by a 21700 Battery
Ultra Long Range Performance
Patented Power Indicator

Warranty Service

All NITECORE® products are warranted for quality. Any DOA / defective product can be exchanged for a replacement through a local distributor/dealer within 15 days of purchase. After that, all defective / malfunctioning NITECORE® products can be repaired free of charge within 60 months from the date of purchase. Beyond 60 months, a limited warranty applies, covering the cost of labor and maintenance, but not the cost of accessories or replacement parts.

The warranty will be nullified if

the product(s) is/are broken down, reconstructed and/or modified by unauthorized parties;
the product(s) is/are damaged due to improper use; (e.g. reversed polarity installation)
the product(s) is/are damaged due to battery leakage.

For the latest information on NITECORE® products and services, please contact a local NITECORE® distributor or send an email to service@nitecore.com
※ All images, text and statements specified herein this user manual are for reference purpose only. Should any discrepancy occur between this manual and information specified on www.nitecore.com, Sysmax Innovations Co., Ltd. reserves the rights to interpret and amend the content of this document at any time without prior notice.

Features

Utilizes a CREE XP-L HI V3 LED with a max output of 1,000 lumens
Maximum peak beam intensity of 95,500cd and maximum throw of 618 meters
An optical system combined with crystal coating and “Precision Digital Optics Technology” (PDOT)
Powered by a 21700 high capacity Li-ion battery while compatible with 18650 and CR123 batteries, to provide a runtime up to 950 hours
The tactical tail switch and the side switch control 5 brightness levels and 3 special modes
NITECORE 21700 USB-C rechargeable Li-ion battery (NL2150R 5,000mAh) included
A power indicator beneath the side switch indicates the remaining battery power (Patent No. ZL201220057767.4)
The power indicator can display the battery voltage (±0.1V)
High efficiency constant circuit provides a stable output
Incorporated Advanced Temperature Regulation (ATR) module (Patent No. ZL201510534543.6)
Electronic reverse polarity protection
Optical lenses with double-sided scratch resistant coating
Constructed from aero grade aluminum alloy
HA III military grade hard-anodized finish
Waterproof in accordance with IP68 (2 meters submersible)
Impact resistant to 1 meter

Specifications

Length: 155.5mm (6.12”)
Head Diameter: 50mm (1.97”)
Tube Diameter: 25.4mm (1”)
Tail Diameter: 27.2mm (1.07”)
Weight: 158.5g (5.59oz)

Accessories

NITECORE 21700 USB-C Rechargeable Li-ion
Battery (NL2150R 5,000mAh), Clip, Lanyard,
Spare O-ring, Spare Tail Switch Cover,
18650/CR123 Battery Magazine, Holster,
USB-C Charging Cable

Battery Options

	Type	Nominal Voltage	Compatibility
NITECORE NL2150R 5,000mAh	21700	3.6V	Y (Recommended)
21700 Rechargeable Li-ion Battery	21700	3.6V/3.7V	Y (Recommended)
18650 Rechargeable Li-ion Battery	18650	3.6V/3.7V	Y (Compatible)
Primary Lithium Battery	CR123	3V	Y (Compatible)
Rechargeable Li-ion Battery	RCR123	3.6V/3.7V	Y (Compatible)

Technical Data

FL1 STANDARD| TURBO| HIGH| MID| LOW| ULTRALOW| STROBE| SOS| BEACON
---|---|---|---|---|---|---|---|---
| 1,000

Lumens

| 400

Lumens

| 220

Lumens

| 70

Lumens

| 1

Lumen

| 1,000

Lumens

| 1,000

Lumens

| 1,000

Lumens

| *1h 15min| 4h| 7h| 23h| 950h| ─| ─| ─
| 618m| 425m| 299m| 175m| 21m| ─| ─| ─
| 95,500cd| 45,200cd| 22,300cd| 7,600cd| 110cd| ─| ─| ─
| 1m (Impact Resistance)
| IP68, 2m (Waterproof and Submersible)

Note: The stated data is measured in accordance with the international flashlight testing standards ANSI/
NEMA FL1, using 1 x 21700 Li-ion battery (5,000mAh) under laboratory conditions. The data may vary in real
world use due to different battery usage or environmental conditions.

The runtime for TURBO mode is tested without the temperature regulation.

Battery Installation

Operating Instructions

Battery Installation

Insert the battery(s) as illustrated and screw to tighten the tail cap.

Warnings:

Ensure the battery(s) is/are inserted with the positive end towards the head. The product will not work if the battery(s) is/are incorrectly inserted.
Please use the battery magazine when using 1×18650 / 2xCR123 batteries to avoid battery rattling and to ensure a stable contact.
CAUTION! Possible dangerous radiation! Don’t look into the light! Maybe dangerous for your eyes.
When the product is kept in a backpack or left unused for prolonged time, please remove all batteries to prevent accidental activation or battery leakage.

Tactical Momentary Illumination

Half press and hold the Tail Switch to turn on the light momentarily. Release to turn it off.

On / Off

On: When the light is off, press the Tail Switch until a click sound is heard to turn it on.
Off: When the light is on, press the Tail Switch until a click sound is heard to turn it off.

Brightness Levels

When the light is on, short press the Mode Button to cycle through the following brightness levels: ULTRALOW – LOW – MID – HIGH – TURBO.

Special Modes (STROBE / SOS / BEACON)

When the light is on, long press the Mode Button to access the STROBE Mode.
When the STROBE Mode is on, long press the Mode Button each time to cycle through the following special modes: STROBE – SOS – BEACON.
When one of the special modes is on, short press the Mode Button to exit special modes and access the previous memorized brightness level.

Note: The NEW P30 has mode memory. When reactivated, the flashlight will automatically access the previous memorized brightness level or STROBE mode (BEACON and SOS excluded).

Power Indication

When the light is off, click the Tail Switch while holding the Mode Button to access Power Indication. The blue power indicator beneath the Mode Button will flash to show the battery voltage (±0.1V). The flashlight will be automatically turned on after this process.

For example, when the battery voltage is at 4.2V, the power indicator will flash 4 times followed by a 1.5-second pause and 2 more flashes. Different voltages represent the corresponding remaining battery power levels:

When the light is on and the power level is close to 50%, the power indicator will flash slowly to inform the user. When the light is on and the power is close to depleted, the power indicator will flash quickly and continuously to inform the user.

ATR (Advanced Temperature Regulation)

The integrated ATR technology regulates the output of the NEW P30 according to the working condition and ambient environment to maintain the optimal performance.